Hello
My windows didn't go up and down.
I've followed the wonderful Youtube video, cleaned out the old greasy gunk form the runners, replaced a few broken parts, put it all back together and I'm struggling with the 3 runners.
Can I get the glass to run smoothly up and down? Not a chance.
I'm manually helping the glass up and down in the hope that the slightly loosened runner bolts / nuts will find their sweet spot(s), tightening the top ones with the glass at the top, lowering the glass and tightening the lower bolts....and it still sticks. Mostly at the opening (back) end of the door. The rear glass runner seems to want to twist.
I can't afford another full swear jar.
Has anyone else experienced and overcome this?
Other than trial and error, are there any tips?
I actually had the driver's side window working pretty well, but when I was putting the glass back in the door, the old, outer glass drop seal split in 3 or 4 places.
It was very brittle.
So, I've had the glass out again, fitted a new outer glass drop seal and I'm back at the same problem point.
I stumbled across a combination of loosened / tightened runner bolts last time.
No luck this time
Passenger side is next!
