Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by Ade » Wed 07.04.2010, 22:10
Hi,
I think without checking receipts about £550. Not sure what you mean about the no plate.
-
Ade
- Fanatic
-
- Posts: 311
- Joined: Tue 22.04.2003, 19:40
- Location: Broseley,Shropshire
by Blue_Bullet » Mon 12.04.2010, 00:19
The number plate is facing skywards!
I was just suggesting that I think it would look neater if panel could be made so that the plate can be fixed more square or parallel to the lights!
just a thought!
wish this was on my car!!!
was that £550 for lights, panel, fitting and paint job?
The answer is out there, It’s looking for you. And it will find you if you want it to!
-
Blue_Bullet
- Fanatic
-
- Posts: 301
- Joined: Tue 05.05.2009, 02:28
- Location: Zion
by Ade » Mon 12.04.2010, 13:22
Hi,
I take your point about the plate.
The cost I posted did not include the paint job, as I did it myself with paint I already had, so no cost involved, but obviously that would have to be factored in.
Ade
-
Ade
- Fanatic
-
- Posts: 311
- Joined: Tue 22.04.2003, 19:40
- Location: Broseley,Shropshire
by rip » Mon 12.04.2010, 13:52
Blue_Bullet wrote:Just a thought but I think it would look better if the number plate could be made more square with the lights!
The issue is that the plate needs to be illuminated. The angle makes it easier to fit the light at the top without being an eyesore. If the light is in the boot lid itself (like mine) it doubles up as an excellent boot light, much better than the OEM one which is usually obscured by luggage when you want it most.
1990 SE
-
rip
- God
-
- Posts: 5893
- Joined: Sun 08.04.2007, 07:48
- Location: Milton Keynes, UK
by ricky1858 » Sat 27.09.2014, 22:59
hello I just joined this sight I own a 1991 m100 and would like to buy the rear convertion light kit can someone help me on where to look .
-
ricky1858
- Newbie
-
- Posts: 2
- Joined: Sat 27.09.2014, 21:28
by ricky1858 » Sat 27.09.2014, 23:27
-
ricky1858
- Newbie
-
- Posts: 2
- Joined: Sat 27.09.2014, 21:28
by chrisP » Sun 12.10.2014, 23:59
Send me a PM I might be able to help you.
Regards
Chris
-
chrisP
- Fanatic
-
- Posts: 633
- Joined: Fri 13.06.2003, 12:28
- Location: Hertfordshire
by DavidEJM » Mon 13.10.2014, 22:56
Hey Ricky fella, that's a nice car in your avatar!
Oooooh shiney!
-
DavidEJM
- Fanatic
-
- Posts: 360
- Joined: Tue 19.01.2010, 21:58
- Location: Oxford
by Tuga2112 » Sat 18.10.2014, 20:37
very good result, if i didnt have an elan myself i would think your lights were fitted from factory.
congrats.
-
Tuga2112
- God
-
- Posts: 2174
- Joined: Fri 12.09.2014, 22:54
- Location: Durham with a regular trip to Walsall
by metaphoria » Wed 04.01.2017, 18:41
Hello All,
How Can i contact ChrisP ( i suppose ) ? Im interested for a conversion kit.
I know its a very old Post but i cant send him a PM.
Thanks for Help
-
metaphoria
- Newbie
-
- Posts: 2
- Joined: Wed 04.01.2017, 18:01
- Location: Aix Les Bains France
by clemo » Sun 08.01.2017, 12:28
metaphoria wrote:Hello All,
How Can i contact ChrisP ( i suppose ) ? Im interested for a conversion kit.
I know its a very old Post but i cant send him a PM.
Thanks for Help
Hello Metaphoria .
Welcome to LEC .
You should now be able to send PM's .
Good luck with your modifications with your elan .
Jim Clark S2 - 1/12. The one with the Yellow spoke wheels . No 613 on dash (pushed in to factory in wrong order 615 on tub)
-
clemo
- LEC Administrator
-
- Posts: 5062
- Joined: Mon 21.04.2003, 23:24
- Location: TORQUAY Devon. Cream first then Jam obviously.
by chrisP » Mon 09.01.2017, 15:55
I am loitering on here from time to time, so send me a PM and I will get back to you - with-in a few days. I am still making the pods or panels to order. They do take 4-6 weeks to make though.
Best Chris
-
chrisP
- Fanatic
-
- Posts: 633
- Joined: Fri 13.06.2003, 12:28
- Location: Hertfordshire
by metaphoria » Wed 11.01.2017, 02:06
Thanks for help and reply !
i'll send a PM to Chris right now
Best regards from France
-
metaphoria
- Newbie
-
- Posts: 2
- Joined: Wed 04.01.2017, 18:01
- Location: Aix Les Bains France
by NateW » Sat 04.03.2017, 07:29
Chris P
Hi I'm Nate in California, love the rear light panels
would love to buy them. Can't message for some reason,
I just joined LEC.
I have a 91 Elan USA spec in Norfolk yellow.
Please reach let me know how to contact you.
-
NateW
- Welcome to LEC - please introduce yourself
-
- Posts: 1
- Joined: Sat 04.03.2017, 07:21
by chrisP » Mon 06.03.2017, 12:57
Hi Nate
Thanks for the message, unfortunately I cannot send panels to the USA as they are fragile and making packing boxes and arranging transport is time consuming and no fun. May I suggest that you have a chat with Marie as she made panels for the US guys some time back.
Best Regards
Chris
-
chrisP
- Fanatic
-
- Posts: 633
- Joined: Fri 13.06.2003, 12:28
- Location: Hertfordshire
by wingnut100 » Thu 16.11.2017, 15:20
chrisP wrote:Send me a PM I might be able to help you.
Regards
Chris
Hi Chris, do you still have a contact with the chap who has the moulds for the M100 rear light conversion. Cheers Colin
-
wingnut100
- Newbie
-
- Posts: 2
- Joined: Sun 28.08.2016, 18:48
by chrisP » Mon 20.11.2017, 14:08
Hi Colin
I am the person that made the moulds for some of the conversions, Marie was another. Unfortunately they take too long to make and I will not be making anymore.
Best Regards
Chris
-
chrisP
- Fanatic
-
- Posts: 633
- Joined: Fri 13.06.2003, 12:28
- Location: Hertfordshire
Return to Projects - Other (Minor)
Who is online
Users browsing this forum: No registered users and 2 guests