Door panel Cheater

[Tanz]

Described on the parts list as a door panel cheater. It is a piece of door trim that covers the wiring to the electric mirror. One of the previous owners has cut a hole in mine so I want to replace it. I think the part number is D100V0058F page 96 of the parts list, item 39 on the diagram. Its on the drivers door, RH side.




I put that part number into SJ's web site but not recognised.

Ant idea where I might get one?

[KenS]

There is a left and a right on ebay at the moment, but 3d print versions and quite pricey.

[Tanz]

Thanks for the reply KenS. New ones (3d printed?) are available on Ebay but £35. I put in an offer of £20 but haven't had a response yet. Might end up paying 35 as the existing panel looks a mess.

[HJ2]

see email, as PM's do not work currently...

[Rambo]

Part no looks to be correct for OSF

https://www.deroure.com/diagrams.asp?TB ... 0&ST=&SC=0

SJS is actually listing them as obsolete https://www.sjsportscars.com/parts-and- ... V0058F.htm?

Have you tried SW Lotus, Paul Matty, PNM and all the other usual suspects ie DVB etc.....

[zalo]

hello friend, I know it has nothing to do with the subject but I would like to know what springs you have put in the car to lower it? thank you

[plannerphil]

I'm looking for the left side door cheater panel (D100V0059F), it's missing from the car I just bought. I was just informed by SJ that these are no longer available. I also checked PNM.

I sent a DM to chrisP asking about his carbon fiber panels. Anyone know of a current source for other ones?

[bagpype]

I'm looking for the left side door cheater panel (D100V0059F), it's missing from the car I just bought. I was just informed by SJ that these are no longer available. I also checked PNM.

I sent a DM to chrisP asking about his carbon fiber panels. Anyone know of a current source for other ones?

Resurrecting an old thread as I too am in need of one for the right side of my Lotus. Any luck?

[plannerphil]

I ended up finding a 3D printed one in the UK on eBay. The seller was margaret_65, you could try messaging her to ask whether it's feasible to make more.

[bagpype]

I ended up finding a 3D printed one in the UK on eBay. The seller was margaret_65, you could try messaging her to ask whether it's feasible to make more.

Thank you! I’ll try to find her. Did you have to modify it to fit?

[plannerphil]

I didn't need to modify it, my body shop fit it when I had them do a bunch of other work. I don't know whether they used an adhesive or something to keep it in place.