Post and Discuss NorCal-related events here.
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by mark » Fri 13.05.2005, 20:41
My seats are in pretty sad shape, and I am shopping for new ones. While there are alot of websites that sell seats, and for pretty decent prices, I prefer to at least sit a few out before buying them. Does anyone know of stores in the bay area that actually have seats on display? Most places don't stock them but just have them dropped shipped from the distributors. The only place that I found so far is the shop at Infineon which carryies only Sparco.<br>thanks
-
mark
- Fanatic
-
- Posts: 359
- Joined: Fri 25.04.2003, 03:50
- Location: Palo Alto CA
by Doug » Fri 13.05.2005, 20:57
maybe call the maker and ask for local shops, then track them down that way :-/
-
Doug
- LEC Founder
-
- Posts: 7468
- Joined: Thu 17.04.2003, 06:43
- Location: Oregon Coast, USA
-
by JLSELAN » Sat 14.05.2005, 00:38
Mark, there's a Recaro dealer/distributor near me in Dublin and they had lots of seats to try out the last time I was there a few years ago. As you know, even when you find one you like, adapting and actually fitting it into the car can be a challange :).
-
JLSELAN
- Enthusiast
-
- Posts: 179
- Joined: Wed 23.04.2003, 05:06
- Location: Livermore, California
by mark » Sun 22.05.2005, 02:04
i went up to Infineon today to try out a few seats. almost all the aftermarket seats have "wings" that bulge out by the shoulders. And because of the rollbar shape, none of these are going to fit in the car. I'll have to look at getting my stock seats rebuilt, and see if bigger shoulder and thigh bolsters can be added for more support.<br><br>Does anyone know of a good seat shop that does custom work around the bay area?<br><br>
-
mark
- Fanatic
-
- Posts: 359
- Joined: Fri 25.04.2003, 03:50
- Location: Palo Alto CA
by mark » Mon 23.05.2005, 04:18
i just found a Corbeau seat that fits also, the GT7. It is about the same dimensions as the stock seat, with larger bolsters and holes for a harness - no shoulder wing.
-
mark
- Fanatic
-
- Posts: 359
- Joined: Fri 25.04.2003, 03:50
- Location: Palo Alto CA
by lotusgirlmarie » Wed 21.12.2005, 18:55
On the seat front, would any of the locals be interested in the Recaros I had im my car? Thay;re finally up for sale.
Must....................Go...............Faster
-
lotusgirlmarie
- Goddess
-
- Posts: 1434
- Joined: Thu 14.07.2005, 07:35
- Location: Earth or there abouts
by Doug » Wed 21.12.2005, 22:52
putting in some techno seats with subs in the headrests . . . ???
-
Doug
- LEC Founder
-
- Posts: 7468
- Joined: Thu 17.04.2003, 06:43
- Location: Oregon Coast, USA
-
by lotusgirlmarie » Sun 25.12.2005, 04:56
Not Quite...... Momo seats to finish out the car.
Must....................Go...............Faster
-
lotusgirlmarie
- Goddess
-
- Posts: 1434
- Joined: Thu 14.07.2005, 07:35
- Location: Earth or there abouts
by JLSELAN » Mon 26.12.2005, 00:10
lotusgirlmarie wrote:Not Quite...... Momo seats to finish out the car.
FINISH? Surely a dedicated Lotus owner can never be really finished
.
Here's the latest addition to my S3:
At any rate, Happy Holidays and Lotusing to one and all in the New Year!
You do not have the required permissions to view the files attached to this post.
-
JLSELAN
- Enthusiast
-
- Posts: 179
- Joined: Wed 23.04.2003, 05:06
- Location: Livermore, California
Return to Events - NorCal
Who is online
Users browsing this forum: No registered users and 1 guest