Bumpers

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Bumpers

Postby Paul.P » Mon 10.07.2006, 18:56

Ok folks, so whats the bumpers made of, i think its not fibreglass, but don't know what it is made of.
My bodyshop needs to know, to do repairs.
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
Paul.P
God
 
Posts: 4970
Joined: Sun 14.12.2003, 18:18
Location: Oakham, Rutland

Postby Gary » Mon 10.07.2006, 19:38

plastic?
Ex owner of S2 no 480 and Red SE
User avatar
Gary
God
 
Posts: 2284
Joined: Thu 14.07.2005, 18:04
Location: Rutland

Postby F1 LOTUS » Mon 10.07.2006, 20:26

'Flexible reinforced polyurethane'
User avatar
F1 LOTUS
God
 
Posts: 2199
Joined: Thu 17.04.2003, 18:17
Location: SoCal, USA

Postby Paul.P » Mon 10.07.2006, 20:39

F1 LOTUS wrote:'Flexible reinforced polyurethane'


Now thats a more sensible answer, cheers mate !
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
Paul.P
God
 
Posts: 4970
Joined: Sun 14.12.2003, 18:18
Location: Oakham, Rutland

Postby F1 LOTUS » Mon 10.07.2006, 20:52

...or vinegar and brown paper (BRG models?)
:P
User avatar
F1 LOTUS
God
 
Posts: 2199
Joined: Thu 17.04.2003, 18:17
Location: SoCal, USA

Re: Bumpers

Postby TommyK » Tue 11.07.2006, 06:33

Paul.P wrote:Ok folks, so whats the bumpers made of, i think its not fibreglass, but don't know what it is made of.
My bodyshop needs to know, to do repairs.


Repairs?!? Do tell...
YAY!!! I'm an enthusiast!!!
TommyK
Enthusiast
 
Posts: 167
Joined: Fri 01.10.2004, 22:38
Location: Benicia, CA

Postby Paul.P » Tue 11.07.2006, 07:26

Tommy, some Mondeo rep driver hit me up the arse last wednesday on the way to East midland lotus meet. I pulled up at a junction to let car past, & he thought better of stopping !. Although its nothing major, he hit me on left hand side of bumper, bumper has got to be completely stripped & repainted, & its took a very small piece out of the wheel arch section & done some crazing in section above centre line. Its more annoying than anything, as you wanna drive in the summer, not have car stuck in repair shop !
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
Paul.P
God
 
Posts: 4970
Joined: Sun 14.12.2003, 18:18
Location: Oakham, Rutland

Postby Gazza » Tue 11.07.2006, 09:37

Paul

Glad to hear it is only minor damage, but have you lifted the boot carpet to see if the boot floor is o.k?

My first Elan was written off because of this :evil:

Gary
S2 Midnight Blue #660
Hayward & Scott 2.5" exhaust.
Red AP brakes & Nitron adjustable suspension.
SOLD

TVR Tamora in Montreal Blue
User avatar
Gazza
God
 
Posts: 1703
Joined: Sun 15.05.2005, 08:55
Location: Romford, Essex.

Bumpers

Postby johnbenk » Tue 11.07.2006, 15:08

Hi

They are from a PRIM material Reinforced Reactive Injection bonded to a stiffening and shock absorbing composite armature.

Painting should be with the Bumpers REMOVED and put ON A STAND.

A "flex Agent" should be added to the paint to help combat stone chips.

If using a HVLP Gun it should be sprayed at "Handspan" width with NO ARM ARC at the end of the GUN PASS.

You Body shop will understand what the above means. If the painter follows the curve of the bumper with the Gun he will leave an even depost of paint just where stone chips seem to "HIT"

With an "arm arc" the paint misses these areas and is not as even in thickness. The" flex agent is added with the paint and thinners. Data sheet comes with the flex agent.

Try to go for "Clear over Base" paint rather than "Waterbourne" paint that the modern body shops are now using.
You do not have the required permissions to view the files attached to this post.
User avatar
johnbenk
The only Gay in the Village
 
Posts: 248
Joined: Wed 21.09.2005, 20:46

Postby Paul.P » Wed 12.07.2006, 21:55

Checked Gary, no visable damage, it was only a very light knock, mind you the paint on the bumper has crazed significantly.
Insurance quote is £1157 !
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
Paul.P
God
 
Posts: 4970
Joined: Sun 14.12.2003, 18:18
Location: Oakham, Rutland


Return to Hood/Top, Bodywork and Fittings

Who is online

Users browsing this forum: No registered users and 3 guests