Hi
I need to change my clutch cable I have tried in the pass but was unable to remove it from the bulkhead/ fire wall. Do I just pull it from the inside of the car???
| Home | WikiLEC | Repairs | Upgrades | Gallery | Buy & Sell | Mountain Chips | Meets & Events | Contact |
|
Clutch cable
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
2 posts
• Page 1 of 1
Clutch cable
by prsloper » Tue 10.12.2024, 13:22
- prsloper
- Newbie
- Posts: 13
- Joined: Fri 15.01.2010, 19:31
Re: Clutch cable
by Tuga2112 » Tue 10.12.2024, 14:56
i have a vague recollection thats howi removed it.
the harder part was feeding the new one from the inside of the car. it kept getting caught on the structure.
i would strongly suggest you attach a rope (or if possible also expandable tube like this)
https://www.amazon.ca/Aluminum-Flexible ... ZZWGS?th=1
to the cables before pulling them out so that routing the new one in can be a bit easier.
you just want the hose to serve as guidance for the new cables. so they dont get caught in whatever is inside that channel
the harder part was feeding the new one from the inside of the car. it kept getting caught on the structure.
i would strongly suggest you attach a rope (or if possible also expandable tube like this)
https://www.amazon.ca/Aluminum-Flexible ... ZZWGS?th=1
to the cables before pulling them out so that routing the new one in can be a bit easier.
you just want the hose to serve as guidance for the new cables. so they dont get caught in whatever is inside that channel
Still learning
Youtube Channel @Tuga2112 M100 repair videos
Youtube Channel @Tuga2112 M100 repair videos
-
Tuga2112 - God
- Posts: 3039
- Joined: Fri 12.09.2014, 22:54
- Location: Durham with a regular trip to Walsall
2 posts
• Page 1 of 1
Return to Transmission, and Clutch
Who is online
Users browsing this forum: No registered users and 4 guests