I would like to get the orders in place for these up grades in the next week or so and will be ordering a few extra hubs as the extras dissapeared quickly last time.
I would ask the people that are ordering the hubs email me direct with their details, name and address and I can then send you payment details.
Those that are ordering the rear brake upgrades I will send you a spread sheet if you could fill it in and email it back that will save any confusion over colour, size and pads etc.
There is also the option to have the hubs supplied with new SKF bearings all ready fitted cost extra £24.00 per hub pair
Bob
| Home | WikiLEC | Repairs | Upgrades | Gallery | Buy & Sell | Mountain Chips | Meets & Events | Contact |
|
Rear Hub/Disc conversion second run + Hi-spec brakes
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
Re: Rear Hub/Disc conversion second run
by bobbrown » Thu 30.04.2009, 10:26
Pacific Blue N/A
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
-
bobbrown - God
- Posts: 2804
- Joined: Wed 10.05.2006, 12:51
- Location: North Essex
Re: Rear Hub/Disc conversion second run
by ektrolleyboy » Thu 30.04.2009, 12:32
You already know I'm up for this Bob, A.S.A.P.
So for the benefit of this forum add my name to the list. (computer illeterate!)
So for the benefit of this forum add my name to the list. (computer illeterate!)
Pacific Blue-LOTUS ELAN S2 # 036 / Hot Orange-MINI COOPER S CABRIOLET
- ektrolleyboy
- God
- Posts: 774
- Joined: Sat 11.11.2006, 11:35
- Location: Heaven And Hell!
Re: Rear Hub/Disc conversion second run
by texas2201 » Thu 30.04.2009, 13:27
payment sent Bob
"brakes are no good - they just slow you down" Fangio 
-
texas2201 - God
- Posts: 1379
- Joined: Fri 30.06.2006, 17:24
- Location: Boos Eifel Germany
Re: Rear Hub/Disc conversion second run
by bobbrown » Thu 30.04.2009, 13:32
01. alexg + Brakes (Front and Rear)
02. whippit
03. Jimmer
04. martin_bailey_1
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. Phil
15. texas2201 + bearings + discs for std caliper(paid)
16. ektrolleyboy
02. whippit
03. Jimmer
04. martin_bailey_1
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. Phil
15. texas2201 + bearings + discs for std caliper(paid)
16. ektrolleyboy
Pacific Blue N/A
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
-
bobbrown - God
- Posts: 2804
- Joined: Wed 10.05.2006, 12:51
- Location: North Essex
Re: Rear Hub/Disc conversion second run
by MPx » Thu 30.04.2009, 22:02
01. alexg + Brakes (Front and Rear)
02. whippit
03. Jimmer
04. martin_bailey_1
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. Phil
15. texas2201 + bearings + discs for std caliper(paid)
16. ektrolleyboy
17. MPx + brakes (Hispec front in progress)
02. whippit
03. Jimmer
04. martin_bailey_1
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. Phil
15. texas2201 + bearings + discs for std caliper(paid)
16. ektrolleyboy
17. MPx + brakes (Hispec front in progress)
Mike - MPx
95 M100 Elan S2 (423)
86 Turbo Esprit
but no longer Carlton no 808 nor Sunbeam S1
95 M100 Elan S2 (423)
86 Turbo Esprit
but no longer Carlton no 808 nor Sunbeam S1
-
MPx - God
- Posts: 822
- Joined: Mon 05.06.2006, 22:50
- Location: Somerset, England
Re: Rear Hub/Disc conversion second run
by bobbrown » Fri 01.05.2009, 00:09
List amended :
01. alexg + Brakes (Front and Rear)
02. whippit
03. Jimmer
04. martin_bailey_1
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy
16. MPx + brakes (Hispec front in progress)
01. alexg + Brakes (Front and Rear)
02. whippit
03. Jimmer
04. martin_bailey_1
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy
16. MPx + brakes (Hispec front in progress)
Pacific Blue N/A
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
-
bobbrown - God
- Posts: 2804
- Joined: Wed 10.05.2006, 12:51
- Location: North Essex
Re: Rear Hub/Disc conversion second run
by whippit » Fri 01.05.2009, 01:17
01. alexg + Brakes (Front and Rear)
02. whippit + Brakes (front and rear) +bearings
03. Jimmer
04. martin_bailey_1
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy
16. MPx + brakes (Hispec front in progress)
02. whippit + Brakes (front and rear) +bearings
03. Jimmer
04. martin_bailey_1
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy
16. MPx + brakes (Hispec front in progress)
- whippit
- Fanatic
- Posts: 289
- Joined: Mon 09.04.2007, 00:34
- Location: southport
Re: Rear Hub/Disc conversion second run
by mnemonix » Fri 01.05.2009, 01:26
01. alexg + Brakes (Front and Rear)
02. whippit + Brakes (front and rear) +bearings
03. Jimmer
04. martin_bailey_1
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy
16. MPx + brakes (Hispec front in progress)[/quote]
17. mnemonix + bearings + brakes (front & rear)
02. whippit + Brakes (front and rear) +bearings
03. Jimmer
04. martin_bailey_1
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy
16. MPx + brakes (Hispec front in progress)[/quote]
17. mnemonix + bearings + brakes (front & rear)
-
mnemonix - Fanatic
- Posts: 269
- Joined: Tue 02.09.2008, 10:40
- Location: West London
Re: Rear Hub/Disc conversion second run
by martin_bailey_1 » Fri 01.05.2009, 22:23
01. alexg + Brakes (Front and Rear)
02. whippit + Brakes (front and rear) +bearings
03. Jimmer
04. martin_bailey_1 + bearings fitted + discs to suit standard rear brakes (paid)
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy
16. MPx + brakes (Hispec front in progress)[/quote]
17. mnemonix + bearings + brakes (front & rear)
02. whippit + Brakes (front and rear) +bearings
03. Jimmer
04. martin_bailey_1 + bearings fitted + discs to suit standard rear brakes (paid)
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy
16. MPx + brakes (Hispec front in progress)[/quote]
17. mnemonix + bearings + brakes (front & rear)
-
martin_bailey_1 - Enthusiast
- Posts: 172
- Joined: Thu 23.10.2008, 16:58
- Location: Heath Village, Derbyshire
Re: Rear Hub/Disc conversion second run
by Ekapol » Sat 02.05.2009, 06:03
01. alexg + Brakes (Front and Rear)
02. whippit + Brakes (front and rear) +bearings
03. Jimmer
04. martin_bailey_1 + bearings fitted + discs to suit standard rear brakes (paid)
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy
16. MPx + brakes (Hispec front in progress)
17. mnemonix + bearings + brakes (front & rear)
18. Ekapol
02. whippit + Brakes (front and rear) +bearings
03. Jimmer
04. martin_bailey_1 + bearings fitted + discs to suit standard rear brakes (paid)
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy
16. MPx + brakes (Hispec front in progress)
17. mnemonix + bearings + brakes (front & rear)
18. Ekapol
"Do or do not.... there is no try."
“Named must your fear be before banish it you can.” -- Yoda
“Named must your fear be before banish it you can.” -- Yoda
-
Ekapol - God
- Posts: 1463
- Joined: Mon 19.06.2006, 21:55
- Location: Sin City
Re: Rear Hub/Disc conversion second run
by ashm » Sat 02.05.2009, 19:16
01. alexg + Brakes (Front and Rear)
02. whippit + Brakes (front and rear) +bearings
03. Jimmer
04. martin_bailey_1 + bearings fitted + discs to suit standard rear brakes (paid)
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy
16. MPx + brakes (Hispec front in progress)
17. mnemonix + bearings + brakes (front & rear)
18. Ekapol
19. ashm + bearings + discs for std caliper
Cheers!
02. whippit + Brakes (front and rear) +bearings
03. Jimmer
04. martin_bailey_1 + bearings fitted + discs to suit standard rear brakes (paid)
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy
16. MPx + brakes (Hispec front in progress)
17. mnemonix + bearings + brakes (front & rear)
18. Ekapol
19. ashm + bearings + discs for std caliper
Cheers!
-
ashm - God
- Posts: 866
- Joined: Sat 14.02.2009, 11:32
- Location: South Wales
Re: Rear Hub/Disc conversion second run
by kmckmc » Sun 03.05.2009, 16:02
01. alexg + Brakes (Front and Rear)
02. whippit + Brakes (front and rear) +bearings
03. Jimmer
04. martin_bailey_1 + bearings fitted + discs to suit standard rear brakes (paid)
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy
16. MPx + brakes (Hispec front in progress)
17. mnemonix + bearings + brakes (front & rear)
18. Ekapol
19. ashm + bearings + discs for std caliper
20.kmckmc
02. whippit + Brakes (front and rear) +bearings
03. Jimmer
04. martin_bailey_1 + bearings fitted + discs to suit standard rear brakes (paid)
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy
16. MPx + brakes (Hispec front in progress)
17. mnemonix + bearings + brakes (front & rear)
18. Ekapol
19. ashm + bearings + discs for std caliper
20.kmckmc
Elan M100 S2
- kmckmc
- Fanatic
- Posts: 532
- Joined: Tue 21.03.2006, 10:40
- Location: Taipei 101 Building, Taiwan
Re: Rear Hub/Disc conversion second run
by chrisP » Thu 07.05.2009, 12:11
01. alexg + Brakes (Front and Rear)
02. whippit + Brakes (front and rear) +bearings
03. Jimmer
04. martin_bailey_1 + bearings fitted + discs to suit standard rear brakes (paid)
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy
16. MPx + brakes (Hispec front in progress)
17. mnemonix + bearings + brakes (front & rear)
18. Ekapol
19. ashm + bearings + discs for std caliper
20.kmckmc
21. ChrisP + brakes (hispec 298mm on the front)
02. whippit + Brakes (front and rear) +bearings
03. Jimmer
04. martin_bailey_1 + bearings fitted + discs to suit standard rear brakes (paid)
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy
16. MPx + brakes (Hispec front in progress)
17. mnemonix + bearings + brakes (front & rear)
18. Ekapol
19. ashm + bearings + discs for std caliper
20.kmckmc
21. ChrisP + brakes (hispec 298mm on the front)
-
chrisP - Fanatic
- Posts: 639
- Joined: Fri 13.06.2003, 12:28
- Location: Hertfordshire
Re: Rear Hub/Disc conversion second run
by bobbrown » Thu 07.05.2009, 14:14
I am going to place an order for 72 hubs tomorrow.
That will mean the list can continue untill we get to 36 but that is the cut off point.
Bob
That will mean the list can continue untill we get to 36 but that is the cut off point.
Bob
Pacific Blue N/A
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
-
bobbrown - God
- Posts: 2804
- Joined: Wed 10.05.2006, 12:51
- Location: North Essex
Re: Rear Hub/Disc conversion second run
by RichardK » Thu 07.05.2009, 18:02
Gawd Bob, will the Astra's boot take it all!?!?! 
CAPETOWN - RED 92 SE: V5 and LGM Turbo Installed
NEW ORLEANS - YELLOW 91 FED. Stock.
NEW ORLEANS - YELLOW 91 FED. Stock.
-
RichardK - Fanatic
- Posts: 375
- Joined: Sat 07.07.2007, 12:25
- Location: New Orleans & Capetown
Re: Rear Hub/Disc conversion second run
by bobbrown » Thu 07.05.2009, 18:11
RichardK wrote:Gawd Bob, will the Astra's boot take it all!?!?!
Its only a short trip up the road so I did two trips last time but then there was only 56 as 12 went direct to the USA.
72 weighs in at 150kg "seems lighter when you put it down"
Bob
Pacific Blue N/A
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
-
bobbrown - God
- Posts: 2804
- Joined: Wed 10.05.2006, 12:51
- Location: North Essex
Re: Rear Hub/Disc conversion second run
by BFG in the BRG » Thu 07.05.2009, 23:18
Many thanks Bob for sorting this
01. alexg + Brakes (Front and Rear)
02. whippit + Brakes (front and rear) +bearings
03. Jimmer
04. martin_bailey_1 + bearings fitted + discs to suit standard rear brakes (paid)
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG - paid (hubs + Bearings + combined postage with the handbrake cables)
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy
16. MPx + brakes (Hispec front in progress)
17. mnemonix + bearings + brakes (front & rear)
18. Ekapol
19. ashm + bearings + discs for std caliper
20.kmckmc
21. ChrisP + brakes (hispec 298mm on the front)
01. alexg + Brakes (Front and Rear)
02. whippit + Brakes (front and rear) +bearings
03. Jimmer
04. martin_bailey_1 + bearings fitted + discs to suit standard rear brakes (paid)
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG - paid (hubs + Bearings + combined postage with the handbrake cables)
09. Ben (vi11ain) + Brakes
10. Exbury
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy
16. MPx + brakes (Hispec front in progress)
17. mnemonix + bearings + brakes (front & rear)
18. Ekapol
19. ashm + bearings + discs for std caliper
20.kmckmc
21. ChrisP + brakes (hispec 298mm on the front)
Alas soon to be Elan-less
I keep telling myself it is for the best
I keep telling myself it is for the best
-
BFG in the BRG - Fanatic
- Posts: 457
- Joined: Tue 13.05.2008, 14:13
- Location: Eastbourne (God's Waiting Room)
Re: Rear Hub/Disc conversion second run
by Exbury » Mon 11.05.2009, 22:15
BFG in the BRG wrote:Many thanks Bob for sorting this
01. alexg + Brakes (Front and Rear)
02. whippit + Brakes (front and rear) +bearings
03. Jimmer
04. martin_bailey_1 + bearings fitted + discs to suit standard rear brakes (paid)
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG - paid (hubs + Bearings + combined postage with the handbrake cables)
09. Ben (vi11ain) + Brakes
10. Exbury Paid (Wilwood 15" upgrade-ish)
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy
16. MPx + brakes (Hispec front in progress)
17. mnemonix + bearings + brakes (front & rear)
18. Ekapol
19. ashm + bearings + discs for std caliper
20.kmckmc
21. ChrisP + brakes (hispec 298mm on the front)
'Who is to know what is possible until one has attempted the impossible and suceeded'
-
Exbury - Fanatic
- Posts: 291
- Joined: Tue 17.08.2004, 15:19
- Location: Welwyn Garden City
Re: Rear Hub/Disc conversion second run
by bobbrown » Tue 12.05.2009, 08:03
There are still people who are on this list who have yet to contact me, I will be placing the order for the calipers tomorrow and those that have not contacted me by then will suffer long delays as there is a lead time.
I can not just order calipers as I need to know size and colour required.
Also I need to get the money in as I have to pay for the parts and I am not making a profit just covering costs.
Those highlighted have been in touch with regards to brake upgrades as have some of the others with regards to the hubs but some of you have not and you know who you are, I hope.
01. alexg + Brakes
02. whippit + Brakes (front and rear) +bearings (Front and Rear)
03. Jimmer
04. martin_bailey_1 + bearings fitted + discs to suit standard rear brakes (paid)
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG - paid (hubs + Bearings + combined postage with the handbrake cables)
09. Ben (vi11ain) + Brakes
10. Exbury Paid (Wilwood 15" upgrade-ish)
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy + brakes
16. MPx + brakes (Hispec front in progress)
17. mnemonix + bearings + brakes (front & rear) Paid
18. Ekapol
19. ashm + bearings + discs for std caliper
20.kmckmc
21. ChrisP + brakes (hispec 298mm on the front)
22. saska = brakes
I can not just order calipers as I need to know size and colour required.
Also I need to get the money in as I have to pay for the parts and I am not making a profit just covering costs.
Those highlighted have been in touch with regards to brake upgrades as have some of the others with regards to the hubs but some of you have not and you know who you are, I hope.
01. alexg + Brakes
02. whippit + Brakes (front and rear) +bearings (Front and Rear)
03. Jimmer
04. martin_bailey_1 + bearings fitted + discs to suit standard rear brakes (paid)
05. Max and Andy
06. Andy_J
07. Alan (ab2cv) + Brakes (front upgrade in the pipeline!) + bearings (paid)
08. BFG in the BRG - paid (hubs + Bearings + combined postage with the handbrake cables)
09. Ben (vi11ain) + Brakes
10. Exbury Paid (Wilwood 15" upgrade-ish)
11. CJ + Brakes (Wilwood 16" front upgrade)
12. BigErch + Brakes (HiSpek 275 on the front)
13.Turners
14. texas2201 + bearings + discs for std caliper(paid)
15. ektrolleyboy + brakes
16. MPx + brakes (Hispec front in progress)
17. mnemonix + bearings + brakes (front & rear) Paid
18. Ekapol
19. ashm + bearings + discs for std caliper
20.kmckmc
21. ChrisP + brakes (hispec 298mm on the front)
22. saska = brakes
Pacific Blue N/A
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
-
bobbrown - God
- Posts: 2804
- Joined: Wed 10.05.2006, 12:51
- Location: North Essex
Re: Rear Hub/Disc conversion second run
by whippit » Tue 12.05.2009, 20:29
There are still people who are on this list who have yet to contact me, I will be placing the order for the calipers tomorrow and those that have not contacted me by then will suffer long delays as there is a lead time.
I can not just order calipers as I need to know size and colour required.
Also I need to get the money in as I have to pay for the parts and I am not making a profit just covering costs.
Those highlighted have been in touch with regards to brake upgrades as have some of the others with regards to the hubs but some of you have not and you know who you are, I hope.
bob i emailed you last tue, ive not had anything through, so thought you were to busy,
sorry , i dont want to miss out, so how do i get my detail to you, ???????
I can not just order calipers as I need to know size and colour required.
Also I need to get the money in as I have to pay for the parts and I am not making a profit just covering costs.
Those highlighted have been in touch with regards to brake upgrades as have some of the others with regards to the hubs but some of you have not and you know who you are, I hope.
bob i emailed you last tue, ive not had anything through, so thought you were to busy,
sorry , i dont want to miss out, so how do i get my detail to you, ???????
- whippit
- Fanatic
- Posts: 289
- Joined: Mon 09.04.2007, 00:34
- Location: southport
Who is online
Users browsing this forum: No registered users and 8 guests