Porting the wastegate

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Re: Porting the wastegate

Postby fedelemaire » Wed 05.11.2008, 23:26

Hi guys,

After installing my new 2"1/4 Piper Exhaust (see Group buys section), I have the boost creep problem. Thus I planned to port the wastegate! My problem is that English is not my mother tong, and I must recognize the I have troubles understanding the "Porting the wastegate" description in the Wikilec.

I've just read all this topic, but still don't know exactly what I have to take out before doing the job. Do I have to take the turbo off? Pre-cat manifold? what else?

I just don't see the pics or "manual" you talked about in the beginning of the topic. By any chance, does anyone have good pics? Or a "to do list" for this job?

Thanks in advance for your help

Fred
fedelemaire
Newbie
 
Posts: 31
Joined: Wed 10.09.2008, 18:59
Location: Paris, France

Re: Porting the wastegate

Postby rip » Thu 06.11.2008, 00:41

Yes, the turbo has to come off.
I believe it is a right **** to get off too but have not done it yet.
How do you like the Piper 'zaust?
1990 SE
User avatar
rip
God
 
Posts: 5905
Joined: Sun 08.04.2007, 07:48
Location: Milton Keynes, UK

Re: Porting the wastegate

Postby fedelemaire » Thu 06.11.2008, 20:27

It's really good! The tail pipe looks very nice, and just fits the "hole" very well. The sound is right, not too loud, just what you need on a sports car! I'm just a bit anxious about boost creep... That's why I need help to port my wastegate.

Fred
fedelemaire
Newbie
 
Posts: 31
Joined: Wed 10.09.2008, 18:59
Location: Paris, France

Re: Porting the wastegate

Postby GeoffSmith » Thu 06.11.2008, 20:38

Fred, I've got a set of photographs from when I ported my wastegate. I will get around to putting them on the Wiki one day but in the meantime, let me know your e-mail address and I'll send them to you.
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Re: Porting the wastegate

Postby fedelemaire » Fri 07.11.2008, 23:12

Hi Geoff

Thanks a lot. My email address is fedelemaire AT yahoo.fr (no space + @)

Fred
fedelemaire
Newbie
 
Posts: 31
Joined: Wed 10.09.2008, 18:59
Location: Paris, France

Re: Porting the wastegate

Postby GeoffSmith » Sat 08.11.2008, 00:56

Fred,

Pictures sent.

Geoff
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Re: Porting the wastegate

Postby Enright » Sat 08.11.2008, 10:34

Geoff,

I can't even remember what my wastegate porting article/email looked like, but could you upload it to the wiki if there's nothing else on there?
Striking fear into the hearts of duplicate posts everywhere...! :P

BCingU,
Neil ;-)
User avatar
Enright
Modificator
 
Posts: 4860
Joined: Sun 19.12.2004, 19:21
Location: Arnold, Nottingham, England

Re: Porting the wastegate

Postby Elanlover » Tue 25.11.2008, 21:12

GeoffSmith wrote:Fred,

Pictures sent.

Geoff



Geoff, would you mind forwarding those pics tro me as well please? Thanks!
I do whatever my Rice Crispies tell me to do
User avatar
Elanlover
Moderator
 
Posts: 3513
Joined: Fri 05.08.2005, 19:11
Location: The Great White North

Re: Porting the wastegate

Postby ektrolleyboy » Tue 25.11.2008, 21:25

I sent an E-mail to Paul Matty asking them if they'd port my waste-gate and asking how much it would cost and how long it would take?
I got a reply talking about boost kits etc. I think they got the wrong end of the stick because they quoted me a days work at a cost of 1000 GBP... :shock:

Can anyone recommend someone in the Birmingham/Midlands area to carry out this job for me?
And how much is such a job likely to cost?
Pacific Blue-LOTUS ELAN S2 # 036 / Hot Orange-MINI COOPER S CABRIOLET
ektrolleyboy
God
 
Posts: 774
Joined: Sat 11.11.2006, 11:35
Location: Heaven And Hell!

Re: Porting the wastegate

Postby rip » Wed 26.11.2008, 01:25

ektrolleyboy wrote:I sent an E-mail to Paul Matty asking them if they'd port my waste-gate and asking how much it would cost and how long it would take?
I got a reply talking about boost kits etc. I think they got the wrong end of the stick because they quoted me a days work at a cost of 1000 GBP... :shock:

Can anyone recommend someone in the Birmingham/Midlands area to carry out this job for me?
And how much is such a job likely to cost?


Be sure you need it first.
You may not need it at all if you have a cat in the exhaust.
Creep may cause overboost if you have a heavy, insensitive right foot but, if you can control it, you may like it. I do.

Porting is expensive though. Getting to the bleeder is a real pain in the ****.
1990 SE
User avatar
rip
God
 
Posts: 5905
Joined: Sun 08.04.2007, 07:48
Location: Milton Keynes, UK

Re: Porting the wastegate

Postby Cesare » Sun 22.02.2009, 22:31

Hi Geoff

Having the same problem, I would be glad if you could send me info on villeray AT gmail DOTcom

Bests

Cesar
User avatar
Cesare
Tinkerer
 
Posts: 95
Joined: Sat 05.04.2008, 16:45
Location: Normandy

Re: Porting the wastegate

Postby RichardK » Mon 23.02.2009, 08:49

Geoff,

I'm psyching myself up for the turbo off project :? - please could you send me a copy of your photos ( you have my email address from the heater valve group buy)

Many thanks

Richard
CAPETOWN - RED 92 SE: V5 and LGM Turbo Installed
NEW ORLEANS - YELLOW 91 FED. Stock.
User avatar
RichardK
Fanatic
 
Posts: 375
Joined: Sat 07.07.2007, 12:25
Location: New Orleans & Capetown

Re: Porting the wastegate

Postby youre-nicked » Fri 03.04.2009, 11:40

Geoff,
Could you please send me the photos, my car has been in the garage 3 days now and everything is fine on her, It would appear that im an official member of the overboost club ( which I found out on a 70mph overtake on a country lane!)

my e mail is : edd_the_fed [AT] hotmail.com

Ta
User avatar
youre-nicked
Newbie
 
Posts: 18
Joined: Sat 14.03.2009, 21:15
Location: Hartlepool, Cleveland,Up North.

Re: Porting the wastegate

Postby muley » Fri 03.04.2009, 14:01

Just to add my thanks to Geoff for the pics. It was a doddle. The only thing that went wrong was the grinding stone snapping off just before the end. No harm done

I'll be doing my next one after Easter ..

Jim
LEC Turbo Nutter
1991 Aqua Blue Elan / 1992 Black Elan / 2010 Mazda 2 Tamura / 2013 Ford Fiesta (NZ(
muley
Moderator
 
Posts: 4536
Joined: Tue 22.04.2003, 09:07
Location: Wokingham, Berks and Waikanae Beach

Re: Porting the wastegate

Postby GeoffSmith » Fri 03.04.2009, 18:16

Copy on its way to Seaton Canoe. :D
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Re: Porting the wastegate

Postby youre-nicked » Sat 04.04.2009, 08:43

Geoff,
Thanks for the photos, thats now on my to do list.

My mechanic (who also owns an se) noticed that my non standard exhaust didnt have a kink in it like his (sorry thats as technical as I can get) so he took my mid section out,heated it up and squashed it to the same diameter as his.

This has reduced the turbo boost from 0.9 bar to just under 0.8 and it doesnt get there anywhere near as fast as it used to so I can take my foot off or change up before loosing my teeth on the wheel! something about backpressure etc.....

Although a temp fix its doing ok till the exhaust rots and I get a stainless one and do the porting at about the same time. :D
User avatar
youre-nicked
Newbie
 
Posts: 18
Joined: Sat 14.03.2009, 21:15
Location: Hartlepool, Cleveland,Up North.

Re: Porting the wastegate

Postby GeoffSmith » Sat 04.04.2009, 09:49

youre-nicked wrote:My mechanic (who also owns an se)

Is that Gary Smurthwaite?
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Re: Porting the wastegate

Postby youre-nicked » Sat 04.04.2009, 17:01

It is Gary, hes spent a lot of time tinkering with it and she running a lot better, hes also got the elan scan (and knows how to work it, which would baffle me!) and its handy to have someone local who understands the car and loves them.

Ill be taking mine back to him for its services etc, hes a top bloke.
User avatar
youre-nicked
Newbie
 
Posts: 18
Joined: Sat 14.03.2009, 21:15
Location: Hartlepool, Cleveland,Up North.

Re: Porting the wastegate

Postby Sy V » Sun 05.04.2009, 06:05

Let's get this right... he's put the squish back into an exhaust?
The Elan community has spent untold time, effort and cost trying to increase free-flow by getting an exhaust without a squished area (albeit at the cost of having to port the wastegate) and your bloke has reintroduced the squish.
Get him to port the wastegate and straighten the exhaust out again.
Image

Talk and song from tongues of lilting grace, sounds caress my ears but not a word I heard could I relay, the story was quite clear - Robert Plant

In Respectful Memory - 21st March 1959 - 14th February 2016
User avatar
Sy V
LEC Godfather
 
Posts: 5794
Joined: Mon 21.04.2003, 07:06
Location: Lydiate Ash, Bromsgrove, Worcestershire.

Re: Porting the wastegate

Postby youre-nicked » Sun 05.04.2009, 09:22

You got it, at this point in time my elan isnt a weekend toy but has to get me to and from work and as such it needs to be used, I cant have it sat around in bits getting things done.

Like I said this is a temp fix till the exhaust on it dies and then once a stainless is put on I will have to go along the porting route. Im not going to buy an exhaust that at the moment isnt required and is out of my reach due to the cost of buying the car.

It will be a work in progress that could take some time to complete, I didnt enjoy a car that cuts out at the first sign of me putting my foot down.
User avatar
youre-nicked
Newbie
 
Posts: 18
Joined: Sat 14.03.2009, 21:15
Location: Hartlepool, Cleveland,Up North.

PreviousNext

Return to Turbos, Boost, and Intakes

Who is online

Users browsing this forum: No registered users and 2 guests