M100 Rear light covers - Remanufacture
Hello all
As proposed by Dave (Clemo), am moving the Final List - formerly in Hood/Top, Bodywork & Fittings (See link below) - to the Group Buys section since we have finally reached our minimum required quantity of fifteen (15) pairs (slightly more in fact). Perhaps this will prompt other potential buyers.
I will be proposing a closure date shortly. After this, we will proceed - subject to finalising shipment/delivery/packaging - with the downpayment, the transfer of funds to the manufacturer/supplier who in turn will start production. Estimated production time 2 months, subject to latter's holiday period. On completion of the production run, the balance will have to be paid prior to goods being shipped.
The Final List - firm orders - on 08/05/2019 was as follows :
1. Richard K 03/05 1 pair
2. John_W 02/05 1 pair
3. LRS7 02/05 1 pair
4. M100turboFR (David) 03/05 1 pair
5. Brit-Car-Nut 03/05 1 pair
6. uk08462 (Simon H) 1 pair (26/04)
7. Burble61 (Chris A) 1 pair
8.Morris DennyMorris 1 pair 04/05
9.danevansgolf 1RH side drivers side
10.Sivaslian Serge, 1 pair.
11. Wayne 1 unit RH side
12. gwigzee 1 pair
13. Dunnlor 1 pair
14. Miller 1 pair
15. TD2 1 pair
16. Clemo 1 pair
17. Clemo 1 more pair
18.French_elans 1 pair
19. Muley (Jim) 1 pair ~ firm order
20. Steve Mathews
i.e. 17 pairs + 2 RH side covers (Danevansgolf, Wayne) + possibility of an additional pair (Clemo).
Thank you all.
Trust you're in agreement with this.
David (M100TurboFR)
viewtopic.php?f=30&t=27285&p=351498#p351498
Last post of the above link - 09/05/2019 See below
Dave (Clemo) Hi
Indeed, the majority doubtless hold the same view - i.e. no real urgency. However we'll have to cut off this initial list fairly soon. Indeed, by the time we obtain all the downpayments and transfer the sum and the manufacturer/supplier starts production we'll be into August/September (depending on his holiday period - sometimes 1 month). We do have the minimum required quantity of 15.
BUT there still remains the problem of shipment (post, courier, other...) to be solved. I'm currently working on this myself, with BCN (John) and of course with the supplier. Hopefully we'll get there.
Before we can move forward with this Group Buy we must first settle this problem and find a valid, acceptable and fair solution with which everyone must be in agreement. I'm open to all suggestions and would appreciate your help.
No objection to transferring this "final list" to the Group Buy section. Might be the best idea. Any voluteers? Or explain the procedure to me. Is it just Copy & Paste?
A 2nd Group Buy could be launched for any new "takers". You know better than me.
David
As proposed by Dave (Clemo), am moving the Final List - formerly in Hood/Top, Bodywork & Fittings (See link below) - to the Group Buys section since we have finally reached our minimum required quantity of fifteen (15) pairs (slightly more in fact). Perhaps this will prompt other potential buyers.
I will be proposing a closure date shortly. After this, we will proceed - subject to finalising shipment/delivery/packaging - with the downpayment, the transfer of funds to the manufacturer/supplier who in turn will start production. Estimated production time 2 months, subject to latter's holiday period. On completion of the production run, the balance will have to be paid prior to goods being shipped.
The Final List - firm orders - on 08/05/2019 was as follows :
1. Richard K 03/05 1 pair
2. John_W 02/05 1 pair
3. LRS7 02/05 1 pair
4. M100turboFR (David) 03/05 1 pair
5. Brit-Car-Nut 03/05 1 pair
6. uk08462 (Simon H) 1 pair (26/04)
7. Burble61 (Chris A) 1 pair
8.Morris DennyMorris 1 pair 04/05
9.danevansgolf 1RH side drivers side
10.Sivaslian Serge, 1 pair.
11. Wayne 1 unit RH side
12. gwigzee 1 pair
13. Dunnlor 1 pair
14. Miller 1 pair
15. TD2 1 pair
16. Clemo 1 pair
17. Clemo 1 more pair
18.French_elans 1 pair
19. Muley (Jim) 1 pair ~ firm order
20. Steve Mathews
i.e. 17 pairs + 2 RH side covers (Danevansgolf, Wayne) + possibility of an additional pair (Clemo).
Thank you all.
Trust you're in agreement with this.
David (M100TurboFR)
viewtopic.php?f=30&t=27285&p=351498#p351498
Last post of the above link - 09/05/2019 See below
Dave (Clemo) Hi
Indeed, the majority doubtless hold the same view - i.e. no real urgency. However we'll have to cut off this initial list fairly soon. Indeed, by the time we obtain all the downpayments and transfer the sum and the manufacturer/supplier starts production we'll be into August/September (depending on his holiday period - sometimes 1 month). We do have the minimum required quantity of 15.
BUT there still remains the problem of shipment (post, courier, other...) to be solved. I'm currently working on this myself, with BCN (John) and of course with the supplier. Hopefully we'll get there.
Before we can move forward with this Group Buy we must first settle this problem and find a valid, acceptable and fair solution with which everyone must be in agreement. I'm open to all suggestions and would appreciate your help.
No objection to transferring this "final list" to the Group Buy section. Might be the best idea. Any voluteers? Or explain the procedure to me. Is it just Copy & Paste?
A 2nd Group Buy could be launched for any new "takers". You know better than me.
David