Regulator, again !

Moderators: theelanman, dapinky, nitroman, Specky, clemo, Nige, Dave Eds, Sy V, GeoffSmith, DaveT, Elanlover, muley, Enright, algirdas

Regulator, again !

Postby Neil D. » Tue 19.05.2015, 20:25

Been away for some time, but a damaged window regulator needed attention, and the best source of information remains here.

The problem is somewhat different from the usual. The "transfer ring" made of rubber that sits between the gear wheel and the bottom of the casing has been chewed up. This caused the cover plate to bend, and the cable to get mangled.....

being in France, Peugeot parts are easy to source. But has anybody contacted the regulator manufacturer ?

http://www.lamesgroup.com/eng/prod_gear_motor.htm

Also on the S2 ( at least lhd ) the regulator is also held in place by a plastic part that is riveted behind the regulator ( 3 rivets )
Cable appears to be 1.92 mm, 2.00 m should fit ?

Any info and help appreciated

Thanks

Neil
User avatar
Neil D.
Fanatic
 
Posts: 388
Joined: Tue 24.06.2003, 10:26
Location: France

Re: Regulator, again !

Postby Neil D. » Thu 21.05.2015, 13:28

Reply from Lames SPA

"I regret to inform you that the particular requested is out of production
for many years and we haven't in our warehouse.

You might ask the following company that produce spare parts:"

http://www.miraglio.it/

catalogue here...
http://www.miraglio.it/pdf/MIRAGLIO_ALZACRISTALLI.pdf

PEUGEOT 405 / 406 remains the closest

Neil
User avatar
Neil D.
Fanatic
 
Posts: 388
Joined: Tue 24.06.2003, 10:26
Location: France


Return to Doors and Windows

Who is online

Users browsing this forum: Steve A and 2 guests