| Home | WikiLEC | Repairs | Upgrades | Gallery | Buy & Sell | Mountain Chips | Meets & Events | Contact |
|
Binnacle cover screws
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
5 posts
• Page 1 of 1
Binnacle cover screws
by elaverick » Thu 11.01.2018, 09:14
Anyone happen to know the diameter of the screws used to hold the binnacle cover down?
-
elaverick - Tinkerer
- Posts: 93
- Joined: Tue 23.06.2009, 15:33
- Location: Bristol, United Kingdom
Re: Binnacle cover screws
by Saltire » Thu 11.01.2018, 09:58
M4 x 20; part no A100W5177F.
SJ Sportscars in Devon stocks them if that helps: 86p each inc VAT!
SJ Sportscars in Devon stocks them if that helps: 86p each inc VAT!
Jonathan
1995 Elan S2, BRG - Now sadly sold
Mrs Saltire’s 2021 Mini Countryman Cooper S
Mrs Saltire’s 2022 BMW i3S
1995 Elan S2, BRG - Now sadly sold
Mrs Saltire’s 2021 Mini Countryman Cooper S
Mrs Saltire’s 2022 BMW i3S
-
Saltire - God
- Posts: 2457
- Joined: Sun 05.04.2015, 22:27
- Location: Left foot in Wiltshire, right foot in Gloucestershire, heart in Scotland
Re: Binnacle cover screws
by dapinky » Thu 11.01.2018, 10:07
Unless you are ordering other stuff, the P&P from SJs will be a killer on that part, so I'd just get some off ebay or any local supplier (it's only a standard setscrew, nowt special about it)
Dave
Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it
...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it
...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
-
dapinky - LEC Administrator
- Posts: 10605
- Joined: Sun 15.10.2006, 12:54
- Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).
Re: Binnacle cover screws
by elaverick » Thu 11.01.2018, 11:15
Thanks both, this forum never ceases to amaze me 
I'm not going to go with those exact screws anyway as I need longer ones. I've had my binnacle cover re-covered by Sean at Inspire Automotive but since the furrows in it are too deep and narrow to cover, he's has to flatten them out, so I now need longer screws to secure the cover. (It's all a prelude to having the entire dash covered once I've put a little cash aside for that project)
I'm not going to go with those exact screws anyway as I need longer ones. I've had my binnacle cover re-covered by Sean at Inspire Automotive but since the furrows in it are too deep and narrow to cover, he's has to flatten them out, so I now need longer screws to secure the cover. (It's all a prelude to having the entire dash covered once I've put a little cash aside for that project)
-
elaverick - Tinkerer
- Posts: 93
- Joined: Tue 23.06.2009, 15:33
- Location: Bristol, United Kingdom
Re: Binnacle cover screws
by GeoffSmith » Thu 11.01.2018, 11:40
I added lightness and didn't bother replacing them many years ago.
Calypso Red S2 #417
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
-
GeoffSmith - Kitty Fiddler
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 6 guests