Clemo's Jim Clark edition (1 of 13 )

Moderators: theelanman, Sy V, Elanlover, muley, Enright, GeoffSmith, algirdas, nitroman, clemo, dapinky, Dave Eds, Specky, Nige, DaveT

Re: Clemo's Jim Clark edition (1 of 6)

Postby simonbuk » Sun 06.08.2017, 20:41

Do you need any green bits ?!
Simon - Black S2. Simonthesailor

"Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did so. So buy an Elan" - Mark Twain.
User avatar
simonbuk
God
 
Posts: 782
Joined: Sun 13.03.2016, 12:50
Location: Orpington, Kent, sometimes Worthing, West Sussex sometimes The World !!

Re: Clemo's Jim Clark edition (1 of 6)

Postby muley » Sun 06.08.2017, 20:46

Clemo

The ebay ad. IS for coolexperts (under a slightly different guise)

Check out their header tank, too.

http://www.ebay.co.uk/itm/ALUMINIUM-HEA ... SwxH1T~NQG


Jim
"You can take the man out of the Elan, but you can't take the Elan out of the man!"
1995 Red S2 number 750
"LEC turbo nutter" ;)Black MX-5 NC,. Red Honda Integra S
User avatar
muley
Moderator
 
Posts: 3829
Joined: Tue 22.04.2003, 09:07
Location: Wokingham, Berks and Waikanae Beach

Re: Clemo's Jim Clark edition (1 of 6)

Postby Brit-Car-Nut » Sun 06.08.2017, 20:50

Here is their LEC posting: viewtopic.php?f=44&t=17345&p=302401#p302401

The price quoted is £160.00 plus £15.00 which includes VAT
Last edited by Brit-Car-Nut on Sun 06.08.2017, 21:18, edited 1 time in total.
HD Replacement Shift Cables and Short Shift Kits still available
HD Replacement Shift Cable and Short-Shift Kit prices
Please contact me via eMail, not by PM
Download Manuals Here
Brit-Car-Nut
God
 
Posts: 3558
Joined: Tue 03.07.2007, 17:07
Location: Charlotte, NC USA

Re: Clemo's Jim Clark edition (1 of 6)

Postby clemo » Sun 06.08.2017, 21:06

Brit-Car-Nut wrote:Here is their LEC posting:https://forum.lotuselancentral.com/viewtopic.php?f=44&t=17345&p=302401#p302401

The price quoted is £160.00 plus £15.00 which includes VAT



Cheers BCN ... link is broken ... is this the thread that was about the ill fitting rads ?
Jim Clark S2 on the way . The one with the Yellow spoke wheels .
User avatar
clemo
Moderator
 
Posts: 3994
Joined: Mon 21.04.2003, 23:24
Location: TORQUAY .WESTSIDE well south west side in the southern bit.

Re: Clemo's Jim Clark edition (1 of 6)

Postby clemo » Sun 06.08.2017, 21:07

muley wrote:Clemo

The ebay ad. IS for coolexperts (under a slightly different guise)

Check out their header tank, too.

http://www.ebay.co.uk/itm/ALUMINIUM-HEA ... SwxH1T~NQG


Jim


As in these guys are also cool experts ?

http://www.ebay.co.uk/itm/LOTUS-ELAN-M1 ... Ciid%253A1
Jim Clark S2 on the way . The one with the Yellow spoke wheels .
User avatar
clemo
Moderator
 
Posts: 3994
Joined: Mon 21.04.2003, 23:24
Location: TORQUAY .WESTSIDE well south west side in the southern bit.

Re: Clemo's Jim Clark edition (1 of 6)

Postby muley » Sun 06.08.2017, 21:09

clemo wrote:
muley wrote:Clemo

The ebay ad. IS for coolexperts (under a slightly different guise)

Check out their header tank, too.

http://www.ebay.co.uk/itm/ALUMINIUM-HEA ... SwxH1T~NQG


Jim


As in these guys are also cool experts ?

http://www.ebay.co.uk/itm/LOTUS-ELAN-M1 ... Ciid%253A1


Yes, that's the one I thought you'd posted earlier.


Jim
"You can take the man out of the Elan, but you can't take the Elan out of the man!"
1995 Red S2 number 750
"LEC turbo nutter" ;)Black MX-5 NC,. Red Honda Integra S
User avatar
muley
Moderator
 
Posts: 3829
Joined: Tue 22.04.2003, 09:07
Location: Wokingham, Berks and Waikanae Beach

Re: Clemo's Jim Clark edition (1 of 6)

Postby Brit-Car-Nut » Sun 06.08.2017, 21:20

I fixed the link but their eBay price is lower than their LEC price?

Call them. They have always given LEC a good deal.
HD Replacement Shift Cables and Short Shift Kits still available
HD Replacement Shift Cable and Short-Shift Kit prices
Please contact me via eMail, not by PM
Download Manuals Here
Brit-Car-Nut
God
 
Posts: 3558
Joined: Tue 03.07.2007, 17:07
Location: Charlotte, NC USA

Re: Clemo's Jim Clark edition (1 of 6)

Postby Steve A » Sun 06.08.2017, 21:34

yes window seals are now required as we chopped the old ones off to spray all the way up to avoid paint edge ... thinking of using the Honda ones .


:? Hello did I miss something here :poke: :poke:
"If everything is under control, you are going too slow."
User avatar
Steve A
God
 
Posts: 1765
Joined: Tue 18.09.2007, 12:44
Location: South East Essex

Re: Clemo's Jim Clark edition (1 of 6)

Postby clemo » Sun 06.08.2017, 21:39

Steve A wrote:
yes window seals are now required as we chopped the old ones off to spray all the way up to avoid paint edge ... thinking of using the Honda ones .


:? Hello did I miss something here :poke: :poke:


Jamie N used some Honda window rubbers for the external seal ( for the door tops to wing mirror sealed bit)
Jim Clark S2 on the way . The one with the Yellow spoke wheels .
User avatar
clemo
Moderator
 
Posts: 3994
Joined: Mon 21.04.2003, 23:24
Location: TORQUAY .WESTSIDE well south west side in the southern bit.

Re: Clemo's Jim Clark edition (1 of 6)

Postby Steve A » Sun 06.08.2017, 23:04

clemo wrote:
Steve A wrote:
yes window seals are now required as we chopped the old ones off to spray all the way up to avoid paint edge ... thinking of using the Honda ones .


:? Hello did I miss something here :poke: :poke:


Jamie N used some Honda window rubbers for the external seal ( for the door tops to wing mirror sealed bit)

The problem with that is there isn't many early 2000 Honda civic EM's about :banghead:
We need an alternative Jamie :poke: :lol:
"If everything is under control, you are going too slow."
User avatar
Steve A
God
 
Posts: 1765
Joined: Tue 18.09.2007, 12:44
Location: South East Essex

Re: Clemo's Jim Clark edition (1 of 6)

Postby lotusarchives » Thu 24.08.2017, 19:42

Clemo,

For some reason I can't send you a PM, can you contact me at work?

Andy Graham
Lotus Archives
lotusarchives
Welcome to LEC - please introduce yourself
 
Posts: 1
Joined: Thu 24.08.2017, 14:54

Re: Clemo's Jim Clark edition (1 of 13 )

Postby Coolexperts » Mon 02.10.2017, 15:55

Hello All,

It is Steve from Coolex (AKA eBay radiator_specialist and Nottingham Radiators) Hope you are all well. I have had a couple of requests to fit our turbo fans to the radiator but need to know the position of the radiator / cradle for the non federal, rest of the world model. Does anyone have a cradle knocking around??? I would be able to check the measurements and refurb it for the kind member as a thank you. If I read it correctly the existing fan mountings should come off leaving the main bracket OK to take the tow hook and "Y" brackets. To answer the question, we do still do the all aluminium radiator and header tank, the intercooler and the oil cooler, for the M100 but they are a very unpopular low volume item for the members and non members. We are looking to be able to supply a slim all plastic turbo fan mounted onto the radiator free of the support bracket.

Steve 8) :D
User avatar
Coolexperts
Tinkerer
 
Posts: 75
Joined: Sat 23.03.2013, 18:21
Location: Nottingham UK

Re: Clemo's Jim Clark edition (1 of 13 )

Postby clemo » Tue 03.10.2017, 21:19

Hi Steve ,
Though i am not close to my car or boxes of bits , i do have the housing that you require
It will be some time till i will be close to them ( Torquay to Stafford ) but when i do i will did them out and send them your way .
That is unless anyone else can help out first .
Jim Clark S2 on the way . The one with the Yellow spoke wheels .
User avatar
clemo
Moderator
 
Posts: 3994
Joined: Mon 21.04.2003, 23:24
Location: TORQUAY .WESTSIDE well south west side in the southern bit.

Re: Clemo's Jim Clark edition (1 of 13 )

Postby tb10 » Tue 03.10.2017, 22:24

Hi Steve,

I have one and I'm probably going to be in Nottingham this Saturday and Sunday.................

regards

John
tb10
Fanatic
 
Posts: 592
Joined: Tue 18.05.2010, 23:16
Location: Bromsgrove - Worcestershire

Re: Clemo's Jim Clark edition (1 of 13 )

Postby tb10 » Tue 03.10.2017, 22:25

tb10 wrote:Hi Steve,

I have one and I'm probably going to be in Nottingham this Saturday and Sunday.................

regards

John


PS It needs refurbing!!
tb10
Fanatic
 
Posts: 592
Joined: Tue 18.05.2010, 23:16
Location: Bromsgrove - Worcestershire

Previous

Return to Projects - Other (Minor)

Who is online

Users browsing this forum: No registered users and 3 guests