Lotus Elan Central

Everything M100

Skip to content

Wheelarch liner - front edge s/s clamping plates **CLOSED**

Start your Group Buy threads here for anything pertaining to the M100

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Post a reply

Wheelarch liner - front edge s/s clamping plates **CLOSED**

Postby paulwatkins » Sun 31.05.2009, 17:57

Guys,
Geoff recently asked me about obtaining a set of stainless steel clamping plates for the front edge of the front wheelarch liners, where they fix to the fibreglass undertray. (Geoff, if you've got a picture, could you please post it up?). If your wheelarch liners are anything like mine, the leading edge has seen better days, and the front fixings are not too clever. This plate will clamp the liner across its span

I went to see the fabricator on friday, and he will be happy to produce them for us.

The clamp plates will be £5.00 for a set.(2no)

The fasteners will be £2.00 (this is for rubber rawl nuts with s/s machine screws and s/s washers (4no), to replace the plastic plug and self-tapper arrangement)

Postage will be £2.00 ish(guess)

Anyone else interested in a set if its a go-er?

1, paulwatkins
2,
3,
4,
5,
6,
7,
8,
9,
10,
Last edited by paulwatkins on Wed 24.06.2009, 18:54, edited 1 time in total.
User avatar
paulwatkins
God
 
Posts: 1431
Joined: Thu 13.04.2006, 08:54
Location: WsM, UK
Top

Re: Wheelarch liner - front edge s/s clamping plates

Postby GeoffSmith » Sun 31.05.2009, 18:14

1, paulwatkins
2, Geoff (no fasteners)
3,
4,
5,
6,
7,
8,
9,
10,
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire
Top

Re: Wheelarch liner - front edge s/s clamping plates

Postby saska » Sun 31.05.2009, 21:24

GeoffSmith wrote:1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4,
5,
6,
7,
8,
9,
10,
--
Tony
adw (at) saska.co.uk
saska
Sadly departed but never forgotten
 
Posts: 519
Joined: Tue 16.08.2005, 20:34
Location: Cumbria, UK
Top

Re: Wheelarch liner - front edge s/s clamping plates

Postby M100_DMM » Sun 31.05.2009, 21:31

I'm in.

1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 (+fasteners & P+P)
5,
6,
7,
8,
9,
10,
Serial Elan owner: 2002 - 2012. I may yet buy another one...
User avatar
M100_DMM
Fanatic
 
Posts: 393
Joined: Wed 28.03.2007, 13:28
Top

Re: Wheelarch liner - front edge s/s clamping plates

Postby GeoffSmith » Sun 31.05.2009, 21:43

Just so you know - I made these plates out of aluminium last year because the leading edge of my liner was drooping badly (and being made worse by collecting the passing wind no doubt) however when I took one off to measure it up for Paul, the liner has recovered well.
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire
Top

Re: Wheelarch liner - front edge s/s clamping plates

Postby BFG in the BRG » Mon 01.06.2009, 07:26

:oops: do you know, I still haven't got a clue which bit this is - I'll have a look next time I'm fiddling with the BRG :roll: .

However needless to say, this is a group buy and I never could resist one :banana:

I'm in - many thanks

1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6,
7,
8,
9,
10,
Alas soon to be Elan-less
I keep telling myself it is for the best
User avatar
BFG in the BRG
Fanatic
 
Posts: 457
Joined: Tue 13.05.2008, 14:13
Location: Eastbourne (God's Waiting Room)
Top

Re: Wheelarch liner - front edge s/s clamping plates

Postby woody » Mon 01.06.2009, 07:46

Count me in again - many thanks

1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7,
8,
9,
10,
Cheers
User avatar
woody
Fanatic
 
Posts: 529
Joined: Thu 04.03.2004, 17:38
Location: Nottingham, and Matlock UK
Top

Re: Wheelarch liner - front edge s/s clamping plates

Postby Nige » Mon 01.06.2009, 09:04

Sounds very sensible, I'm in for both cars.

1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7, Nige (+fasteners + P&P)
8, Nige (+fasteners + P&P)
9,
10,
Cheers
Back in Blighty
User avatar
Nige
LEC Administrator
 
Posts: 3030
Joined: Thu 10.07.2003, 19:04
Location: Dorset and Surrey
Top

Re: Wheelarch liner - front edge s/s clamping plates

Postby Gazza » Mon 01.06.2009, 10:33

1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7, Nige (+fasteners + P&P)
8, Nige (+fasteners + P&P)
9, Gazza (+fasteners + P&P)
10,
Cheers
S2 Midnight Blue #660
Hayward & Scott 2.5" exhaust.
Red AP brakes & Nitron adjustable suspension.
SOLD

TVR Tamora in Montreal Blue
User avatar
Gazza
God
 
Posts: 1703
Joined: Sun 15.05.2005, 08:55
Location: Romford, Essex.
Top

Re: Wheelarch liner - front edge s/s clamping plates

Postby Dico » Mon 01.06.2009, 15:18

I've no idea what they are either :D

1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7, Nige (+fasteners + P&P)
8, Nige (+fasteners + P&P)
9, Gazza (+fasteners + P&P)
10, Dico (+fasteners + P&P)
Cheers
4+ hours stuck in a damp bucket seat with a mad Irishman at the wheel - Deep joy!!!!
User avatar
Dico
Fool Boy Four - Founder
 
Posts: 3569
Joined: Mon 01.12.2003, 09:45
Location: Moderator Manchester
Top

Re: Wheelarch liner - front edge s/s clamping plates

Postby rip » Mon 01.06.2009, 15:37

Dico wrote:I've no idea what they are either :D


A group buy. All you need to know. :mrgreen:
1990 SE
User avatar
rip
God
 
Posts: 5904
Joined: Sun 08.04.2007, 07:48
Location: Milton Keynes, UK
Top

Re: Wheelarch liner - front edge s/s clamping plates

Postby blacknight » Mon 01.06.2009, 15:52

Yes please ;-)

Cheers

Iain
Winter is the new summer...............best buy a hat!
User avatar
blacknight
Fanatic
 
Posts: 287
Joined: Thu 01.03.2007, 17:13
Location: Working on an Elan is like a box of chocolates........every one is a coffee cream!
Top

Re: Wheelarch liner - front edge s/s clamping plates

Postby John_W » Mon 01.06.2009, 19:57

Dico wrote:I've no idea what they are either :D

Dico,
Just think of them being like Pot Noodle. Before they invented it, you didn't know you needed it. (Except Geoff's stuff isn't likely to make you :smt078 )

1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7, Nige (+fasteners + P&P)
8, Nige (+fasteners + P&P)
9, Gazza (+fasteners + P&P)
10, Dico (+fasteners + P&P)
11, Blacknight (+fasteners + P&P)
12, John_W (+fasteners + P&P)

John :-D
User avatar
John_W
Heid-bummer
 
Posts: 3780
Joined: Mon 21.04.2003, 12:31
Location: Aberdeen
Top

Re: Wheelarch liner - front edge s/s clamping plates

Postby AndyT » Tue 02.06.2009, 18:35

1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7, Nige (+fasteners + P&P)
8, Nige (+fasteners + P&P)
9, Gazza (+fasteners + P&P)
10, Dico (+fasteners + P&P)
11, Blacknight (+fasteners + P&P)
12, John_W (+fasteners + P&P)
13, AndyT (+fasteners + P&P)
User avatar
AndyT
Tinkerer
 
Posts: 53
Joined: Thu 06.03.2008, 23:35
Location: Clitheroe Lancashire
Top

Re: Wheelarch liner - front edge s/s clamping plates

Postby mvf906 » Wed 03.06.2009, 11:44

1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7, Nige (+fasteners + P&P)
8, Nige (+fasteners + P&P)
9, Gazza (+fasteners + P&P)
10, Dico (+fasteners + P&P)
11, Blacknight (+fasteners + P&P)
12, John_W (+fasteners + P&P)
13, AndyT (+fasteners + P&P)
14, mvf906 (+fasteners + P&P)
me in my head, shifting & drifting, mechanical music, adrenaline surge
User avatar
mvf906
Enthusiast
 
Posts: 104
Joined: Mon 30.07.2007, 09:29
Location: west sussex
Top

Re: Wheelarch liner - front edge s/s clamping plates

Postby Enright » Wed 03.06.2009, 22:33

1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7, Nige (+fasteners + P&P)
8, Nige (+fasteners + P&P)
9, Gazza (+fasteners + P&P)
10, Dico (+fasteners + P&P)
11, Blacknight (+fasteners + P&P)
12, John_W (+fasteners + P&P)
13, AndyT (+fasteners + P&P)
14, mvf906 (+fasteners + P&P)
15, Enright (+fasteners)

If poss I'll take mine with my clamping plates.
Striking fear into the hearts of duplicate posts everywhere...! :P

BCingU,
Neil ;-)
User avatar
Enright
Modificator
 
Posts: 4860
Joined: Sun 19.12.2004, 19:21
Location: Arnold, Nottingham, England
Top

Re: Wheelarch liner - front edge s/s clamping plates

Postby discovery » Sun 07.06.2009, 13:29

Please add me to the list for clamping plates+fasteners+p&p. Cheers
discovery
Enthusiast
 
Posts: 125
Joined: Fri 16.07.2004, 08:13
Location: Leeds ,West Yorks
Top

Re: Wheelarch liner - front edge s/s clamping plates

Postby Jackonicko » Sun 07.06.2009, 14:39

1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7, Nige (+fasteners + P&P)
8, Nige (+fasteners + P&P)
9, Gazza (+fasteners + P&P)
10, Dico (+fasteners + P&P)
11, Blacknight (+fasteners + P&P)
12, John_W (+fasteners + P&P)
13, AndyT (+fasteners + P&P)
14, mvf906 (+fasteners + P&P)
15, Enright (+fasteners)
16, Discovery (+fasteners + P&P)
17, Jackonicko (+fasteners + P&P)
Jackonicko
 
Top

Re: Wheelarch liner - front edge s/s clamping plates

Postby router » Mon 08.06.2009, 21:16

1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7, Nige (+fasteners + P&P)
8, Nige (+fasteners + P&P)
9, Gazza (+fasteners + P&P)
10, Dico (+fasteners + P&P)
11, Blacknight (+fasteners + P&P)
12, John_W (+fasteners + P&P)
13, AndyT (+fasteners + P&P)
14, mvf906 (+fasteners + P&P)
15, Enright (+fasteners)
16, Discovery (+fasteners + P&P)
17, Jackonicko (+fasteners + P&P)
18, Router (+fasteners + P&P)
User avatar
router
Enthusiast
 
Posts: 187
Joined: Fri 01.06.2007, 11:28
Location: Sheffield
Top

Re: Wheelarch liner - front edge s/s clamping plates

Postby markv » Mon 08.06.2009, 22:22

1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7, Nige (+fasteners + P&P)
8, Nige (+fasteners + P&P)
9, Gazza (+fasteners + P&P)
10, Dico (+fasteners + P&P)
11, Blacknight (+fasteners + P&P)
12, John_W (+fasteners + P&P)
13, AndyT (+fasteners + P&P)
14, mvf906 (+fasteners + P&P)
15, Enright (+fasteners)
16, Discovery (+fasteners + P&P)
17, Jackonicko (+fasteners + P&P)
18, Router (+fasteners + P&P)
19, markv (+fasteners [poss. + P&P])
Regards

Mark/.
User avatar
markv
God
 
Posts: 926
Joined: Sun 28.05.2006, 15:57
Location: Nottingham, UK
Top
Next
Post a reply

Return to Group Buys

Who is online

Users browsing this forum: No registered users and 4 guests

© 1998 – 2026 Lotus Elan Central. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group