Lotus Elan Central

Everything M100

Skip to content

Head Light Motor Rebuilding

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Post a reply

Postby Elanlover » Sat 30.09.2006, 22:38

Doc Fizzix wrote:Ok, I am wrong. Was working on the car today (removing the oil cooler) and inside my fenders are also white. My bad


That's ok. If you had the only TRUE color every Lotus should be (white, of course) you'd never have a problem like this at all. :-D
User avatar
Elanlover
Moderator
 
Posts: 3513
Joined: Fri 05.08.2005, 19:11
Location: The Great White North
Top

Postby Doc Fizzix » Sun 01.10.2006, 04:23

Elanlover wrote: If you had the only TRUE color every Lotus should be (white, of course) ... :-D


Red :wink:
Saving the world with science!
User avatar
Doc Fizzix
God
 
Posts: 2281
Joined: Thu 23.09.2004, 23:36
Location: Deep in the heart of Texas
Top

Postby Ekapol » Mon 02.10.2006, 21:04

Was working on the car today (removing the oil cooler) and inside my fenders are also white.


Ah.... I was about to get to my inside fender with a can of green :-D
Last edited by Ekapol on Mon 02.10.2006, 21:07, edited 2 times in total.
"Do or do not.... there is no try."

“Named must your fear be before banish it you can.” -- Yoda
User avatar
Ekapol
God
 
Posts: 1463
Joined: Mon 19.06.2006, 21:55
Location: Sin City
Top

Postby kmckmc » Sun 05.11.2006, 09:09

Image

Image
Elan M100 S2
kmckmc
Fanatic
 
Posts: 532
Joined: Tue 21.03.2006, 10:40
Location: Taipei 101 Building, Taiwan
Top

Postby Ekapol » Mon 06.11.2006, 06:47

Are those 3 made from wood?

From this website you could get metal version of this gear.

Click Me!

Continue with Electric "Tab", then "1987-1992 Firebird/Trans Am Metal Headlight Gears"

Feeling nostalgic seeing your pictures ;-)
"Do or do not.... there is no try."

“Named must your fear be before banish it you can.” -- Yoda
User avatar
Ekapol
God
 
Posts: 1463
Joined: Mon 19.06.2006, 21:55
Location: Sin City
Top

Postby F1 LOTUS » Mon 06.11.2006, 08:36

Ekapol wrote:Are those 3 made from wood?

From this website you could get metal version of this gear.

Click Me!

Continue with Electric "Tab", then "1987-1992 Firebird/Trans Am Metal Headlight Gears"

Feeling nostalgic seeing your pictures ;-)

Look like good value :)
User avatar
F1 LOTUS
God
 
Posts: 2199
Joined: Thu 17.04.2003, 18:17
Location: SoCal, USA
Top

Postby kmckmc » Tue 07.11.2006, 15:54

This is a good choice for headlight repair kit.

http://cgi.ebay.com/ebaymotors/ws/eBayI ... 0047932090


Cheers,
Elan M100 S2
kmckmc
Fanatic
 
Posts: 532
Joined: Tue 21.03.2006, 10:40
Location: Taipei 101 Building, Taiwan
Top

Postby Ekapol » Tue 07.11.2006, 21:07

Yes, very good value.

Are those 3 pellets original one? Good to see them new though. Look nicer than million crumble pieces.

I would get the delrin parts from Rodney's site or just use the wood pieces you have and keep those 3 as the spare. :D
"Do or do not.... there is no try."

“Named must your fear be before banish it you can.” -- Yoda
User avatar
Ekapol
God
 
Posts: 1463
Joined: Mon 19.06.2006, 21:55
Location: Sin City
Top

Postby flynn23 » Thu 22.05.2008, 22:44

Hello all. I've had a problem with my lights not "rising" consistently for a few months now. If it's cold, they seem to come up, but now that it's summer, they "blink" and I have to manually raise them. A bit embarrassing when the valet asks about it.

I disassembled the actuators and the plastic gears in the spindle under the actuator motors are ground well out of tolerance (there was tons of plastic soot in the casings). I didn't want to crack open the spindle in case I couldn't find a gasket to reseal.

I've noticed the aluminum gear replacement kit from Rodney's link (THANKS!) but I wanted to bump this topic to see if anyone has done this replacement before I order the parts and burn through this holiday weekend doing the work. Any tips? Did replacing the gearing do the trick or was a motor rebuild required too? My actuator motors seem strong and fairly clean, but not sure what the typical duty cycle on these are. Might be a good idea to replace while I'm in there.

Thanks for any tips, tricks, or thoughts.
flynn23
Newbie
 
Posts: 19
Joined: Mon 24.07.2006, 02:29
Location: Nashvegas, TN
Top

Postby Candles » Thu 22.05.2008, 23:34

I think SJ Sportscars do a rebuild kit.
User avatar
Candles
God
 
Posts: 1496
Joined: Tue 22.04.2003, 09:58
Location: Bristol, UK
Top

Postby TheBard » Fri 23.05.2008, 00:40

Quite a lot of us used www.rodneydickman.com/ and his famous headlight rebuild kit.

Normally it is just the plastic bushes that have gone, and the gears will be fine. You can order just the bushes and the repacements are considerably harder.

He also supplies the gaskets needed, and even replacement metal gears, although these can have tolerance issues and need fettling to make smooth moving.

Everything you'll ever need to know is well documented on WikiLEC here.

Best of luck,
Ian
Ford Fiesta Mk2, VW Polo, Golf GTi, Lotus Elan, Honda Accord Coupe V6.

Calypso Red Cali #7683 - Bought at 29,000 miles, and sold at 75,000miles.
User avatar
TheBard
Fanatic
 
Posts: 652
Joined: Sun 16.01.2005, 05:22
Location: Washington D.C.
Top

Postby flynn23 » Fri 23.05.2008, 18:01

Excellent write up. Thanks for the link and the confirmation.

Cheers,
Scott
flynn23
Newbie
 
Posts: 19
Joined: Mon 24.07.2006, 02:29
Location: Nashvegas, TN
Top

Postby Ekapol » Mon 14.07.2008, 08:19

I rebuilt Lucy's left headlight motor just last Sunday.

This Sunday I replaced Stripey's right headlight motor with a new-rebuilt one I got from Ebay.

Sometimes it didn't work and needed a little help from me.

This time I'm sure the delrin bushes are still good but the brushes in the motor itself are well worn, judging from that when it doesn't work I can just rotate the knob on the motor 1/2 a turn and the headlight popped right up nice and strong.

It almost stopped me from working on it today when I found out that the key for my wheel lock is still at my mechanic shop. Marie quickly texted me that I can just peel of the liner.. and I was like.. heh, that's right :)

So I did it this time without removing the wheel. Just turned the wheel all the way to the right, loosen 3 bolts that hold the wheel liner and peeled it inward.

The whole thing took me just 1 hour this time :banana:


Image
You'll see 2 little cut out on the inside of front fender piece.

Image
These tools are all you need for a quick headlight motor swap. 10mm socket, 8mm socket, open-end wrench, and those 3 little helpers.

Image
New one in there, a tad too shiny glossy black from the Ebay dealer.
"Do or do not.... there is no try."

“Named must your fear be before banish it you can.” -- Yoda
User avatar
Ekapol
God
 
Posts: 1463
Joined: Mon 19.06.2006, 21:55
Location: Sin City
Top

Re: Head Light Motor Rebuilding

Postby nitroman » Sun 08.03.2009, 01:26

Delrin + grease + 18 years = a mess!

Rebuilt the motors I removed a few months back. Now I have 3 spare motors & two rebuild kits left. I'm staying well ahead of the curve in this department!
You do not have the required permissions to view the files attached to this post.
Strive for perfection in everything. (given time)
Take the best that exists & make it better. (given inclination)
If it doesn't exist, create it. (God did)
Ignore what I say. (good advice)
User avatar
nitroman
Moderator
 
Posts: 3554
Joined: Fri 18.04.2003, 01:17
Location: Jacksonville, FL
Top

Re: Head Light Motor Rebuilding

Postby Enright » Sun 08.03.2009, 19:52

You can stay even further ahead if you make sure all the joints and bearings in the headlight pod linkages are greased too!
Striking fear into the hearts of duplicate posts everywhere...! :P

BCingU,
Neil ;-)
User avatar
Enright
Modificator
 
Posts: 4860
Joined: Sun 19.12.2004, 19:21
Location: Arnold, Nottingham, England
Top

Re: Head Light Motor Rebuilding

Postby Gary » Mon 23.03.2009, 20:20

I have 2 headlamp rebuild kits for sale (including the gears and plastic bits) if anyone is interested :P
Ex owner of S2 no 480 and Red SE
User avatar
Gary
God
 
Posts: 2284
Joined: Thu 14.07.2005, 18:04
Location: Rutland
Top

Re: Head Light Motor Rebuilding

Postby rip » Tue 24.03.2009, 01:11

Gary wrote:I have 2 headlamp rebuild kits for sale (including the gears and plastic bits) if anyone is interested :P

:smt045
1990 SE
User avatar
rip
God
 
Posts: 5905
Joined: Sun 08.04.2007, 07:48
Location: Milton Keynes, UK
Top

Re: Head Light Motor Rebuilding

Postby GeoffSmith » Tue 24.03.2009, 07:33

Thought I was seeing things: Gary, posting on a technical thread? :lol:
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire
Top

Re: Head Light Motor Rebuilding

Postby Paul.P » Tue 24.03.2009, 07:54

GeoffSmith wrote:Thought I was seeing things: Gary, posting on a technical thread? :lol:


Ah yes Geoff, but it wasn't a very technical post, was it !
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
Paul.P
God
 
Posts: 4970
Joined: Sun 14.12.2003, 18:18
Location: Oakham, Rutland
Top

Re: Head Light Motor Rebuilding

Postby GeoffSmith » Tue 24.03.2009, 08:09

Paul.P wrote:
GeoffSmith wrote:Thought I was seeing things: Gary, posting on a technical thread? :lol:


Ah yes Geoff, but it wasn't a very technical post, was it !


:wink:
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire
Top
PreviousNext
Post a reply

Return to Electrical / Electronics / Stereo / Lights etc.

Who is online

Users browsing this forum: No registered users and 2 guests

© 1998 – 2026 Lotus Elan Central. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group