Part number for MEM-CAL for S2

Moderators: theelanman, dapinky, Dave Eds, Nige, DaveT, Sy V, Elanlover, muley, Enright, algirdas, nitroman, clemo, Specky, GeoffSmith

Part number for MEM-CAL for S2

Postby Blaster » Thu 17.12.2020, 20:14

Does any one know the Lotus part number for the MEM-CAL for an S2

I thought that by buying an updated MEM-CAL and an O2 sensor at the same time from a well know Lotus dealer selling parts for our cars I would get sent the correct one.

Turns out I seem to know more than him in my short ownership of the Elan. All I got back was that was what you ordered and he knows nothing about which version is needed.

If I give him the part number he can order it which I suspect will cost me the same again with having to send mine in for the exchange.
Tony

1990 Lotus Elan SE 2009 Triumph Daytona 675SE
2012 KTM Freeride 350 2008 VW T5 4-Motion camper.
2019 Ace aviation Spirt 16 2018 AC Nitro 200 Ozone Speedster
User avatar
Blaster
Newbie
 
Posts: 49
Joined: Tue 18.08.2020, 22:29
Location: Hertford

Re: Part number for MEM-CAL for S2

Postby dapinky » Thu 17.12.2020, 20:54

I'm not sure that the memcal has a part number itself - it is (obviously!) included in the ECU, and that has various part numbers dependent on the car/market it was aimed at.

Page 17.06A of the parts book will show you the options, and for the UK S2 you will need the 'USA - 49 states' version.

The memcal PROM ID is 1499 if that helps........
Dave

Just the one now, but this one's mine! - and it will be finished eventually.....

go on - click this link - you know you want to!
User avatar
dapinky
LEC Administrator
 
Posts: 8933
Joined: Sun 15.10.2006, 12:54
Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).

Re: Part number for MEM-CAL for S2

Postby Blaster » Thu 17.12.2020, 21:00

Thanks,

That's what I quoted and it went straight over his head.

On the plus side I should be able to get the CO down for it's MOT with a 9930 prom, but it would be nice to put the O2 sensor in that I have.

I have had to buy a bung for now as I took the old one out and it nearly sheered in half.
Tony

1990 Lotus Elan SE 2009 Triumph Daytona 675SE
2012 KTM Freeride 350 2008 VW T5 4-Motion camper.
2019 Ace aviation Spirt 16 2018 AC Nitro 200 Ozone Speedster
User avatar
Blaster
Newbie
 
Posts: 49
Joined: Tue 18.08.2020, 22:29
Location: Hertford

Re: Part number for MEM-CAL for S2

Postby RonR » Thu 17.12.2020, 22:37

You can get a whole ECM including the 1499 Memcal under part number A100E6533F - Current price is 134.15 + VAT on DeRoure, assuming there are some left in stock.
I have one on my car as part of a closed loop upgrade and it works a treat!

If you sell off the old ECM you may even make a profit!
User avatar
RonR
Enthusiast
 
Posts: 199
Joined: Mon 22.08.2016, 20:25
Location: Bromley

Re: Part number for MEM-CAL for S2

Postby Blaster » Thu 17.12.2020, 23:45

Thanks for that.

I have ordered we will see what happens.
Tony

1990 Lotus Elan SE 2009 Triumph Daytona 675SE
2012 KTM Freeride 350 2008 VW T5 4-Motion camper.
2019 Ace aviation Spirt 16 2018 AC Nitro 200 Ozone Speedster
User avatar
Blaster
Newbie
 
Posts: 49
Joined: Tue 18.08.2020, 22:29
Location: Hertford

Re: Part number for MEM-CAL for S2

Postby Blaster » Wed 06.01.2021, 14:53

The new ECU with closed loop MEM-CAL arrived today.

Working at home with all the bits to upgrade to closed loop but not being able to until it gets dark will mean it will have to wait.
You do not have the required permissions to view the files attached to this post.
Tony

1990 Lotus Elan SE 2009 Triumph Daytona 675SE
2012 KTM Freeride 350 2008 VW T5 4-Motion camper.
2019 Ace aviation Spirt 16 2018 AC Nitro 200 Ozone Speedster
User avatar
Blaster
Newbie
 
Posts: 49
Joined: Tue 18.08.2020, 22:29
Location: Hertford


Return to Upgrades

Who is online

Users browsing this forum: No registered users and 2 guests