Custom mud flaps

[GeoffSmith]

this was the last list I knew of

which was over a year old which was why I thought it was better to start a new one of those who had recently expressed an interest.

1. Geoff F&R black
2. Don.Hasi ??? black
3. daveA F&R black
4. theelanman ??? noir
5. dapinky ??? black
6. mrsdapinky ??? black
7. gee0 ??? black
8. chris.t F black
9. Gareth ??? black

[dapinky]

Geoff,

Have you been eating them funny little mushrooms again??????

Where the heck did your list come from????

Why have i been attached to this fictional new batch (Angie needs a set, I've already got some!)

Okay, just to try and clarify, (and to be sensible at the same time), i need ONE set in black, please, for Angies car.

[GeoffSmith]

Have you been eating them funny little mushrooms again??????

Prescription only mate.

Where the heck did your list come from????

I'd like pale blue, perhaps edging towards a mid turquoise (but NOT medina green), with a Lotus logo highlighted in a red/pink accent - a shade or 2 lighter than calypso .
If it could have a graduated border starting at Dark Purple (something like 'Autumn Nights' from the 2005 B & Q paint chart), and flowing over a 1 1/2" 'blend' into a bright cerise ('Lucious Lips' is the closest i can get on the Rimmel nail polish chart i have for reference) that would be great.......

From the two sentences loosely based on the colours of your cars! Maybe I misread as I was retching so bad half way through!

[GeoffSmith]

1. Geoff F&R black
2. Don.Hasi ??? black
3. daveA F&R black
4. theelanman ??? noir
5. mrsdapinkyF&R black
6. gee0 ??? black
7. chris.t F black
8. Gareth ??? black

[Nobby]

1. Geoff F&R black
2. Don.Hasi ??? black
3. daveA F&R black
4. theelanman ??? noir
5. mrsdapinkyF&R black
6. gee0 ??? black
7. chris.t F black
8. Gareth ??? black
9. Nobby F&R black

[Gee0]

1. Geoff F&R black
2. Don.Hasi ??? black
3. daveA F&R black
4. theelanman ??? noir
5. mrsdapinkyF&R black
6. gee0 F & R black
7. chris.t F black
8. Gareth ??? black
9. Nobby F&R black

[Don.Hasi]

1. Geoff F&R black
2. Don.Hasi F black
3. daveA F&R black
4. theelanman ??? noir
5. mrsdapinkyF&R black
6. gee0 F & R black
7. chris.t F black
8. Gareth ??? black
9. Nobby F&R black

[daveA]

theelanman worte :- come in number 3......I think youre a number 10 now


10 was okay ... but 3 better better put my reading specs on

[Avonvilla]

1. Geoff F&R black
2. Don.Hasi F black
3. daveA F&R black
4. theelanman ??? noir
5. mrsdapinkyF&R black
6. gee0 F & R black
7. chris.t F black
8. Gareth ??? black
9. Nobby F&R black
10 Avonvilla F&R Black

[paza1]

1. Geoff F&R black
2. Don.Hasi F black
3. daveA F&R black
4. theelanman ??? noir
5. mrsdapinkyF&R black
6. gee0 F & R black
7. chris.t F black
8. Gareth ??? black
9. Nobby F&R black
10 Avonvilla F&R Black
11. Paza1 still interested (F (maybe R) in black) but is there a definite price per pair yet?

[ailwyn]

G.

Is this going to be a one-time run or will the be the potential to buy "off the shelf" in the future?

Ailwyn

??

[GeoffSmith]

is there a definite price per pair yet?

[theelanman]

Im still waiting for the 3 companies to come back to me with prices...
I'll ring em again this afternoon

[theelanman]

G.

Is this going to be a one-time run or will the be the potential to buy "off the shelf" in the future?

Ailwyn

not sure yet....I think its going to depend on qty....

[theelanman]

ok...just an update
a full set of front and rears will be £30.......providing we get 25 sets made.....
also depending on the material we go for.......
Im still waiting for the final specs but 3mm thick Black E.P.D.M is the current spec

EPDM rubber (ethylene propylene diene M-class rubber) is an elastomer which is characterized by wide range of applications.The E refers to Ethylene, P to Propylene, D to diene and M refers to its classification in ASTM standard D-1418. The “M” class includes rubbers having a saturated chain of the polymethylene type. The diene(s) currently used in the manufacture of EPDM rubbers are DCPD (dicyclopentadiene), ENB (ethylidene norbornene) and VNB (vinyl norbornene).

The ethylene content is around 45% to 75%. The higher the ethylene content the higher the loading possibilities of the polymer, better mixing and extrusion. During peroxide curing these polymers give a higher crosslink density compared with their amorphous counterpart. The amorphous polymer are also excellent in processing. This is very much influenced by their molecular structure. The diene content can vary between 2.5wt% up to 12wt%



Im also looking at a laminate but depending on it composition depend on its price.....

however...EPDM....bendy but hard wearing...and shouldnt fade

everyone still in???....

[Gee0]

EPDM rubber (ethylene propylene diene M-class rubber) is an elastomer which is characterized by wide range of applications.The E refers to Ethylene, P to Propylene, D to diene and M refers to its classification in ASTM standard D-1418. The “M” class includes rubbers having a saturated chain of the polymethylene type. The diene(s) currently used in the manufacture of EPDM rubbers are DCPD (dicyclopentadiene), ENB (ethylidene norbornene) and VNB (vinyl norbornene).

The ethylene content is around 45% to 75%. The higher the ethylene content the higher the loading possibilities of the polymer, better mixing and extrusion. During peroxide curing these polymers give a higher crosslink density compared with their amorphous counterpart. The amorphous polymer are also excellent in processing. This is very much influenced by their molecular structure. The diene content can vary between 2.5wt% up to 12wt%

Is this what you have been doing with all your spare time,

While the rest of us surf pron sites G has been back to "RUBBER SCHOOL"



BTW Yip still in

[ab2cv]

Still in.....

1. Geoff F&R black
2. Don.Hasi F black
3. daveA F&R black
4. theelanman ??? noir
5. mrsdapinkyF&R black
6. gee0 F & R black
7. chris.t F black
8. Gareth ??? black
9. Nobby F&R black
10 Avonvilla F&R Black
11. Paza1 still interested (F (maybe R) in black) but is there a definite price per pair yet?
12. Alan (ab2cv) F & R black

[Gareth]

Still in.....

1. Geoff F&R black
2. Don.Hasi F black
3. daveA F&R black
4. theelanman ??? noir
5. mrsdapinkyF&R black
6. gee0 F & R black
7. chris.t F black
8. Gareth black : Yes Please
9. Nobby F&R black
10 Avonvilla F&R Black
11. Paza1 still interested (F (maybe R) in black) but is there a definite price per pair yet?
12. Alan (ab2cv) F & R black

[dapinky]

Still in.....

1. Geoff F&R black
2. Don.Hasi F black
3. daveA F&R black
4. theelanman ??? noir
5. mrsdapinkyF&R black = still in at £30 a set
6. gee0 F & R black
7. chris.t F black
8. Gareth black : Yes Please
9. Nobby F&R black
10 Avonvilla F&R Black
11. Paza1 still interested (F (maybe R) in black) but is there a definite price per pair yet?
12. Alan (ab2cv) F & R black

[paza1]

Gareth,
Will they be ready for Donni?

Still in.....

1. Geoff F&R black
2. Don.Hasi F black
3. daveA F&R black
4. theelanman ??? noir
5. mrsdapinkyF&R black = still in at £30 a set
6. gee0 F & R black
7. chris.t F black
8. Gareth black : Yes Please
9. Nobby F&R black
10 Avonvilla F&R Black
11. Paza1 (F & R in black) in at £30 a set
12. Alan (ab2cv) F & R black