Lotus Elan Central

Everything M100

Skip to content

upgraded turbos, what have you all done?

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Post a reply

Postby CRAMBURY RS » Thu 10.07.2008, 21:12

ailwyn wrote:Just mark it as a prototype auto part. Put a low value >$50 and they won't bother.

dude, you're car is purple! LOL...(sigh) just kidding man!

i stated the $100 value so that it would be insured for as much and it could be replaced if lost (b/c it's shipping internationally it gets the first 100 dollars free in insurance).

there hasn't been an issue with a lost adapter to the UK yet, so if you are OK with me dodging the value i'm ok with it.

1 Ailwyn PAID!!! (GOT THE ADDRESS FOR LGM...pst! don't tell her i'm stocking her :p)
2 Ailwyn PAID!!!
3 Abmunro PAID!!!
4 MattDon CONFIRMED, payment coming
5 FINAL SLOT FOLKS!!!
6 MINE!!!
User avatar
CRAMBURY RS
Enthusiast
 
Posts: 187
Joined: Tue 03.01.2006, 01:23
Location: usa, washington
Top

Postby RichardK » Fri 11.07.2008, 16:13

Sorry folks - been away with the kids for four days.....

1 Ailwyn PAID!!! (GOT THE ADDRESS FOR LGM...pst! don't tell her i'm stocking her :p)
2 Ailwyn PAID!!!
3 Abmunro PAID!!!
4 MattDon CONFIRMED, payment coming
5 RichardK COnfirmed , Payment coming
6 MINE!!!


R
CAPETOWN - RED 92 SE: V5 and LGM Turbo Installed
NEW ORLEANS - YELLOW 91 FED. Stock.
User avatar
RichardK
Fanatic
 
Posts: 375
Joined: Sat 07.07.2007, 12:25
Location: New Orleans & Capetown
Top

Postby CRAMBURY RS » Mon 14.07.2008, 15:41

RichardK wrote:Sorry folks - been away with the kids for four days.....

1 Ailwyn PAID!!! (GOT THE ADDRESS FOR LGM...pst! don't tell her i'm stocking her :p)
2 Ailwyn PAID!!!
3 Abmunro PAID!!!
4 MattDon CONFIRMED, payment coming
5 RichardK COnfirmed , Payment coming
6 MINE!!!


R

CHECK!!!
i've been a little on the busy side with weddings and my own PITA car. all adapters will be shipped by week's end...PROMISE :P
User avatar
CRAMBURY RS
Enthusiast
 
Posts: 187
Joined: Tue 03.01.2006, 01:23
Location: usa, washington
Top

Postby Ekapol » Wed 16.07.2008, 07:13

RichardK wrote:Can I take that third spot?
1 Aiwyn
2 Dico
3 Richard K...



I ordered the exhaust manifolds from Dave Bean today. Will be shipped to me in few days. Will send you invoice once I know the total. (share shipping cost between 3 manifolds)

Richard: Yours would be no grinding but jet-hotted correct?

What about Ailwyn and Dico?
Last edited by Ekapol on Thu 07.08.2008, 22:55, edited 2 times in total.
"Do or do not.... there is no try."

“Named must your fear be before banish it you can.” -- Yoda
User avatar
Ekapol
God
 
Posts: 1463
Joined: Mon 19.06.2006, 21:55
Location: Sin City
Top

Postby ailwyn » Wed 16.07.2008, 08:56

Ekapol,

Mine's to be ported, Dico's too IIRC.

I'd like to get it JH coated, and pending his own response, I'm sure Paul would be up for that too.

Thanks

Ailwyn
ailwyn
Forum Member
 
Posts: 3361
Joined: Tue 09.08.2005, 20:45
Top

Postby CRAMBURY RS » Wed 16.07.2008, 15:31

RichardK wrote:Sorry folks - been away with the kids for four days.....

1 Ailwyn PAID!!! (GOT THE ADDRESS FOR LGM...pst! don't tell her i'm stocking her :p)
2 Ailwyn PAID!!!
3 Abmunro PAID!!!
4 MattDon CONFIRMED, payment coming
5 OPEN...!!!
6 MINE!!!


R


Richard already got his in the first set sent out. But because he was on tour in Africa, he didn't remember...and neither did I...that he had already paid for one :D

so then, one still available. i have Friday off and items will be shipped out that morning. sorry for the delay, but not like you have anything to bolt up just yet :wink:
User avatar
CRAMBURY RS
Enthusiast
 
Posts: 187
Joined: Tue 03.01.2006, 01:23
Location: usa, washington
Top

Postby RichardK » Thu 17.07.2008, 15:10

Thanks Rafael, way too much jungle juice!

Ekapol - that's right, no porting for me, all part of the project....

CHeers

R
CAPETOWN - RED 92 SE: V5 and LGM Turbo Installed
NEW ORLEANS - YELLOW 91 FED. Stock.
User avatar
RichardK
Fanatic
 
Posts: 375
Joined: Sat 07.07.2007, 12:25
Location: New Orleans & Capetown
Top

Postby CRAMBURY RS » Fri 18.07.2008, 00:10

ok, Matthew and Anthony's adapters went out this morning as did 2 adapters to LGM on behalf of Ailwyn for porting. I got them out a day ahead of planned :wink:

now to start gathering my own parts 8)
User avatar
CRAMBURY RS
Enthusiast
 
Posts: 187
Joined: Tue 03.01.2006, 01:23
Location: usa, washington
Top

Postby lotusgirlmarie » Fri 18.07.2008, 02:46

Coolio!! I think Ekapol has the manifolds as well. Project is deffinitely moving now!!!
Must....................Go...............Faster
User avatar
lotusgirlmarie
Goddess
 
Posts: 1434
Joined: Thu 14.07.2005, 07:35
Location: Earth or there abouts
Top

Postby Dico » Fri 18.07.2008, 11:03

Yes Ekkers, if possible I would like my manifold Jethot coated, and ported too (Cheers Ailwyn :wink: )

I'm sooo going to have to track this car now, and show them Elises (and Monty) a thing or two!
4+ hours stuck in a damp bucket seat with a mad Irishman at the wheel - Deep joy!!!!
User avatar
Dico
Fool Boy Four - Founder
 
Posts: 3569
Joined: Mon 01.12.2003, 09:45
Location: Moderator Manchester
Top

Postby Ekapol » Fri 18.07.2008, 16:56

Roger that. Note taken :-)
"Do or do not.... there is no try."

“Named must your fear be before banish it you can.” -- Yoda
User avatar
Ekapol
God
 
Posts: 1463
Joined: Mon 19.06.2006, 21:55
Location: Sin City
Top

Postby Monty » Fri 18.07.2008, 16:58

Dico wrote:I'm sooo going to have to track this car now, and show them Elises (and Monty) a thing or two!


:smt044

Yeah rite, if you get anymore stonechips on the garage queen you`ll be :cry:
User avatar
Monty
Chunder King!
 
Posts: 7977
Joined: Sun 11.01.2004, 22:32
Location: Leeds
Top

Postby CRAMBURY RS » Fri 18.07.2008, 23:56

Monty wrote:
Dico wrote:I'm sooo going to have to track this car now, and show them Elises (and Monty) a thing or two!


:smt044

Yeah rite, if you get anymore stonechips on the garage queen you'll be :cry:

that's why you go out an buy that static cling plastic. i see it on vetts and mustangs at the x-cross events. saves a lot of paint jobs :wink:
User avatar
CRAMBURY RS
Enthusiast
 
Posts: 187
Joined: Tue 03.01.2006, 01:23
Location: usa, washington
Top

Postby CRAMBURY RS » Mon 28.07.2008, 21:29

can a brotha get an Amen to a received adapter?!?! let the heavens know it's in yo hands!!!
User avatar
CRAMBURY RS
Enthusiast
 
Posts: 187
Joined: Tue 03.01.2006, 01:23
Location: usa, washington
Top

turbo coolant pipe routing - T2560

Postby tigerdog » Wed 30.07.2008, 22:33

I see from Ekapol's engine compartment in the photo gallery, LGM's coolant return pipe loops up above the valve cover gasket then down to the thermostat houseing. Smaug's is routed the same way. When I shut him off, I can very clearly hear bubbling of boiling coolant in this pipe. Does anyone else (Ekapol? LGM?) hear this?

It looks like the stadard LotIsuzu return stays almost level with the thermostat. I'm wondering if our routing creates an unpurgeable section which will hamper turbo cooling. Thoughts?
User avatar
tigerdog
God
 
Posts: 2715
Joined: Tue 20.03.2007, 09:07
Location: San Diego, CA, USA
Top

Postby lotusgirlmarie » Thu 31.07.2008, 19:11

Nope. No bubbling, perkalating or churning. The Aeroquip hose ends keep everything bretty low profile. Just out of curiosity I checked the lines for coolant flow as I've been working on the downpipes yesterday and today. Coolant is flowing pretty well through the lines. Now I need to go clean up my floor :roll: Back to cutting and welding.
Must....................Go...............Faster
User avatar
lotusgirlmarie
Goddess
 
Posts: 1434
Joined: Thu 14.07.2005, 07:35
Location: Earth or there abouts
Top

Postby Ekapol » Thu 07.08.2008, 22:54

RichardK wrote:Can I take that third spot?
1 Aiwyn
2 Dico
3 Richard K...


Good news. They might have 3 more exhaust manifolds coming in stock. Don't know the exact date yet.

I think I will take this group buy to LGM Turbo Kit Thread
4. MattRI
5.
6.
"Do or do not.... there is no try."

“Named must your fear be before banish it you can.” -- Yoda
User avatar
Ekapol
God
 
Posts: 1463
Joined: Mon 19.06.2006, 21:55
Location: Sin City
Top

Postby CRAMBURY RS » Thu 07.08.2008, 23:23

Ekapol wrote:
RichardK wrote:Can I take that third spot?
1 Aiwyn
2 Dico
3 Richard K...


I think I will take this group buy to LGM Turbo Kit Thread

you do that...:p

btw Ekkers, could you get to me on your pricing for the turbo? thanks, Cram/Rafael.
User avatar
CRAMBURY RS
Enthusiast
 
Posts: 187
Joined: Tue 03.01.2006, 01:23
Location: usa, washington
Top

Postby Ekapol » Fri 08.08.2008, 00:51

CRAMBURY RS wrote:btw Ekkers, could you get to me on your pricing for the turbo? thanks, Cram/Rafael.


Sure, no problem, but I think the price is already on the thread linking out from my post above. You might want to click on the green thingy there ;-)

Or here: LGM Turbo Kit Thread

Cheers Rafael,
"Do or do not.... there is no try."

“Named must your fear be before banish it you can.” -- Yoda
User avatar
Ekapol
God
 
Posts: 1463
Joined: Mon 19.06.2006, 21:55
Location: Sin City
Top

Postby CRAMBURY RS » Fri 08.08.2008, 08:06

Ekapol wrote:
CRAMBURY RS wrote:btw Ekkers, could you get to me on your pricing for the turbo? thanks, Cram/Rafael.


Sure, no problem, but I think the price is already on the thread linking out from my post above. You might want to click on the green thingy there ;-)

Or here: LGM Turbo Kit Thread

Cheers Rafael,

$850 plus tax...check!
User avatar
CRAMBURY RS
Enthusiast
 
Posts: 187
Joined: Tue 03.01.2006, 01:23
Location: usa, washington
Top
PreviousNext
Post a reply

Return to Turbos, Boost, and Intakes

Who is online

Users browsing this forum: AhrefsBot and 1 guest

© 1998 – 2026 Lotus Elan Central. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group