Mildew on the inside of my hood!

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Mildew on the inside of my hood!

Postby GPT27 » Thu 11.01.2007, 14:57

As the subject suggest I have a layer of mildew on the inside of my hood (edit: hood as in roof not bonnet), it kind of looks like I have a custom white headliner.

Is there a tried and tested way to get rid of it or does anyone have any tips/suggestions?

I haven't touched it yet for fear of just smearing it all around and making a mess.

Cheers guys.
GPT27
Newbie
 
Posts: 47
Joined: Fri 10.02.2006, 21:03
Location: Frensham, Surrey. 1992 BRG Elan N/A.

Postby clemo » Thu 11.01.2007, 15:40

i guess the car has been stood up for a while or has had been left somwhere dark? maybe been put away wet with a cover on it?

just clean it off with a cloth and soapy water regular use should help it stay clean...
quite a few elans suffer from this in the british winter .. damp cold lack of sun...

oh bugger roll on the summer .

clemo
fellow n/a owner
Jim Clark S2 - 1/12. The one with the Yellow spoke wheels . No 613 on dash (pushed in to factory in wrong order 615 on tub)
User avatar
clemo
LEC Administrator
 
Posts: 5069
Joined: Mon 21.04.2003, 23:24
Location: TORQUAY Devon. Cream first then Jam obviously.

Postby GPT27 » Fri 12.01.2007, 17:39

Thanks Clemo, I'll give it a go this weekend.

Funny thing is I use the car every day (about 40 miles), I guess I didn't notice it building up.

Roll on Summer x 2
GPT27
Newbie
 
Posts: 47
Joined: Fri 10.02.2006, 21:03
Location: Frensham, Surrey. 1992 BRG Elan N/A.

Postby paulrwebster » Fri 12.01.2007, 18:03

I have been told that Miltons sterilising fluid is quite good, though I haven't tried it so if you do use it, test it on an inconspicuous area first.

I have a mouldy seat that I need to attack this weekend :!:
Image

499 Rubbish posts, Always a fanatic, never a God.
User avatar
paulrwebster
Fanatic
 
Posts: 527
Joined: Sat 28.01.2006, 18:15
Location: Haywards Heath, West Sussex

Postby mikeydude » Fri 12.01.2007, 21:29

Go easy on the Milton..remember it's just bleach that stuff!!
User avatar
mikeydude
Fanatic
 
Posts: 546
Joined: Thu 09.02.2006, 00:26
Location: Rochdale

Postby al » Fri 19.01.2007, 14:41

The Renovo hood treatment ultra proofer has some anti- mold/mildew gubbins in it, might be worth a look ?

I've recently cleaned and re-proofed my hood with it (I bought one of their kits) and I'm pretty impressed.

http://www.renovointernational.com/prod ... ducts.html
User avatar
al
LEC Bit Basher
 
Posts: 544
Joined: Sat 15.04.2006, 15:30
Location: London

Postby Paul Reid » Mon 22.01.2007, 09:46

Please post how you got on and what else you may have found.
I have the same problem.
I think mine has come from leaving the car outside in all this wet weather.

Paul :?
Paul Reid
Newbie
 
Posts: 20
Joined: Sun 19.11.2006, 00:48
Location: Devon

Postby ESM » Tue 23.01.2007, 14:05

Its caused by frequent condensation on the inside of the hood and, in my experience, this usually means you have a leak into the cabin which is keeping some carpet soggy and the interior humidity high. I'd say cleaning will fix the problem in the short term but sorting any leaks would be essential to prevent it coming back.
It takes 43 muscles to frown and 17 to smile, but it doesn't take any to sit on your arse with a blank look on your face.

Click on my WWW link for information on chips and ElanScan.
User avatar
ESM
God
 
Posts: 2441
Joined: Thu 17.04.2003, 10:08


Return to Hood/Top, Bodywork and Fittings

Who is online

Users browsing this forum: No registered users and 8 guests