HARDTOP MOULDS MISSING / NOT RETURNED.

Moderators: theelanman, dapinky, Dave Eds, Nige, DaveT, Sy V, Elanlover, muley, Enright, algirdas, nitroman, clemo, Specky, GeoffSmith

Re: HARDTOP MOULDS MISSING / NOT RETURNED.

Postby ksixty » Thu 09.04.2020, 20:28

Did anything ever come of this post ?
ksixty
Newbie
 
Posts: 6
Joined: Sat 20.05.2017, 11:07

Re: HARDTOP MOULDS MISSING / NOT RETURNED.

Postby clemo » Thu 09.04.2020, 21:08

Nope ... the truth is out there somewhere but we haven't found it yet.
Jim Clark S2 - 1/12. The one with the Yellow spoke wheels . No 613 on dash (pushed in to factory in wrong order 615 on tub)
User avatar
clemo
LEC Administrator
 
Posts: 4964
Joined: Mon 21.04.2003, 23:24
Location: TORQUAY Devon. Cream first then Jam obviously.

Re: HARDTOP MOULDS MISSING / NOT RETURNED.

Postby housam » Thu 30.04.2020, 20:31

If it helps any one I have a hardtop in my garage but i"m not willing to lend it out if it doesn't come back. Thats if a mould could be remade from it. I bought it many moons ago from a lad in manchester direction. Think he was called Monty.
housam
Newbie
 
Posts: 9
Joined: Sat 19.12.2009, 13:38

Re: HARDTOP MOULDS MISSING / NOT RETURNED.

Postby CallMeLegend » Fri 29.05.2020, 08:37

I know a chap who could make a mould, could get a rough price if we could start with some photos of a hardtop & rome rough dimensions.
CallMeLegend
Fanatic
 
Posts: 323
Joined: Tue 26.05.2020, 08:42
Location: Bristol

Re: HARDTOP MOULDS MISSING / NOT RETURNED.

Postby Regbella » Sat 30.05.2020, 09:21

I have the capacity to manufacture hardtops (apachecanoes.com ) and have already sourced an Mgf hardtop and windscreen rails to make one for myself .if anyone already has a hard top that fits it would be an easy enough process to copy it
Regbella
Newbie
 
Posts: 2
Joined: Sun 24.05.2020, 09:16

Re: HARDTOP MOULDS MISSING / NOT RETURNED.

Postby 378S2 » Mon 21.09.2020, 07:13

Regbella wrote:I have the capacity to manufacture hardtops (apachecanoes.com ) and have already sourced an Mgf hardtop and windscreen rails to make one for myself .if anyone already has a hard top that fits it would be an easy enough process to copy it


Please put me on the order list, I'd love one - perversely for our hot summers rather than the rain so I will hide some silver foil under the lining. If you can get hold of one I can stump up a deposit. Would need to know costs before committing though.
Last edited by 378S2 on Wed 13.01.2021, 12:54, edited 1 time in total.
User avatar
378S2
Tinkerer
 
Posts: 78
Joined: Wed 09.09.2020, 02:19
Location: Australia

Re: HARDTOP MOULDS MISSING / NOT RETURNED.

Postby Burningflash » Wed 13.01.2021, 09:24

Hello guys,

I see your topic here and MAYBE I can help to produce a hardtop.
Iam a supplier for the company Dr. Hoehn https://www.roadranger.pl/ (so I have a good contact with them) who produce hardtops and they can make hardtops for us when they get an existing hardtop.

Question is how much pices should be produced? This information is needed to calculate the price
Burningflash
Newbie
 
Posts: 15
Joined: Thu 07.01.2021, 23:01
Location: Katowice, Poland

Previous

Return to Hood/Top, Bodywork and Fittings

Who is online

Users browsing this forum: No registered users and 1 guest