Page 1 of 3
Wheelarch liner - front edge s/s clamping plates **CLOSED**
Posted:
Sun 31.05.2009, 17:57by paulwatkins
Guys,
Geoff recently asked me about obtaining a set of stainless steel clamping plates for the front edge of the front wheelarch liners, where they fix to the fibreglass undertray. (Geoff, if you've got a picture, could you please post it up?). If your wheelarch liners are anything like mine, the leading edge has seen better days, and the front fixings are not too clever. This plate will clamp the liner across its span
I went to see the fabricator on friday, and he will be happy to produce them for us.
The clamp plates will be £5.00 for a set.(2no)
The fasteners will be £2.00 (this is for rubber rawl nuts with s/s machine screws and s/s washers (4no), to replace the plastic plug and self-tapper arrangement)
Postage will be £2.00 ish(guess)
Anyone else interested in a set if its a go-er?
1, paulwatkins
2,
3,
4,
5,
6,
7,
8,
9,
10,
Re: Wheelarch liner - front edge s/s clamping plates
Posted:
Sun 31.05.2009, 18:14by GeoffSmith
1, paulwatkins
2, Geoff (no fasteners)
3,
4,
5,
6,
7,
8,
9,
10,
Re: Wheelarch liner - front edge s/s clamping plates
Posted:
Sun 31.05.2009, 21:24by saska
GeoffSmith wrote:1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4,
5,
6,
7,
8,
9,
10,
Re: Wheelarch liner - front edge s/s clamping plates
Posted:
Sun 31.05.2009, 21:31by M100_DMM
I'm in.
1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 (+fasteners & P+P)
5,
6,
7,
8,
9,
10,
Re: Wheelarch liner - front edge s/s clamping plates
Posted:
Sun 31.05.2009, 21:43by GeoffSmith
Just so you know - I made these plates out of aluminium last year because the leading edge of my liner was drooping badly (and being made worse by collecting the passing wind no doubt) however when I took one off to measure it up for Paul, the liner has recovered well.
Re: Wheelarch liner - front edge s/s clamping plates
Posted:
Mon 01.06.2009, 07:26by BFG in the BRG
do you know, I still haven't got a clue which bit this is - I'll have a look next time I'm fiddling with the BRG
.
However needless to say, this is a group buy and I never could resist one
I'm in - many thanks
1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6,
7,
8,
9,
10,
Re: Wheelarch liner - front edge s/s clamping plates
Posted:
Mon 01.06.2009, 07:46by woody
Count me in again - many thanks
1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7,
8,
9,
10,
Cheers
Re: Wheelarch liner - front edge s/s clamping plates
Posted:
Mon 01.06.2009, 09:04by Nige
Sounds very sensible, I'm in for both cars.
1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7, Nige (+fasteners + P&P)
8, Nige (+fasteners + P&P)
9,
10,
Cheers
Re: Wheelarch liner - front edge s/s clamping plates
Posted:
Mon 01.06.2009, 10:33by Gazza
1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7, Nige (+fasteners + P&P)
8, Nige (+fasteners + P&P)
9, Gazza (+fasteners + P&P)
10,
Cheers
Re: Wheelarch liner - front edge s/s clamping plates
Posted:
Mon 01.06.2009, 15:18by Dico
I've no idea what they are either
1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7, Nige (+fasteners + P&P)
8, Nige (+fasteners + P&P)
9, Gazza (+fasteners + P&P)
10, Dico (+fasteners + P&P)
Cheers
Re: Wheelarch liner - front edge s/s clamping plates
Posted:
Mon 01.06.2009, 15:37by rip
Dico wrote:I've no idea what they are either
A group buy. All you need to know.
Re: Wheelarch liner - front edge s/s clamping plates
Posted:
Mon 01.06.2009, 15:52by blacknight
Yes please
Cheers
Iain
Re: Wheelarch liner - front edge s/s clamping plates
Posted:
Mon 01.06.2009, 19:57by John_W
Dico wrote:I've no idea what they are either
Dico,
Just think of them being like Pot Noodle. Before they invented it, you didn't know you needed it. (Except Geoff's stuff isn't likely to make you
)
1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7, Nige (+fasteners + P&P)
8, Nige (+fasteners + P&P)
9, Gazza (+fasteners + P&P)
10, Dico (+fasteners + P&P)
11, Blacknight (+fasteners + P&P)
12, John_W (+fasteners + P&P)
John
Re: Wheelarch liner - front edge s/s clamping plates
Posted:
Tue 02.06.2009, 18:35by AndyT
1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7, Nige (+fasteners + P&P)
8, Nige (+fasteners + P&P)
9, Gazza (+fasteners + P&P)
10, Dico (+fasteners + P&P)
11, Blacknight (+fasteners + P&P)
12, John_W (+fasteners + P&P)
13, AndyT (+fasteners + P&P)
Re: Wheelarch liner - front edge s/s clamping plates
Posted:
Wed 03.06.2009, 11:44by mvf906
1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7, Nige (+fasteners + P&P)
8, Nige (+fasteners + P&P)
9, Gazza (+fasteners + P&P)
10, Dico (+fasteners + P&P)
11, Blacknight (+fasteners + P&P)
12, John_W (+fasteners + P&P)
13, AndyT (+fasteners + P&P)
14, mvf906 (+fasteners + P&P)
Re: Wheelarch liner - front edge s/s clamping plates
Posted:
Wed 03.06.2009, 22:33by Enright
1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7, Nige (+fasteners + P&P)
8, Nige (+fasteners + P&P)
9, Gazza (+fasteners + P&P)
10, Dico (+fasteners + P&P)
11, Blacknight (+fasteners + P&P)
12, John_W (+fasteners + P&P)
13, AndyT (+fasteners + P&P)
14, mvf906 (+fasteners + P&P)
15, Enright (+fasteners)
If poss I'll take mine with my clamping plates.
Re: Wheelarch liner - front edge s/s clamping plates
Posted:
Sun 07.06.2009, 13:29by discovery
Please add me to the list for clamping plates+fasteners+p&p. Cheers
Re: Wheelarch liner - front edge s/s clamping plates
Posted:
Sun 07.06.2009, 14:39by Jackonicko
1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7, Nige (+fasteners + P&P)
8, Nige (+fasteners + P&P)
9, Gazza (+fasteners + P&P)
10, Dico (+fasteners + P&P)
11, Blacknight (+fasteners + P&P)
12, John_W (+fasteners + P&P)
13, AndyT (+fasteners + P&P)
14, mvf906 (+fasteners + P&P)
15, Enright (+fasteners)
16, Discovery (+fasteners + P&P)
17, Jackonicko (+fasteners + P&P)
Re: Wheelarch liner - front edge s/s clamping plates
Posted:
Mon 08.06.2009, 21:16by router
1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7, Nige (+fasteners + P&P)
8, Nige (+fasteners + P&P)
9, Gazza (+fasteners + P&P)
10, Dico (+fasteners + P&P)
11, Blacknight (+fasteners + P&P)
12, John_W (+fasteners + P&P)
13, AndyT (+fasteners + P&P)
14, mvf906 (+fasteners + P&P)
15, Enright (+fasteners)
16, Discovery (+fasteners + P&P)
17, Jackonicko (+fasteners + P&P)
18, Router (+fasteners + P&P)
Re: Wheelarch liner - front edge s/s clamping plates
Posted:
Mon 08.06.2009, 22:22by markv
1, paulwatkins
2, Geoff (no fasteners)
3, Saska (+fasteners +P&P)
4, DMM_M100 1(+fasteners +P&P)
5, BFG in the BRG (+fasteners +P&P)
6, Woody (+fasteners)
7, Nige (+fasteners + P&P)
8, Nige (+fasteners + P&P)
9, Gazza (+fasteners + P&P)
10, Dico (+fasteners + P&P)
11, Blacknight (+fasteners + P&P)
12, John_W (+fasteners + P&P)
13, AndyT (+fasteners + P&P)
14, mvf906 (+fasteners + P&P)
15, Enright (+fasteners)
16, Discovery (+fasteners + P&P)
17, Jackonicko (+fasteners + P&P)
18, Router (+fasteners + P&P)
19, markv (+fasteners [poss. + P&P])