Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by SJ » Sat 06.10.2007, 15:07
Due to me being a moron I left the drivers door open the other day whilst the car was on the ramp in the garage. Ramp goes up window goes POP ! What a tit.
So.........I need to know:
Where can I get a window? How much is fitting?
The reason the car was on the ramp was there is a horrible rattling noise coming from the Cam Angle Sensor - would it be best to fit a new one or can this type of problem be addressed?
Thank you in advance for your assistance
SJ
Who wants a ride on my donkey?
-
SJ
- Newbie
-
- Posts: 43
- Joined: Sat 21.07.2007, 17:10
- Location: Horsham
by Dico » Sat 06.10.2007, 19:11
On the ramp for cas inspection ??
I think DaveT 'may' have a window, but he's in the Isle of man for the weekend.
Drop him a PM
Sounds like the bearing in the cas has gone. They are available in the states at a reasonable price. ($100 ? + postage + duty)
Have a look at jimbobs thread in the 'Project' section. I'm sure he posted the part numbers there.
And if you are doing a group buy get me one
Good luck.
4+ hours stuck in a damp bucket seat with a mad Irishman at the wheel - Deep joy!!!!
-

Dico
- Fool Boy Four - Founder
-
- Posts: 3569
- Joined: Mon 01.12.2003, 09:45
- Location: Moderator Manchester
by SJ » Sat 06.10.2007, 19:15
On ramp for general inspection - new brake lines just fitted and was doing oil change.
SJ
Who wants a ride on my donkey?
-
SJ
- Newbie
-
- Posts: 43
- Joined: Sat 21.07.2007, 17:10
- Location: Horsham
by Dico » Sat 06.10.2007, 19:32
Was the information I gave to you of any use?
SJ wrote:On ramp for general inspection - new brake lines just fitted and was doing oil change.
SJ wrote:
The reason the car was on the ramp was there is a horrible rattling noise coming from the Cam Angle Sensor
Ah, must be me being in a picky mood

4+ hours stuck in a damp bucket seat with a mad Irishman at the wheel - Deep joy!!!!
-

Dico
- Fool Boy Four - Founder
-
- Posts: 3569
- Joined: Mon 01.12.2003, 09:45
- Location: Moderator Manchester
by SJ » Sat 06.10.2007, 19:36
Any info is of use Dico - I don't know s**t, you lot are my lifeline!
Frightened of cost on window though
Cheers
SJ
Who wants a ride on my donkey?
-
SJ
- Newbie
-
- Posts: 43
- Joined: Sat 21.07.2007, 17:10
- Location: Horsham
by Dico » Sat 06.10.2007, 19:37
£50 may do it

(plus fitment

??)
Unless he's sold em?
Stevieshag may have one also?
I have a garage full of spare for such eventualities

4+ hours stuck in a damp bucket seat with a mad Irishman at the wheel - Deep joy!!!!
-

Dico
- Fool Boy Four - Founder
-
- Posts: 3569
- Joined: Mon 01.12.2003, 09:45
- Location: Moderator Manchester
by SJ » Sat 06.10.2007, 19:45
I have full SE Torbo as spare at mo but that was the window I broke! Glad it wasn't mine, you'll see it for sale soon I'd imagine - just new hood and an MOT and sort stuck wastegate.
I'll put it on here first rather than e-bay - I rekon about £3k. BRG H plate 99 thousand miles with shoddy re-spray (not that bad)
Fancy it?
SJ
Who wants a ride on my donkey?
-
SJ
- Newbie
-
- Posts: 43
- Joined: Sat 21.07.2007, 17:10
- Location: Horsham
by Dico » Sat 06.10.2007, 19:49
Hmm, 'Mrs Dico do you mind if I have another £3000's worth of spares in the garage?'
Can't see it happening, but its sounds cheap enough

4+ hours stuck in a damp bucket seat with a mad Irishman at the wheel - Deep joy!!!!
-

Dico
- Fool Boy Four - Founder
-
- Posts: 3569
- Joined: Mon 01.12.2003, 09:45
- Location: Moderator Manchester
by SJ » Sat 06.10.2007, 20:01
If you know anyone that needs it get them to send me a message - like I say, minter she isn't but a bit of TLC and you have a £5k car.
Open to offers before I do the bits I intend to.
Regards
SJ
Who wants a ride on my donkey?
-
SJ
- Newbie
-
- Posts: 43
- Joined: Sat 21.07.2007, 17:10
- Location: Horsham
by Sy V » Sun 07.10.2007, 06:17
SJ
Later today, I'm delivering a car to Surpherphil in High Wycombe.
In the boot are two side windows - already removed.
You might want to approach him.
FYI windows come in two tints - Greeen and brown (bronze). These are green - but you can hardly tell them apart.
Note: I have just locked your identical thread in the Problems area. Duplicate threads cause nothing but problems. I've copied my reply into this one, above.
Talk and song from tongues of lilting grace, sounds caress my ears but not a word I heard could I relay, the story was quite clear - Robert PlantIn Respectful Memory - 21st March 1959 - 14th February 2016
-

Sy V
- LEC Godfather
-
- Posts: 5794
- Joined: Mon 21.04.2003, 07:06
- Location: Lydiate Ash, Bromsgrove, Worcestershire.
by Specky » Sun 07.10.2007, 11:14
Sy V wrote:FYI windows come in two tints - Greeen and brown (bronze). These are green - but you can hardly tell them apart.
Unless you have a mix and match fitted to your car..
TTFN
If you have a problem, if no one else can help, and if you can find them, maybe you can hire... The N/A-Team.
-

Specky
- Moderator
-
- Posts: 5982
- Joined: Sun 07.09.2003, 23:19
- Location: Swindon
by GeoffSmith » Fri 12.10.2007, 16:23
The hall effect sensor HES is the electrical sensor inside the CAS. It sounds like SJ has a problem with the bearings in his CAS so, unfortunately, replacing the HES will not solve his problem.
Calypso Red S2 #417
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
-

GeoffSmith
- Kitty Fiddler
-
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
-
Return to Doors and Windows
Who is online
Users browsing this forum: No registered users and 3 guests