Boot inside edge fiberglass repair

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Boot inside edge fiberglass repair

Postby roy666 » Tue 20.06.2023, 13:02

Hi all - has anyone had the same issue - the inner lip (edge) around the boot (bit which the seal is clipped on) has snapped; however, only in the front area near the lock (constant dragging of bags in and out I suppose). I'm thinking do I really need to do a fiberglass repair here... or can I just stick down a new seal of some sort directly to the surround? Advice gratefully accepted.. Mike
You do not have the required permissions to view the files attached to this post.
User avatar
roy666
Fanatic
 
Posts: 340
Joined: Thu 10.02.2011, 22:38
Location: Stamford, Lincs

Re: Boot inside edge fiberglass repair

Postby Tuga2112 » Tue 20.06.2023, 13:18

roy666 wrote:Hi all - has anyone had the same issue - the inner lip (edge) around the boot (bit which the seal is clipped on) has snapped; however, only in the front area near the lock (constant dragging of bags in and out I suppose). I'm thinking do I really need to do a fiberglass repair here... or can I just stick down a new seal of some sort directly to the surround? Advice gratefully accepted.. Mike


im confused.
why are you talking about a fibreglass repair ? i cant see any fibreglass damage in the picture ?
Still learning
Youtube Channel @Tuga2112 M100 repair videos
User avatar
Tuga2112
God
 
Posts: 3039
Joined: Fri 12.09.2014, 22:54
Location: Durham with a regular trip to Walsall

Re: Boot inside edge fiberglass repair

Postby dapinky » Tue 20.06.2023, 13:58

Mike,

I had this on mine - I did a repair with resin and mat - just a single thickness, nowt too difficult/exact - by the time I pushed the seal back on it wasn't visible (repair applied to inside edge) at all. Mine was caused by putting a plastic crate full of camping stuff in and out of the boot, and resting it on the edge..... easily done, but easily fixed!
Dave

Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it


...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
User avatar
dapinky
LEC Administrator
 
Posts: 10605
Joined: Sun 15.10.2006, 12:54
Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).

Re: Boot inside edge fiberglass repair

Postby roy666 » Wed 21.06.2023, 12:23

Thanks Dave - I think I will give it a go. I thought perhaps reinforcing/support that edge with a fibreglass strip of some sort; I'll let you know how it goes.
Tuga - the thin edge bit (for want of a better description), which the seal clips onto, has been snapped off in the picture; its flush with the surround of the boot. cheers M
User avatar
roy666
Fanatic
 
Posts: 340
Joined: Thu 10.02.2011, 22:38
Location: Stamford, Lincs


Return to Hood/Top, Bodywork and Fittings

Who is online

Users browsing this forum: No registered users and 3 guests