SAMCO HOSES

Moderators: theelanman, Sy V, Elanlover, muley, Enright, GeoffSmith, algirdas, nitroman, clemo, dapinky, Dave Eds, Specky, Nige, DaveT

SAMCO HOSES

Postby james@amber » Wed 29.10.2008, 12:03

hi,

I thought i would update everybody with the current prices and colours avaliable for the samco hoses, for both the UK and FED spec hose kits.

UK SPEC - TCS330/C
HOSE KIT £275.43
CLIP KIT £40.10

FED SPEC - TCS354/C
HOSE KIT £273.54
CLIP KIT £47.86

COLOUR OPTIONS

BLUE
RED
BLACK
PURPLE
BRITISH RACING GREEN
ORANGE
LIME GREEN
YELLOW

Extra percentage cost will be applied to following hose colours :

PINK +15%
VIPER RED +15%
WHITE +15%
SILVER +15%
CLASSIC BLACK +15%
GUN METAL GREY +15%
BLAZE (FLAME) +35%
CAMOUFLAGE +35%

Image


All prices include UK VAT @ 17.5%.

LEC MEMBERS WILL RECIEVE -20% DISCOUNT OFF ALL THE SAMCO HOSE PRICES

Delivery to UK mainland addresses are £10.00, anywhere else in the world, please email me for a quote.

best regards

james
Last edited by james@amber on Wed 06.01.2010, 15:33, edited 4 times in total.
Image
User avatar
james@amber
Newbie
 
Posts: 22
Joined: Wed 29.11.2006, 18:52
Location: Dunstable, Beds, UK

Re: SAMCO HOSES

Postby Sy V » Wed 29.10.2008, 12:17

James

Thanks for this update and the other info ref blank hoses in the main thread.
Your continued support and discounts are much appreciated by all.

Sy V
Image

Talk and song from tongues of lilting grace, sounds caress my ears but not a word I heard could I relay, the story was quite clear - Robert Plant
User avatar
Sy V
LEC Godfather
 
Posts: 5927
Joined: Mon 21.04.2003, 07:06
Location: Lydiate Ash, Bromsgrove, Worcestershire.

Re: SAMCO HOSES

Postby nitroman » Thu 30.10.2008, 05:45

James, I need to swap my unused red kit for a black one (we spoke on this months ago. I'm so faaassst!). By looking at your prices above I should only return the hoses & not the clips, correct? That will also lighten the packages shipped in each direction across the briny blue.
Strive for perfection in everything. (given time)
Take the best that exists & make it better. (given inclination)
If it doesn't exist, create it. (God did)
Ignore what I say. (good advice)
User avatar
nitroman
Moderator
 
Posts: 3554
Joined: Fri 18.04.2003, 01:17
Location: Jacksonville, FL

Re: SAMCO HOSES

Postby james@amber » Thu 30.10.2008, 10:14

hi,

yeah just send them back, and i will swap them over for you. its ok, the jubilee clips will fit the new black colour hoses :D :D :D

cheers

james
Image
User avatar
james@amber
Newbie
 
Posts: 22
Joined: Wed 29.11.2006, 18:52
Location: Dunstable, Beds, UK

Re: SAMCO HOSES

Postby BFG in the BRG » Thu 07.01.2010, 17:50

Just to let you know - I've just ordered a set of Samco's incl SS Clips for a 1992 SE Turbo current price is £262.42 incl VAT and delivery.

The LEC Discount still rocks :banana:
Alas soon to be Elan-less
I keep telling myself it is for the best
User avatar
BFG in the BRG
Fanatic
 
Posts: 457
Joined: Tue 13.05.2008, 14:13
Location: Eastbourne (God's Waiting Room)

Three cheers for James!

Postby tigerdog » Fri 15.01.2010, 20:46

...and for Amber Performance for their continued support of the LEC community!
"Refitting is the reverse sequence to removal, but you swear in different places."
User avatar
tigerdog
God
 
Posts: 2562
Joined: Tue 20.03.2007, 09:07
Location: San Diego, CA, USA

Re: SAMCO HOSES

Postby tomac1975 » Mon 08.03.2010, 14:34

Are these hoses the same for the N/A?

Cheers,

Tom
tomac1975
Enthusiast
 
Posts: 243
Joined: Sun 03.01.2010, 16:52
Location: South Bucks Iver

Re: SAMCO HOSES

Postby Specky » Mon 08.03.2010, 19:21

Good question,

I asked the same question, never gotta an answer thou....

TTFN
If you have a problem, if no one else can help, and if you can find them, maybe you can hire... The N/A-Team.
User avatar
Specky
Moderator
 
Posts: 6001
Joined: Sun 07.09.2003, 23:19
Location: Swindon

Re: SAMCO HOSES

Postby tigerdog » Mon 08.03.2010, 20:41

Specky, I'd think a quick look would be all that's required if have both a norma and turbo in hand. I'd also think the hoses would be the same, or at least close enough. You obviously wouldn't use the two small turbo hoses and might need to double-check the ones to the throttle body since they connect to the thermostat housing and that's a bit different on a norma. But what do I know? I don't have a norma close by. :)
"Refitting is the reverse sequence to removal, but you swear in different places."
User avatar
tigerdog
God
 
Posts: 2562
Joined: Tue 20.03.2007, 09:07
Location: San Diego, CA, USA

Re: SAMCO HOSES

Postby Specky » Mon 08.03.2010, 21:15

I would surmise they are the same as well...

the N/A pipes are now located all over the place... :roll:

I could look at the IPC that'd let me know

TTFN
If you have a problem, if no one else can help, and if you can find them, maybe you can hire... The N/A-Team.
User avatar
Specky
Moderator
 
Posts: 6001
Joined: Sun 07.09.2003, 23:19
Location: Swindon

Re: SAMCO HOSES

Postby BFG in the BRG » Thu 22.04.2010, 21:48

Well, that was fun - fitting the hoses - 7 hours, including project creep - good piece of kit though,

the only problem is I have a pipe left over which I can't find a home for.

If straightened out it would be around 9 inches long and about as thick as your finger.

It is pipe number 2038 - piccie below.

Mystery Pipe.JPG


Any ideas? :oops:

It's similar to one of the hoses which sits around the thermostat housing - but I've done all them - part of me thinks it might be round the turbo - but I can't any similar hoses?

'91 SE Turbo by the way
You do not have the required permissions to view the files attached to this post.
Alas soon to be Elan-less
I keep telling myself it is for the best
User avatar
BFG in the BRG
Fanatic
 
Posts: 457
Joined: Tue 13.05.2008, 14:13
Location: Eastbourne (God's Waiting Room)

Re: SAMCO HOSES

Postby Andy_J » Thu 22.04.2010, 22:35

PCV Pipe :?: :?:
90H BRG SE 48,000 Miles
90H Red SE 161,000 Miles - Breaking
56 Range Rover TDV8 Vogue SE Black 83,000 Miles
Andy_J
Fanatic
 
Posts: 564
Joined: Tue 22.04.2003, 17:17
Location: Inverness,

Re: SAMCO HOSES

Postby muley » Thu 22.04.2010, 22:36

It looks a bit like the one that got overlooked first time round, probably because it's hard to see - IIRC its around the top of the plenum chamber and one end is tucked away at the rear.

I'll have a close look in the morning.

Cheers

Jim
"You can take the man out of the Elan, but you can't take the Elan out of the man!"
1995 Red S2 number 750
"LEC turbo nutter" ;)Black MX-5 NC,. Red Honda Integra S
User avatar
muley
Moderator
 
Posts: 3845
Joined: Tue 22.04.2003, 09:07
Location: Wokingham, Berks and Waikanae Beach

Re: SAMCO HOSES

Postby tigerdog » Fri 23.04.2010, 04:13

Looks like the throttle body coolant feed. Take a look at the diagram in section KD of the Service Manual. It's really hard to see and a royal pain the change, if I recall.
"Refitting is the reverse sequence to removal, but you swear in different places."
User avatar
tigerdog
God
 
Posts: 2562
Joined: Tue 20.03.2007, 09:07
Location: San Diego, CA, USA

Re: SAMCO HOSES

Postby BFG in the BRG » Fri 23.04.2010, 22:14

Tigerdog I think you might be right, on both counts - throttle body coolant feed and pain to replace - I'll take a look on my next BRG day - (Thurs). Backs still aching from the work so far - trust me to pick yellow - it just looks grubby at the moment :roll: Still, it will clean up.....eventually. :mrgreen:
Alas soon to be Elan-less
I keep telling myself it is for the best
User avatar
BFG in the BRG
Fanatic
 
Posts: 457
Joined: Tue 13.05.2008, 14:13
Location: Eastbourne (God's Waiting Room)

Re: SAMCO HOSES

Postby BFG in the BRG » Wed 05.05.2010, 19:57

:ladysman:

You are indeed correct it was
1) well hidden
2) plenum chamber to thermostat housing
3) a bit of a swine to replace - but all done

:banana:
Alas soon to be Elan-less
I keep telling myself it is for the best
User avatar
BFG in the BRG
Fanatic
 
Posts: 457
Joined: Tue 13.05.2008, 14:13
Location: Eastbourne (God's Waiting Room)

Re: SAMCO HOSES

Postby rip » Wed 05.05.2010, 21:15

BFG in the BRG wrote: a bit of a swine to replace - but all done

:banana:


Only just noticed the thread but I recognised the pipe straight away.
Right bugger to get at. Well done!
1990 SE
User avatar
rip
God
 
Posts: 5701
Joined: Sun 08.04.2007, 07:48
Location: Milton Keynes, UK

Re: SAMCO HOSES

Postby Steve A » Sat 29.01.2011, 15:36

:D Got mine ordered 8)
"If everything is under control, you are going too slow."
User avatar
Steve A
God
 
Posts: 1807
Joined: Tue 18.09.2007, 12:44
Location: South East Essex

Re: SAMCO HOSES

Postby Steve A » Mon 14.02.2011, 00:05

:D Fitted them all today, some of them were tough to get at , but the most anoying thing was
all the hoses with the metal clasps :twisted: they were not only hard to get at but a bugger to get off :bonk:
I have very sore fingers :cry:
Was it worth all the effort ?
Whilst changinging the hoses I did wonder, but then found quiet a few mainly the smaller hoses that were in need of changing,
so that's a yes :wink:
"If everything is under control, you are going too slow."
User avatar
Steve A
God
 
Posts: 1807
Joined: Tue 18.09.2007, 12:44
Location: South East Essex

Re: SAMCO HOSES

Postby PECKHS » Wed 23.03.2011, 13:37

Are the hoses still available, and may I know how much is it to send to Singapore? Tks
PECKHS
Enthusiast
 
Posts: 239
Joined: Fri 03.09.2010, 10:34
Location: Singapore

Next

Return to Upgrades

Who is online

Users browsing this forum: No registered users and 1 guest

cron