Front spoiler rubber lip

Post cries for help here if your topic fits no other thread in this category.

Moderators: theelanman, dapinky, Specky, Dave Eds, DaveT, Elanlover, Nige, muley, Enright, Sy V, algirdas, nitroman, clemo, GeoffSmith

Re: Front spoiler rubber lip

Postby Simon_P » Tue 07.04.2020, 13:48

OK - I've re established contact with the self-isolating one and we are good to go.

The offer is:
a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1.
2.
3.
4.
5.
6.
7.

b.Rubber lip with holes
1.
2.
3.
4.
5.
6.
7.
Simon_P
God
 
Posts: 1560
Joined: Fri 06.08.2004, 12:33
Location: Kent UK

Re: Front spoiler rubber lip

Postby V8vroom » Wed 08.04.2020, 13:52

Yep I need a new one as well and would happily join group buy

stay well everyone
Lotus Elan S2 No. 513 Norfolk Mustard
V8vroom
Tinkerer
 
Posts: 93
Joined: Tue 14.04.2015, 21:21
Location: Stamford, Lincs

Re: Front spoiler rubber lip

Postby niall » Wed 08.04.2020, 22:38

The offer is:
a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1.
2.
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2.
3.
4.
5.
6.
7.
niall
Fanatic
 
Posts: 410
Joined: Tue 26.08.2003, 22:16
Location: Ardfern

Re: Front spoiler rubber lip

Postby V8vroom » Thu 09.04.2020, 15:16

niall wrote:The offer is:
a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1.
2.
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2. Rupert (with fasteners please)
3.
4.
5.
6.
7.
Lotus Elan S2 No. 513 Norfolk Mustard
V8vroom
Tinkerer
 
Posts: 93
Joined: Tue 14.04.2015, 21:21
Location: Stamford, Lincs

Re: Front spoiler rubber lip

Postby NewLogik » Fri 10.04.2020, 14:58

a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1.
2.
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2. Rupert (with fasteners please)
3. NewLogik (with fasterners)
4.
5.
6.
7.
NewLogik
Enthusiast
 
Posts: 130
Joined: Mon 02.05.2016, 03:04
Location: Repentigny,Quebec, Canada

Re: Front spoiler rubber lip

Postby johnj » Sat 11.04.2020, 10:39

a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1.
2.
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2. Rupert (with fasteners please)
3. NewLogik (with fasterners)
4. johnj (with fasteners please)
5.
6.
7.
johnj
Tinkerer
 
Posts: 57
Joined: Mon 04.01.2010, 23:56
Location: Cumbria

Re: Front spoiler rubber lip

Postby Portugal_lotus » Tue 14.04.2020, 16:17

a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1.
2.
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2. Rupert (with fasteners please)
3. NewLogik (with fasterners)
4. johnj (with fasteners please)
5. Portugal_lotus (with fasteners please)
6.
7.
Portugal_lotus
Newbie
 
Posts: 42
Joined: Sat 17.01.2004, 02:30

Re: Front spoiler rubber lip

Postby Denny » Wed 15.04.2020, 07:21

a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1.
2.
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2. Rupert (with fasteners please)
3. NewLogik (with fasterners)
4. johnj (with fasteners please)
5. Portugal_lotus (with fasteners please)
6. Denny (with fasteners please)
7.
User avatar
Denny
Fanatic
 
Posts: 321
Joined: Tue 24.07.2007, 11:43
Location: Teesside

Re: Front spoiler rubber lip

Postby GeoffSmith » Wed 15.04.2020, 11:25

a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1.
2.
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2. Rupert (with fasteners please)
3. NewLogik (with fasterners)
4. johnj (with fasteners please)
5. Portugal_lotus (with fasteners please)
6. Denny (with fasteners please)
7. Geoff
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. P&P.
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15048
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Re: Front spoiler rubber lip

Postby Simon_P » Fri 24.04.2020, 11:36

Hi All,

I'm waiting for various deliveries which are imminent. Suppliers are all closed or part time and there is a fairly standard week or two delivery at the moment - It gets here when it gets here!
The good news is that for Group Buyers It looks like we can hold Malvern 2013 prices:
£20 without holes
£25 with Holes
£7 for screws and washers.

The indifferent news is that I am still waiting for quotes for the U nuts.

The bad news is that Hermes have just put their prices up and postage is going to be around the £5 mark
Simon_P
God
 
Posts: 1560
Joined: Fri 06.08.2004, 12:33
Location: Kent UK

Re: Front spoiler rubber lip

Postby NewLogik » Tue 28.04.2020, 18:10

Simon_P wrote:Hi All,

I'm waiting for various deliveries which are imminent. Suppliers are all closed or part time and there is a fairly standard week or two delivery at the moment - It gets here when it gets here!
The good news is that for Group Buyers It looks like we can hold Malvern 2013 prices:
£20 without holes
£25 with Holes
£7 for screws and washers.

The indifferent news is that I am still waiting for quotes for the U nuts.

The bad news is that Hermes have just put their prices up and postage is going to be around the £5 mark


Thank you for the update !
NewLogik
Enthusiast
 
Posts: 130
Joined: Mon 02.05.2016, 03:04
Location: Repentigny,Quebec, Canada

Re: Front spoiler rubber lip

Postby Simon_P » Wed 29.04.2020, 09:09

They arrived yesterday - I'll try and get to it today and post later.
Simon_P
God
 
Posts: 1560
Joined: Fri 06.08.2004, 12:33
Location: Kent UK

Re: Front spoiler rubber lip

Postby Tuga2112 » Thu 30.04.2020, 22:10

a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1. Tuga2112
2. Tuga2112
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2. Rupert (with fasteners please)
3. NewLogik (with fasterners)
4. johnj (with fasteners please)
5. Portugal_lotus (with fasteners please)
6. Denny (with fasteners please)
7. Geoff
1991 elan se
1991 elan se project
91 MR2 Turbo (import) project
94 Celica GT4 (Import)
94 4Runner
98 Celica SR

too many projects. not enough sunny days :(
User avatar
Tuga2112
God
 
Posts: 1269
Joined: Fri 12.09.2014, 22:54
Location: Walsall

Re: Front spoiler rubber lip

Postby Fredjohn » Wed 06.05.2020, 18:10

a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1. Tuga2112
2. Tuga2112
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2. Rupert (with fasteners please)
3. NewLogik (with fasterners)
4. johnj (with fasteners please)
5. Portugal_lotus (with fasteners please)
6. Denny (with fasteners please)
7. Geoff
8. Fredjohn

PS Just to confirm, I have 17 holes, some of which are slots??
La vie passe vite: vivez la avec elan(s).

Elan S4 DHC 1969
Elan SE turbo 1992
Evora 2010
MB CLK 320CDi 2007
Boardman Endurance SLR 9.4 disc carbon road bike
Swift Sundance Lifestyle 500
User avatar
Fredjohn
God
 
Posts: 1872
Joined: Tue 21.08.2012, 00:30
Location: Malvern, Worcs

Re: Front spoiler rubber lip

Postby Fredjohn » Wed 06.05.2020, 18:15

V8vroom wrote:Yep I need a new one as well and would happily join group buy

stay well everyone


Copy the latest list, start a new reply, paste in the list then add your name to the relevant list a or b as required.

Stay safe V8vroom.
La vie passe vite: vivez la avec elan(s).

Elan S4 DHC 1969
Elan SE turbo 1992
Evora 2010
MB CLK 320CDi 2007
Boardman Endurance SLR 9.4 disc carbon road bike
Swift Sundance Lifestyle 500
User avatar
Fredjohn
God
 
Posts: 1872
Joined: Tue 21.08.2012, 00:30
Location: Malvern, Worcs

Re: Front spoiler rubber lip

Postby sheriff464 » Mon 11.05.2020, 16:45

Fredjohn wrote:a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1. Tuga2112
2. Tuga2112
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2. Rupert (with fasteners please)
3. NewLogik (with fasterners)
4. johnj (with fasteners please)
5. Portugal_lotus (with fasteners please)
6. Denny (with fasteners please)
7. Geoff
8. Fredjohn
9. Sheriff464.( Just one set of stainless fasteners please, if that would be possible?).
PS Just to confirm, I have 17 holes, some of which are slots??
sheriff464
Tinkerer
 
Posts: 65
Joined: Thu 01.04.2010, 22:13
Location: Shropshire

Re: Front spoiler rubber lip

Postby Joe Roberts » Mon 11.05.2020, 17:27

I'm after the rubber front spoiler lip please as well if its not too late??
Joe Roberts
Newbie
 
Posts: 14
Joined: Sun 19.05.2019, 20:54
Location: Warwickshire England

Re: Front spoiler rubber lip

Postby Simon_P » Mon 11.05.2020, 20:23

No not too late I'm cutting the holes now (inbetween putting a gutter up). Please add your name to the list with the appropriate options.

I'll contact people tomorrow.
Simon_P
God
 
Posts: 1560
Joined: Fri 06.08.2004, 12:33
Location: Kent UK

Re: Front spoiler rubber lip

Postby sheriff464 » Tue 12.05.2020, 07:24

sheriff464 wrote:
Fredjohn wrote:a. Rubber lip (£TBA including a donation to LEC Kitty)
b. Rubber lip with the holes cut in the correct place +£5

Optional stainless screws and the correct size washers £TBA was about £7 ten years ago but the supplier I use is closed so will have to find another supplier
I am also trying to get the correct size nuts or an alternative TBA

Please make a note if you want the fasteners.

a. Rubber lip
1. Tuga2112
2. Tuga2112
3.
4.
5.
6.
7.

b.Rubber lip with holes
1. Niall (with fasteners)
2. Rupert (with fasteners please)
3. NewLogik (with fasterners)
4. johnj (with fasteners please)
5. Portugal_lotus (with fasteners please)
6. Denny (with fasteners please)
7. Geoff
8. Fredjohn
9. Sheriff464.( Just one set of stainless fasteners please, if that would be possible?).
PS Just to confirm, I have 17 holes, some of which are slots??
sheriff464
Tinkerer
 
Posts: 65
Joined: Thu 01.04.2010, 22:13
Location: Shropshire

Re: Front spoiler rubber lip

Postby Simon_P » Mon 01.06.2020, 03:16

Well it has been a busy few weeks - thank you for your patience on this.

I have drawn a blank so far on the nuts, We need no 8 U nuts - The first delivery was No14 J nuts I guess the picker previously worked in a supermarket and though I had clicked "accept Alternates" the second delivery might be ok but it doesn't look like they are wide enough for our panel thickness. I will keep looking, but idf anyone is stuck Bresco do something that might work ( they are a different design but right panel thickness). In any event I will post an alternative/Repair method
Fredjohn wrote:PS Just to confirm, I have 17 holes, some of which are slots??

Yes, 17 holes four of which are slots. Some of the holes on the bumper are slots as well, then it depends where the nut is positioned and given that the rubber is very soft and it is an inexact science it is worth a few minutes to get it to sit right. interestingly the early manual says 15. I've not come across a car with 15 holes and the 3 in the middle at the front suggest that after they scraped it on a few speed bumps they added 2 more screws.

I think I have sent everyone a pm - It's late so if you haven't got a message let me know - If you want a rubber lip add your name to the list!

Remember that this includes a decent donation to the LEC Kitty, which keeps Dapinky well stocked with Teabags and consequently you well supplied with Tea..... when we do actually get to meet-up.
Simon_P
God
 
Posts: 1560
Joined: Fri 06.08.2004, 12:33
Location: Kent UK

PreviousNext

Return to Miscellaneous Problems - Need Help!

Who is online

Users browsing this forum: No registered users and 1 guest

cron