LGM Federal Tail light Valance

Moderators: theelanman, dapinky, Specky, Dave Eds, DaveT, Elanlover, Nige, muley, Enright, Sy V, algirdas, nitroman, clemo, GeoffSmith

Re: LGM Federal Tail light Valance

Postby Elanlover » Fri 02.04.2010, 03:43

Hi Marie, would my "custom" version be included in the ones you are hoping to finish by month's end? Thanks!
I do whatever my Rice Crispies tell me to do
User avatar
Elanlover
Moderator
 
Posts: 3471
Joined: Fri 05.08.2005, 19:11
Location: The Great White North

Re: LGM Federal Tail light Valance

Postby lotusgirlmarie » Wed 07.04.2010, 23:57

Progress report time. I have two, one CF and one standard all boxed up and ready to ship. Two more CF are entering the final srages of work and I'm finishing up the last of the basework for the final three. Lotos, you've got email.

Elanlover your panel is in the last group as I'll need to do alot of extra work to get it to sit properly.I appologize but I did misplace the length dimensions to get the side to side alignment. It is getting it's base as I write this.
Must....................Go...............Faster
User avatar
lotusgirlmarie
Goddess
 
Posts: 1434
Joined: Thu 14.07.2005, 07:35
Location: Earth or there abouts

Re: LGM Federal Tail light Valance

Postby Elanlover » Thu 08.04.2010, 00:19

Looking over some old PM's I see its 72cm in length. :-D
I do whatever my Rice Crispies tell me to do
User avatar
Elanlover
Moderator
 
Posts: 3471
Joined: Fri 05.08.2005, 19:11
Location: The Great White North

Re: LGM Federal Tail light Valance

Postby lotusgirlmarie » Thu 08.04.2010, 01:19

Thank you. I'll finish up the base tomorrow and hopefully get it trimmed
Must....................Go...............Faster
User avatar
lotusgirlmarie
Goddess
 
Posts: 1434
Joined: Thu 14.07.2005, 07:35
Location: Earth or there abouts

Re: LGM Federal Tail light Valance

Postby Elanlover » Thu 08.04.2010, 01:28

No worries Marie, don't take time away from other important things for this. I am planning on being away for 2 weeks starting Friday so even if you finished I wouldn't be home to take delivery. Feel free to work on other people's orders (or things more enjoyable) while we're away.
I do whatever my Rice Crispies tell me to do
User avatar
Elanlover
Moderator
 
Posts: 3471
Joined: Fri 05.08.2005, 19:11
Location: The Great White North

Re: LGM Federal Tail light Valance

Postby lotos » Thu 08.04.2010, 19:31

lotusgirlmarie wrote:Lotos, you've got email.

:cheers:
User avatar
lotos
God
 
Posts: 1687
Joined: Thu 26.08.2004, 04:48
Location: USA

Re: LGM Federal Tail light Valance

Postby lotusgirlmarie » Thu 08.04.2010, 22:31

Lotos, it's in the mail.

The second one will be shipped out next week.

Elanlover, I've made a bit of progress on your custom variant today. It still has a ways to go though.

The two other CF versions that are spoken for are curing. One goes to Matt RI the other to CliffyG. Cliff please chime in any time to let me know your around.

The last batch is getting based next week. Woo yours is in there. It's astandard if I remember. Are the other interested parties still interested? If not let me know.
Must....................Go...............Faster
User avatar
lotusgirlmarie
Goddess
 
Posts: 1434
Joined: Thu 14.07.2005, 07:35
Location: Earth or there abouts

Re: LGM Federal Tail light Valance

Postby Matt RI » Sun 11.04.2010, 04:48

Very excited! Who is better than you, Marie? ;)

Very much looking forward to this- all your effort is so very much appreciated...
I like traffic lights. But only when they're green...
User avatar
Matt RI
Fanatic
 
Posts: 359
Joined: Fri 10.12.2004, 04:42
Location: Rhode Island

Re: LGM Federal Tail light Valance

Postby lotusgirlmarie » Sun 11.04.2010, 20:16

Raining again. Progress stalled.

CliffyG, please chime in.
Must....................Go...............Faster
User avatar
lotusgirlmarie
Goddess
 
Posts: 1434
Joined: Thu 14.07.2005, 07:35
Location: Earth or there abouts

Re: LGM Federal Tail light Valance

Postby lotusgirlmarie » Wed 14.04.2010, 21:25

Quick updates on progress. I changed around some positioning to make it easier on me.

1. Ekapol Standard Paid Delivered
2. lotos CF PAID Delivered
3. Matt RI CF PAID in final stages
4. CliffyG CF dpst rec Final stages
5. Elanlover (SCV) in production
6. Algirdas Standard Boxed
7. Superbad
8. Woo
9. ???????? Standard
10.LGM

Woo or Superbad, would there be a chance one of you would be willing to go with a standard valance instead? I mada a mistake and only have one CF left on my rack. On a plus side though,I found two more glassfibre (Standard) variants. I'll be able to get these completed far faster than their CF counterpart at the same stage. Let me know.

Paging Mr. CliffyG. Please PM me when you can.
Must....................Go...............Faster
User avatar
lotusgirlmarie
Goddess
 
Posts: 1434
Joined: Thu 14.07.2005, 07:35
Location: Earth or there abouts

Re: LGM Federal Tail light Valance

Postby superbad » Fri 16.04.2010, 03:48

I would prefer a standard actually. Take your time on mine if it helps, I wouldn't be installing it soon anyway.
User avatar
superbad
Fanatic
 
Posts: 427
Joined: Sun 28.12.2008, 06:02
Location: Denver, CO

Re: LGM Federal Tail light Valance

Postby lotusgirlmarie » Fri 16.04.2010, 04:04

Standard it is then. Thank you. As an observation I seem to be sending a few of these to the CO area. Depending on timelines I may just bundle yours with Algidas' I that would work. It may be a month or so til it's sent out.

Revised list

1. Ekapol Standard Paid Delivered
2. lotos CF PAID Delivered
3. Matt RI CF PAID in final stages
4. CliffyG CF dpst rec Final stages
5. Elanlover (SCV) mid production
6. Algirdas Standard Boxed
7. Superbad Standard mid production
8. Woo CF mid production
9. ???????? Standard mid production
10.LGM whenever.

Made more progress today. Work will be getting in the way this weekend unfortunately though.
Must....................Go...............Faster
User avatar
lotusgirlmarie
Goddess
 
Posts: 1434
Joined: Thu 14.07.2005, 07:35
Location: Earth or there abouts

Re: LGM Federal Tail light Valance

Postby lotusgirlmarie » Fri 21.05.2010, 19:56

Well it's raining here again and in my long layover in San Francisco so no finish work today. I did however manage to get some progress made on all on the remaining valance yesterday after my trip. All of the remaining valance light pods have been trimmed ant lights test fitted plus a light general sand. I've also picked up 5 more LED light modules for the plate iluminatuion. I have a few days off next week and weather permitting will make more progress.

Still need to speak with CliffyG. If your out there or if anyone can give him a call/email that would be greatly appreciated.
Must....................Go...............Faster
User avatar
lotusgirlmarie
Goddess
 
Posts: 1434
Joined: Thu 14.07.2005, 07:35
Location: Earth or there abouts

Re: LGM Federal Tail light Valance

Postby lotusgirlmarie » Sun 27.06.2010, 19:13

Superbad please PM me your addy. Panel is done. I'd like to get it shipped by weeks end if possible.
Must....................Go...............Faster
User avatar
lotusgirlmarie
Goddess
 
Posts: 1434
Joined: Thu 14.07.2005, 07:35
Location: Earth or there abouts

Re: LGM Federal Tail light Valance

Postby lotusgirlmarie » Thu 15.07.2010, 23:20

Quick update

1. Ekapol Standard Paid DELIVERED
2. lotos CF PAID DELIVERED
3. Matt RI CF PAID in final stages
4. CliffyG CF dpst rec Final stages
5. Elanlover (SCV) Final Stages
6. Algirdas Standard Boxed
7. Superbad Standard DELIVERED
8. Woo CF mid production
9. Mac II Standard mid production
10.LGM whenever.

I have a spot of time at the end of the month to make more headway on these. Time has been a bit short as of late with work and all. 6-7 day work weeks are murderous.
Must....................Go...............Faster
User avatar
lotusgirlmarie
Goddess
 
Posts: 1434
Joined: Thu 14.07.2005, 07:35
Location: Earth or there abouts

Re: LGM Federal Tail light Valance

Postby lotusgirlmarie » Fri 16.07.2010, 06:22

Last spot now spoken for.

Still paging CliffyG. PM me when you get the chance.
Must....................Go...............Faster
User avatar
lotusgirlmarie
Goddess
 
Posts: 1434
Joined: Thu 14.07.2005, 07:35
Location: Earth or there abouts

Re: LGM Federal Tail light Valance

Postby superbad » Tue 20.07.2010, 22:35

Beautiful. Thanks LGM!
Image

Uploaded with ImageShack.us
User avatar
superbad
Fanatic
 
Posts: 427
Joined: Sun 28.12.2008, 06:02
Location: Denver, CO

Re: LGM Federal Tail light Valance

Postby lotusgirlmarie » Wed 21.07.2010, 01:27

No worries. Sorry I took so long to get it done. Each one made is custom fit and finished. Truely hand made sculpture. There should also be a fastener packet as well as the plate light and wiring. Test fit the valance before paining to ensure proper fit. The only bit you will need is an original lotus emblem. I think you'll live the outcome.

Ironically enough I'm sitting in Denver International as I write this.
Must....................Go...............Faster
User avatar
lotusgirlmarie
Goddess
 
Posts: 1434
Joined: Thu 14.07.2005, 07:35
Location: Earth or there abouts

Re: LGM Federal Tail light Valance

Postby lotusgirlmarie » Sat 25.09.2010, 05:58

Update.

1. Ekapol Standard Paid DELIVERED
2. lotos CF PAID DELIVERED
3. Matt RI CF PAID in final stages
4. CliffyG CF dpst rec Finished
5. Elanlover (SCV) Final Stages
6. Algirdas Standard Boxed
7. Superbad Standard DELIVERED
8. Woo CF mid production
9. Mac II Standard Finished
10.LGM whenever.

I just need to box them up and send them off. I think I still have your addy Cliff but just in case could you PM me again. Mac II I need an addy and we'll set up payment. Weather is finally cooperating but my schedual still isn't. Upside though, I have a few days off at the beginning of October to get futher along with the remaining valance.
Must....................Go...............Faster
User avatar
lotusgirlmarie
Goddess
 
Posts: 1434
Joined: Thu 14.07.2005, 07:35
Location: Earth or there abouts

Re: LGM Federal Tail light Valance

Postby lotusgirlmarie » Mon 04.10.2010, 04:15

Update.

1. Ekapol Standard Paid DELIVERED
2. lotos CF PAID DELIVERED
3. Matt RI CF PAID in final stages
4. CliffyG CF dpst rec DELIVERED
5. Elanlover (SCV) Final Stages
6. Algirdas Standard Boxed
7. Superbad Standard DELIVERED
8. Woo CF mid production
9. Mac II Standard Finished
10.LGM whenever.

Mac II I need one more connector which i'm picking up tommorrow for the plate light and yours should ship just after. Matt and Elanlover, your are next on my to finish up list. Weather/work permitting I'll knock them out as soon as possible.
Must....................Go...............Faster
User avatar
lotusgirlmarie
Goddess
 
Posts: 1434
Joined: Thu 14.07.2005, 07:35
Location: Earth or there abouts

PreviousNext

Return to Hood/Top, Bodywork and Fittings

Who is online

Users browsing this forum: Google [Bot] and 2 guests