Lotus Elan Central

by **David** » Mon 20.11.2006, 14:29

Hi all,

due to the large price rises in the cost of stainless steel, almost doubled in the last 12 months, we can no longer hold the price of £250.00 for an Elan exhaust system.

As from 01/12/2006 the selling price will be £325.00. However it will still be available to LEC members for £295.00.
Any LEC members ordering before the end of November can still buy at £250.00.

Regards,

Dave Jones
Head of R & D
Peco
Sandford Street
Birkenhead
Wirral
CH41 1AZ

by **Monty** » Mon 20.11.2006, 16:58

Get u`r orders in folks lol.

Thanks Dave for keep a discount for the LEC`ers.

Still haven`t had the chance to come up and see u to get the rear box straight :roll:

Noticed some vids on YouTube with Esprits doing the rolling road at u`r place. :-D

by **paulwatkins** » Wed 29.11.2006, 08:58

Just a reminder that the special discount is ending in a few days. See David's post above.

I ordered mine yesterday - deal is too good to miss. Thanks to stevieshag for advising me to get it!

by **GeoffSmith** » Fri 01.12.2006, 00:33

As the group coordinator, could I just thank Dave and Peco, for keeping what was meant to be a one-off group purchase open for six months. Unfortunately, the £250 offer has now lapsed, but many of us have benefited from a very competitively priced system and even £295 is not unreasonable.

Geoff

by **texas2201** » Mon 08.01.2007, 14:35

What is the experience of those who have fitted the Peco system and what warranty do they offer?

Exhaust just fell apart last night :-(

Martin

been quoted £400 by a local company Longlife - I have used them for two exhausts for two very different cars in the past and both still performing excellently

by **ailwyn** » Mon 08.01.2007, 15:02

A1, makes it sound like a nice sportscar without being boy racer-like, plus 10 - 23 bhp increase reported (10 for my S2, 23 for Peco Dave's SE).

I believe it's a lifetime warranty.

At £300 + delivery or (free fitting at Peco) you will be happy!

Ailwyn

by **texas2201** » Mon 08.01.2007, 15:15

Thanks Ailwyn

Exhaust is in two bits so the three and a half hour drive to Liverpool is out of the question

Do you know if they have any fitters in the South - I am in Berkshire?

Also is the warranty return to Liverpool?

Martin

by **ailwyn** » Mon 08.01.2007, 15:34

Peco will not pass on the exhausts to their fitters because of the large discount, but several people have taken it to Kwik Fit or any local exhaust fitters. I think the general consensus was a £20 back hander will get it fitted.

I guess the warranty would be return to Liverpool, but Peco Dave (Dave Jones) will be able to give you more detail, best bet his to contact him through the main Peco switchboard, he's a really nice guy so you shouldn't have any problems.

Ailwyn

by **bunglin** » Tue 26.06.2007, 18:46

David wrote:Also like to say that this system does fit an S2 and it will still pass the MOT emission test providing your pre-cat is in working order.

Dave Jones
Head of R & D
PECO

Is there any way to pre-test for this. I am in the market for a new exhaust as my existing one is blowing - but i'd hate to have it done and then fail its next MOT.

Are there any exhaust upgrade options that keep the main cat if removing it isnt an option?

by **GeoffSmith** » Tue 26.06.2007, 18:54

My S2 sailed through the MoT with a Peco.

by **ab2cv** » Tue 26.06.2007, 19:10

The PECO was also the least of my worries for my MOT two weeks ago.

Alan

by **bunglin** » Tue 26.06.2007, 19:14

Sounds like its unlikely to be a problem. My S2 got through its MOT a few weeks back - with just an advisory about the leaky exhaust.

Is this exhaust easy to fit? My car is up for a service soon and I usually take it to Paul Matty - I was thinking of getting it all done at the same time, but if its just a kwik fit jobby - then I may take the plunge immediately.

by **clemo** » Fri 29.06.2007, 12:19

Just purchased my peco. (not for the N/A) But will compare ..
spoken to dave , most helpfull..
price is £295 + postage of £14.00.

this i would say is still a very good price..
i could not find anything close from hangar111 or southwest lotus.

clemo

by **Enright** » Fri 29.06.2007, 13:02

clemo wrote:this i would say is still a very good price..

I agree. Top quality, bottom price. You couldn't post a single one of the sections for £14 if you wanted to (even when the posties ARE working)! :lol:

by **clemo** » Wed 04.07.2007, 07:13

its here..
or should i say " its peco time"

quick delivery.
looks great..

any words of wisdom for a self fit?

cheers
clemo

by **AndyH** » Wed 04.07.2007, 09:28

Self fitting is easy! drive self to local kwik fit, offer the saturday boy 25 quid to fit the thing, go round corner to pub for half a shandy while you wait, come back in 30 mins and hey presto - loud shiny tailpipe fitted satis!

...well that's what I did anyway

by **algirdas** » Thu 16.08.2007, 06:16

Dear All:

At long last, I have fitted my Peco exhaust. Congrats to Dave for a quality piece of equipment. I installed it myself. All went together very easily. Took about 2 hours taking into account some installation/removal/test fitting of the muffler to see if there was a way to fit the clamp tp prevent chaffing and rubbing on the trunk/boot bottom.

Even though I have not yet had the car out on the road, I did fire it up on stands to see if any of the Samco hoses I installed were leaking. My initial take on it is that the Peco exhaust system is really, really QUIET! I was simply amazed. From reading the posts in this thread, I was expecting a really loud exhaust. Not this exhaust. Big time QUIET.

Variations on a theme-Instead of using the clamps that came with the kit, I used marine grade stainless steel T-bolt clamps. I removed the nyloc nut and used a nut with a lock washer and then dead nutted it with a top lock nut. I considered using constant torque clamps but I decided that would be overkill. By the way, I am less than impressed with top lock nuts.

I placed the clamps right by the edge of the female pipe at each joint. The nice thing about the T-bolt clamps is that they exert pressure more equally around the pipe than traditional muffler clamps. Makes for easier disassembly later, if needed.

Sincerely,

Algirdas

by **Rambo** » Thu 16.08.2007, 11:48

algirdas wrote:Even though I have not yet had the car out on the road, I did fire it up on stands to see if any of the Samco hoses I installed were leaking. My initial take on it is that the Peco exhaust system is really, really QUIET! I was simply amazed. From reading the posts in this thread, I was expecting a really loud exhaust. Not this exhaust. Big time QUIET.

It is reasonably quiet at rest - just a nice burbly resonance. However, take it out and floor it :burnout:

and you will soon change your mind. I'm pretty sure you won't be saying QUIET after that Algirdas. If so, I'll eat Monty's boxer shorts.

by **algirdas** » Thu 16.08.2007, 12:59

Dear Mr. Rambo:

We'll know Sunday, I guess, when I take my girlfriend home to Denver. But don't you consider devouring Mr. Monty's boxer shorts a bit extreme? Will they at least be recently laundered?

Sincerely,

Algirdas

by **Monty** » Thu 16.08.2007, 13:48

Rambo wrote:If so, I'll eat Monty's boxer shorts.

ermmmmmm i don`t where boxers mate :roll:

and u`r not eating anything else :shock:

Scott did warn me about u LMAO :lol:

Dear Mr Algirdas
Just wondering it`s quite cause u still have the pre-cat

Mine was extremely load and had to have a 2nd silencer fitted :roll:

it`s still load but just right for me and i pass the sound test on trackdays :-D

Lotus Elan Central

New Large Bore Exhaust by PECO for S1 Elans with no flat bit

New Large Bore Exhaust

Re: New Large Bore Exhaust

New Large Bore Exhaust

Re: New Large Bore Exhaust

Who is online