Cleaning Question

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Cleaning Question

Postby Elanlover » Wed 14.02.2007, 20:11

This is probably the wrong time of the year to ask this but I'm curious none the less. How are people washing/cleaning their tonneaus?

I used Windex on it last time which is undoubtedly not the best solution. A traditional washing is out of the quesiotn unless you want a wet floor. What's everyone else doing?????
I do whatever my Rice Crispies tell me to do
User avatar
Elanlover
Moderator
 
Posts: 3513
Joined: Fri 05.08.2005, 19:11
Location: The Great White North

Postby Doug » Thu 15.02.2007, 06:09

you mean the convertible top?

lightly wet top
soap or simple green on a sponge
rub on gently
hose off gently

:-D
Image
User avatar
Doug
LEC Founder
 
Posts: 7468
Joined: Thu 17.04.2003, 06:43
Location: Oregon Coast, USA

Postby Elanlover » Thu 15.02.2007, 14:03

No, I mean the tonneau (cover) itself. The "lid" under which the roof goes when stored. Its not exposed to the sponge and hose when the roof's up but I find it gets dirty none the less. Hard to wash it without getting the interior wet if you know what I mean. I suppose that careful use of the sponge when the roof is down would work. I just didn't know if someone had some magic technique they could share. :D
I do whatever my Rice Crispies tell me to do
User avatar
Elanlover
Moderator
 
Posts: 3513
Joined: Fri 05.08.2005, 19:11
Location: The Great White North

Postby PaulN » Thu 15.02.2007, 15:37

Errrr A wet cloth? :D
Everything Happens For A Reason!
User avatar
PaulN
Fanatic
 
Posts: 335
Joined: Thu 29.05.2003, 10:49
Location: Midlands

Postby theelanman » Thu 15.02.2007, 16:17

:agree:
wet cloth....or i use the chamois when cleaning it.
I’m normally not a praying man, but if you’re up there, please save me, Superman.
User avatar
theelanman
Moderator
 
Posts: 7296
Joined: Fri 30.04.2004, 15:52
Location: peak district

Postby Doug » Thu 15.02.2007, 19:09

:agree:

yes, after the clay, paint polish and wax job, it holds up real well to use and I would just lift the rear of the convertible top up a bit and wipe with a damp microfiber towel = DONE.
Image
User avatar
Doug
LEC Founder
 
Posts: 7468
Joined: Thu 17.04.2003, 06:43
Location: Oregon Coast, USA

Postby Ekapol » Fri 16.02.2007, 00:06

Pressure wash ... no? :?

I'll share my little secret:
- Drive your Elan on the ramp.
- Make sure the front wheels have nice support, at least a foot higher than the rear wheels.
- Now you can lightly hose down the top tonneau. Notice that the water will magically run off to the back of your Elan.
- Like many Elan projects, you would work faster after some practice.

:-D





Ok.... :)
I usually just wipe it down with a damp micro fiber cloths, and give it a wax (with the top fold down) every once in a while. I dust off that area quite often, basically just try to keep that area clean.
"Do or do not.... there is no try."

“Named must your fear be before banish it you can.” -- Yoda
User avatar
Ekapol
God
 
Posts: 1463
Joined: Mon 19.06.2006, 21:55
Location: Sin City


Return to Hood/Top, Bodywork and Fittings

Who is online

Users browsing this forum: No registered users and 8 guests