Piper Exhausts turbo downpipe development thread

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Re: Piper Exhausts turbo downpipe development thread

Postby paulsmithmk » Mon 04.03.2013, 22:56

Steve A wrote:
a new set of hoses (in orange ) waiting for her return...
:smt078 you've been spending too much time with Rip's :lol:

So I guess I have a successful installation


:smt023 That's good we now have two positive results so far one SE and one S2

Can't wait to finish my shift :burnout:


ha ha maybe - as you will see when re-trim all done!!!
S2 Number 640
User avatar
paulsmithmk
Fanatic
 
Posts: 332
Joined: Wed 04.07.2012, 11:51
Location: Milton Keynes

Re: Piper Exhausts turbo downpipe development thread

Postby ccb056 » Mon 04.03.2013, 23:32

surfboardfiller wrote:
ccb056 wrote:I don't think the pipe is working too well. Because the waste gate flow isn't separated from the turbine flow, we are getting a lot of high pressure turbulent air directly downstream from the wategate port. This is causing less air to flow through the waste gate (something porting the waste gate can't fix).

To make the piper downpipe work well it would need to be modified with a baffle to keep the waste gate and turbine flow separate for some distance, much like the OEM and Knox downpipes have.


What has that got to do with boost creep?


This has a lot to do with the boost creep.
If the turbulent airflow from the turbine is causing a high pressure area directly downstream of the wastegate then less flow through the wastegate will occur.
Going back to your fluid dynamics course you'll remember that differential pressure causes fluid flow, much like potential difference causes electrical current.

Boostcreep occurs because we have too much flow through the turbine (something the wastegate is supposed to fix).
You can see how having a smaller wastegate reduces the flow, creating boostcreep; much like having high pressure downstream reduces the differential pressure, reducing flow, creating boostcreep.
1991 Lotus Elan Fed, Monaco White
Mobil 1 5w50, PureONE PSL14459, Redline MT-90
Piper 2.5 Resonator PCE; 21mm wastegate; Everest
Quaife ATB LSD, BCN Cables and Short Shift, Bridgestone Potenza RE-71R
ccb056
Enthusiast
 
Posts: 232
Joined: Mon 13.10.2003, 22:27
Location: Michigan, USA

Re: Piper Exhausts turbo downpipe development thread

Postby paulsmithmk » Mon 04.03.2013, 23:35

all this science making my head hurt!! - mine just goes faster than it did and no longer cuts out so I'm happy!
S2 Number 640
User avatar
paulsmithmk
Fanatic
 
Posts: 332
Joined: Wed 04.07.2012, 11:51
Location: Milton Keynes

Re: Piper Exhausts turbo downpipe development thread

Postby rip » Tue 05.03.2013, 00:08

Steve A wrote:
a new set of hoses (in orange ) waiting for her return...
:smt078 you've been spending too much time with Rip's :lol:

I wish.
I've not been spending enough time with my own Elan lately. It's not moved for 3½ weeks & bloody thing needs a jump start. If I leave it much longer it will think I'm Dico. :(

An Elanscan run with Paul's & mine under controlled conditions is definitely something I want to do & will provide a proper comparison between our 2 differently modified Elans.
1990 SE
User avatar
rip
God
 
Posts: 5905
Joined: Sun 08.04.2007, 07:48
Location: Milton Keynes, UK

Re: Piper Exhausts turbo downpipe development thread

Postby Steve A » Tue 05.03.2013, 00:40

I happen to love orange!


Your bias so that doesn't count :lol:

must keep your foot hard to the floor and let the revs build to maximum


That's not easily done I only got to 5k, need a bigger and longer road with no traffic.
Also did several hard acceleration sprints, no boost creep 8)

An Elanscan run with Paul's & mine under controlled conditions is definitely something I want to do & will provide a proper comparison between our 2 differently modified Elans.


It would be good to have some hard facts everyone could look at and agree on :smt062
"If everything is under control, you are going too slow."
User avatar
Steve A
God
 
Posts: 2663
Joined: Tue 18.09.2007, 12:44
Location: South East Essex

Re: Piper Exhausts turbo downpipe development thread

Postby rip » Tue 05.03.2013, 13:26

Steve A wrote:
I happen to love orange!


Your bias so that doesn't count :lol:

I also think half orange seats will work very well in an Azure blue Elan.
I guess my opinion doesn't count either because I'm completely bonkers for getting a purple interior. :-D

Steve A wrote:
rip wrote:An Elanscan run with Paul's & mine under controlled conditions is definitely something I want to do & will provide a proper comparison between our 2 differently modified Elans.


It would be good to have some hard facts everyone could look at and agree on :smt062

Exactly.
1990 SE
User avatar
rip
God
 
Posts: 5905
Joined: Sun 08.04.2007, 07:48
Location: Milton Keynes, UK

Re: Piper Exhausts turbo downpipe development thread

Postby cliff » Tue 05.03.2013, 15:00

rip wrote:
An Elanscan run with Paul's & mine under controlled conditions is definitely something I want to do & will provide a proper comparison between our 2 differently modified Elans.


That's a great idea, we can add mine in as well, will have to wait until after the respray is done though. :D

I don't know what it is about this thread that has polarized opinions so much, I for one am very happy with the way my car is running. Instead of a lot of technical data, assumptions and accusations being thrown about, can we all calm down until we have some hard facts.

Maybe HJ could compare the flows between the original lump and the Piper downpipe as he seems to have access to that type of equipment. Steve could provide some flow info for the Knox downpipe and an Elanscan run. Combined with Rip's info, this should give us some solid data to work with.

I want to get my car on a rolling road with a good tuner, anyone have any suggestions?

At the end of the day, a replacement for the cast lump is a good thing whether it gives 2 or 10 hp more. Solving any overboost issues may take some time but by working together we can come up with a solution.
91 Lotus Elan SE Turbo
03 MG TF 135 Sprint (Partner's)
07 Alfa Spider 939

If you can't be a good example, then you might as well be a terrible warning
User avatar
cliff
God
 
Posts: 801
Joined: Mon 17.01.2011, 18:39
Location: Preveza Greece / Scunthorpe UK

Re: Piper Exhausts turbo downpipe development thread

Postby paulsmithmk » Tue 05.03.2013, 20:04

Thanks for your support for the Orange - I have no idea why but is is my colour - I considered buying an Orange Esprit on AutoTrader last week it's that bad!! I am also looking for a quote for 2 tone Blue/Orange respray....

As soon as I can I let's do the test - maybe on run down to softtop Sunday at Goodwood which is in May this year??

P
S2 Number 640
User avatar
paulsmithmk
Fanatic
 
Posts: 332
Joined: Wed 04.07.2012, 11:51
Location: Milton Keynes

Re: Piper Exhausts turbo downpipe development thread

Postby HJ2 » Tue 05.03.2013, 21:09

A burnt orange Esprit... That would be a wet dream :lol:

Meanwhile on the Piper front:


I just have removed the downpipe again. Since there is much more room to work with with the piper downpipe, this is an easy job, 30 minutes.
I removed the heat-shield, and the O2 sensor as well. In-between I even fixed a small coolant leak!

Now I have in front of me the original and the Piper downpipe. Although I have some experience in flow dynamics true my former job testing rocket engines (really!) I will discuss this matter with my new colleagues (since the beginning this year!) in the Hi-speed wind-tunnel lab of the technical university of Delft, Aerospace faculty. I will inform you of any progress to come!

I must say that I am really disappointed that Piper does not mingle in the discussion! I had a lot of communication concerning the lack off finishing of the inside. Perhaps this is also the reason why my configuration is more prone to boost creep than others here. Mine is flush and clean from the inside!
I also contacted piper about the flow concerns with the internal wastegate and stuff, but I do not have the feeling that they are very interested in delivering a good product. Strange, because the exhaust is just that! A good product and good value for money.

Piper, if you are reading this, please feel free to contact me and we can discuss solutions for the benefit of your production line and the LEC community in a private setting.



Cheers all!
Henk-Jan
If you always do what you always did, you always get what you always got
User avatar
HJ2
Wodan - God of the Low Lands
 
Posts: 4405
Joined: Fri 06.06.2008, 10:54
Location: Delft, the Netherlands

Re: Piper Exhausts turbo downpipe development thread

Postby Steve A » Tue 05.03.2013, 21:33

I will discuss this matter with my new colleagues (since the beginning this year!) in the Hi-speed wind-tunnel lab of the technical university of Delft, Aerospace faculty.


So this really IS rocket science :lol:
"If everything is under control, you are going too slow."
User avatar
Steve A
God
 
Posts: 2663
Joined: Tue 18.09.2007, 12:44
Location: South East Essex

Re: Piper Exhausts turbo downpipe development thread

Postby HJ2 » Tue 05.03.2013, 21:39

Noohoooooo.. I told you!
Rocket science was my former job, now it's just plane aircraft engineering, which is a bit like bike repair :-D
If you always do what you always did, you always get what you always got
User avatar
HJ2
Wodan - God of the Low Lands
 
Posts: 4405
Joined: Fri 06.06.2008, 10:54
Location: Delft, the Netherlands

Re: Piper Exhausts turbo downpipe development thread

Postby rip » Tue 05.03.2013, 22:19

Steve A wrote:So this really IS rocket science :lol:

Air flow & turbulence is a highly complex subject. Even in F1 a lot of it is trial & error.
1990 SE
User avatar
rip
God
 
Posts: 5905
Joined: Sun 08.04.2007, 07:48
Location: Milton Keynes, UK

Re: Piper Exhausts turbo downpipe development thread

Postby HJ2 » Tue 05.03.2013, 22:27

:agree:
If you always do what you always did, you always get what you always got
User avatar
HJ2
Wodan - God of the Low Lands
 
Posts: 4405
Joined: Fri 06.06.2008, 10:54
Location: Delft, the Netherlands

Re: Piper Exhausts turbo downpipe development thread

Postby GeoffSmith » Tue 05.03.2013, 22:31

HJ2 wrote:Noohoooooo.. I told you!
Rocket science was my former job, now it's just plane aircraft engineering, which is a bit like bike repair :-D

When you've designed bits for stuff that exceeds Mach 3 in the earth's atmosphere, you can call yourself a rocket scientist and not before. :twisted: And I did warn you 2 years ago.
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Re: Piper Exhausts turbo downpipe development thread

Postby ccb056 » Tue 05.03.2013, 22:47

This is the best picture I have seen so far of how the OEM downpipe separates the 2 flows.
If anyone else can get better pics of the OEM showing just how far deep that baffle goes, then from a design standpoint we can start modifying the Piper downpipe to at least be equivalent.
You do not have the required permissions to view the files attached to this post.
1991 Lotus Elan Fed, Monaco White
Mobil 1 5w50, PureONE PSL14459, Redline MT-90
Piper 2.5 Resonator PCE; 21mm wastegate; Everest
Quaife ATB LSD, BCN Cables and Short Shift, Bridgestone Potenza RE-71R
ccb056
Enthusiast
 
Posts: 232
Joined: Mon 13.10.2003, 22:27
Location: Michigan, USA

Re: Piper Exhausts turbo downpipe development thread

Postby GeoffSmith » Tue 05.03.2013, 22:55

Not a lot better, but it does show the carefully sculpted wastegate exit which helps keep the two flows separate.

WastegateManifold.jpg
You do not have the required permissions to view the files attached to this post.
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Re: Piper Exhausts turbo downpipe development thread

Postby cliff » Tue 05.03.2013, 23:24

ccb056 wrote:This is the best picture I have seen so far of how the OEM downpipe separates the 2 flows.
If anyone else can get better pics of the OEM showing just how far deep that baffle goes, then from a design standpoint we can start modifying the Piper downpipe to at least be equivalent.


What is the obsession with keeping things equivalent? Different approaches can give similar results.

Examples.

Standard hand dryer. Dyson air blade (if you don't have this in the US then google it)

Concorde, Harrier, Boeing 747

Apple, Microsoft.

Do you have a Piper downpipe? Being US based I doubt it. So how do you feel qualified to comment on something you have never seen or driven a car fitted with it?

I have this on my car and am very happy with it so please stop complaining about this product based on nothing but your personal preferences and theories.

If you read my last post, I have suggested several ways of collecting data, how about we do that?
Last edited by cliff on Tue 05.03.2013, 23:34, edited 1 time in total.
91 Lotus Elan SE Turbo
03 MG TF 135 Sprint (Partner's)
07 Alfa Spider 939

If you can't be a good example, then you might as well be a terrible warning
User avatar
cliff
God
 
Posts: 801
Joined: Mon 17.01.2011, 18:39
Location: Preveza Greece / Scunthorpe UK

Re: Piper Exhausts turbo downpipe development thread

Postby cliff » Tue 05.03.2013, 23:32

HJ2 wrote:Noohoooooo.. I told you!
Rocket science was my former job, now it's just plane aircraft engineering, which is a bit like bike repair :-D


Not really, but what do I know, I just fix them! 8)
91 Lotus Elan SE Turbo
03 MG TF 135 Sprint (Partner's)
07 Alfa Spider 939

If you can't be a good example, then you might as well be a terrible warning
User avatar
cliff
God
 
Posts: 801
Joined: Mon 17.01.2011, 18:39
Location: Preveza Greece / Scunthorpe UK

Re: Piper Exhausts turbo downpipe development thread

Postby paulsmithmk » Wed 06.03.2013, 20:01

cliff wrote:
I have this on my car and am very happy with it so please stop complaining about this product based on nothing but your personal preferences and theories.

If you read my last post, I have suggested several ways of collecting data, how about we do that?


:agree:
S2 Number 640
User avatar
paulsmithmk
Fanatic
 
Posts: 332
Joined: Wed 04.07.2012, 11:51
Location: Milton Keynes

Re: Piper Exhausts turbo downpipe development thread

Postby whippit » Thu 07.03.2013, 00:03

I have a full piper exhaust + precat , i had every intention to buy the down pipe, i would love to have a full system,
but after seeing the quality of finishing on HJ2 i decided not to

i have no knowledge of fluid dynamics or wish to,
i cannot understand why piper has not commented on the issues that have been brought up on the quality control , (rough arse internal finish , lack of brackets for heat shields

never mind the other issues

it looks to me like this product has had little thought apart from making sure it fits, i'm sorry this is my personal preference and theory. :wink:
whippit
Fanatic
 
Posts: 289
Joined: Mon 09.04.2007, 00:34
Location: southport

PreviousNext

Return to Exhaust

Who is online

Users browsing this forum: No registered users and 3 guests