F1 LOTUS wrote:Apparently the release handles are from a Carlton / Senator?? Maybe a blingy alternate already exists???
Something like this, perhaps?
| Home | WikiLEC | Repairs | Upgrades | Gallery | Buy & Sell | Mountain Chips | Meets & Events | Contact |
|
Aluminum Door Pulls and Handles - Who's Interested
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
Re: Aluminum Door Pulls and Handles - Who's Interested
by dapinky » Thu 09.07.2009, 10:02
Something like this, perhaps?
Dave
Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it
...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it
...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
-
dapinky - LEC Administrator
- Posts: 10605
- Joined: Sun 15.10.2006, 12:54
- Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).
Re: Aluminum Door Pulls and Handles - Who's Interested
by Elanlover » Thu 09.07.2009, 13:52
Brian, I'm in for that price. 
I do whatever my Rice Crispies tell me to do
-
Elanlover - Moderator
- Posts: 3513
- Joined: Fri 05.08.2005, 19:11
- Location: The Great White North
Re: Aluminum Door Pulls and Handles - Who's Interested
by F1 LOTUS » Thu 09.07.2009, 21:59
dapinky wrote:F1 LOTUS wrote:Apparently the release handles are from a Carlton / Senator?? Maybe a blingy alternate already exists???
Something like this, perhaps?
Wrong vintage I suspect - apparently there's a GM part # ref on Golden Gate 'GM 32 PA 90246188 ??? Probably a late '80's model???
Otherwise - spot-on, that's the idea
-
F1 LOTUS - God
- Posts: 2199
- Joined: Thu 17.04.2003, 18:17
- Location: SoCal, USA
Re: Aluminum Door Pulls and Handles - Who's Interested
by tweetdriver63 » Thu 09.07.2009, 23:35
Anybody tried the cheapo route?
http://www.upkeepers.co.uk/Product/owa753
Maybe this stuff would work to give the same finish on parts like the handles?
http://www.upkeepers.co.uk/Product/owa753
Maybe this stuff would work to give the same finish on parts like the handles?
Chris
______________________________________
'91 Elan SE
'04 MB C230 Sport Coupe
'08 Mercury Mariner Hybrid
'12 Evora S GP Edition (In my dreams - HA!)
______________________________________
'91 Elan SE
'04 MB C230 Sport Coupe
'08 Mercury Mariner Hybrid
'12 Evora S GP Edition (In my dreams - HA!)
-
tweetdriver63 - God
- Posts: 2688
- Joined: Tue 07.08.2007, 17:12
- Location: Mississippi,USA
Re: Aluminum Door Pulls and Handles - Who's Interested
by dapinky » Fri 10.07.2009, 00:10
F1 LOTUS wrote:dapinky wrote:F1 LOTUS wrote:Apparently the release handles are from a Carlton / Senator?? Maybe a blingy alternate already exists???
Something like this, perhaps?
Wrong vintage I suspect - apparently there's a GM part # ref on Golden Gate 'GM 32 PA 90246188 ??? Probably a late '80's model???
Otherwise - spot-on, that's the idea
Well,
As i own a Vectra of the same vintage as these handles (albeit with standard black ones, not blingy chrome), I suppose it will befall me to see how they dismantle/fit the elan doors
I'll try and have a look next week when back from IOM.
Dave
Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it
...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it
...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
-
dapinky - LEC Administrator
- Posts: 10605
- Joined: Sun 15.10.2006, 12:54
- Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).
Re: Aluminum Door Pulls and Handles - Who's Interested
by tweetdriver63 » Fri 10.07.2009, 04:48
I stumbled onto Rustoleum's Stainless Steel finish today while shopping for other things at Lowe's. I decided to buy a can of it and give it a try. I had an old, messed up escutcheon in the garage, so I used it as a test. Mind you, I didn't have a really good brush to use, and I didn't feel like using my sprayer for this test (so I don't have to do the clean up, and to see if I might want to use this stuff on my door pulls/release handles -- without having to take the doors apart).
Anyway, here's the result. Remember, with a really good brush, or a sprayer, there wouldn't be any brush strokes.
This stuff costs about $20, and it actually does give a surprisingly good finish.
* This post is in no way recommending this product, or any other, it is for informational purposes only.
Anyway, here's the result. Remember, with a really good brush, or a sprayer, there wouldn't be any brush strokes.
This stuff costs about $20, and it actually does give a surprisingly good finish.
* This post is in no way recommending this product, or any other, it is for informational purposes only.
You do not have the required permissions to view the files attached to this post.
Chris
______________________________________
'91 Elan SE
'04 MB C230 Sport Coupe
'08 Mercury Mariner Hybrid
'12 Evora S GP Edition (In my dreams - HA!)
______________________________________
'91 Elan SE
'04 MB C230 Sport Coupe
'08 Mercury Mariner Hybrid
'12 Evora S GP Edition (In my dreams - HA!)
-
tweetdriver63 - God
- Posts: 2688
- Joined: Tue 07.08.2007, 17:12
- Location: Mississippi,USA
Re: Aluminum Door Pulls and Handles - Who's Interested
by theelanman » Mon 13.07.2009, 23:57
im in 
I’m normally not a praying man, but if you’re up there, please save me, Superman.
-
theelanman - Moderator
- Posts: 7296
- Joined: Fri 30.04.2004, 15:52
- Location: peak district
Re: Aluminum Door Pulls and Handles - Who's Interested
by F1 LOTUS » Tue 14.07.2009, 07:35
Things seem to be shaping-up nicely, if I can commit to 20 sets then the costs should get down towards $150
Once the costs are confirmed I'll transfer this over to the Group Buy section - hopefully later this week...
Once the costs are confirmed I'll transfer this over to the Group Buy section - hopefully later this week...
-
F1 LOTUS - God
- Posts: 2199
- Joined: Thu 17.04.2003, 18:17
- Location: SoCal, USA
Re: Aluminum Door Pulls and Handles - Who's Interested
by F1 LOTUS » Mon 20.07.2009, 04:16
Now under 'Group Buys'
http://forum.lotuselancentral.com/viewtopic.php?f=85&t=15452
http://forum.lotuselancentral.com/viewtopic.php?f=85&t=15452
-
F1 LOTUS - God
- Posts: 2199
- Joined: Thu 17.04.2003, 18:17
- Location: SoCal, USA
Who is online
Users browsing this forum: No registered users and 7 guests