Anti roll bar drop links

[bobbrown]

drop link.jpg (15.74 KiB) Viewed 8056 times

in stainless steel as the loads are not very high and the rod ends are rated at over 1127kg
Both front and rear are the same so 4 required /car, cost £25.00 each complete with new nuts and bolts so a full set is £100.00

1. texas2201 x 4
2. trig x 2
3. Denny x 4
4. woody x 4
5- Dico x 4
6. Candles x 4
7. lansledj x 4
8. Steve_P x 4

[BFG in the BRG]

Bob, don't ever sell your M100 - I'll have a new car at this rate

As always, thanks

1. texas2201 x 4
2. trig x 2
3. Denny x 4
4. woody x 4
5- Dico x 4
6. Candles x 4
7. lansledj x 4
8. Steve_P x 4
9. BFG in the BRG

[trig]

Apologies as I know this is should be for the list of who wants these drop links only.....But for those that don't know here's the message I got from SJ Sports the other week : (Please note the price of the anti-roll-bar drop links £39.60 each. These have not been available from Lotus for some years now and I have just completed re-manufacture of the links and the bushes. )

So that's £158.40 for the set before VAT

[bobbrown]

I have enough parts to make 20 axle sets so as far as the list goes then there are 3 axle sets left assuming BFG in the BRG wants 4.
I can make more but would need to get the rod ends from the USA as the UK supplier is now out of stock I had the lot.

I am hoping to get these made before Malvern so if you are going and want to collect them let me know.

Bob

[John_W]

Oh goody - another of Bob's specials.

1. texas2201 x 4
2. trig x 2
3. Denny x 4
4. woody x 4
5- Dico x 4
6. Candles x 4
7. lansledj x 4
8. Steve_P x 4
9. BFG in the BRG
10. John_W x 4

John

[M100_DMM]

Oh goody - another of Bob's specials.

1. texas2201 x 4
2. trig x 2
3. Denny x 4
4. woody x 4
5- Dico x 4
6. Candles x 4
7. lansledj x 4
8. Steve_P x 4
9. BFG in the BRG
10. John_W x 4
11. M100_DMM x2 (x4 if BFG only wants 2)

John

Unless my arithmetic is wrong, if BFG wants 2 axle sets, that leaves one axle set available. I'll have that, thanks. If, however, BFG only wants one axle set then I'll have two sets. Simples.

[bobbrown]

Made the first couple and just waiting on the seals from the USA which should be with me next week so they will be ready to send very soon

I can send them by post cost £5.00 or I can bring them with me to Malvern but which ever option you pick I will need the dosh

Bob

BTW: I will get some more rod ends and seals ordered as that is the only limit on the numbers at present

[texas2201]

Hi Bob

if you PM me your bank details I will send the money onto you - can you post them out to me as I am not sure if I can make Malvern

Cheers

Martin

[Matt RI]

1. texas2201 x 4
2. trig x 2
3. Denny x 4
4. woody x 4
5- Dico x 4
6. Candles x 4
7. lansledj x 4
8. Steve_P x 4
9. BFG in the BRG
10. John_W x 4
11. M100_DMM x2 (x4 if BFG only wants 2)
12. Matt RI x4

If available... If I should hold back some of the shipment of ends rather than sending them over the pond to you only to have you send them back again, let me know Bob!

[daveA]

Hi Bob

Adding my name to the list if ok

Same as Martin :- if you PM me your bank details I will send the money onto you - can you post them out to me as I am not able to go to Malvern.

1. texas2201 x 4
2. trig x 2
3. Denny x 4
4. woody x 4
5- Dico x 4
6. Candles x 4
7. lansledj x 4
8. Steve_P x 4
9. BFG in the BRG
10. John_W x 4
11. M100_DMM x2 (x4 if BFG only wants 2)
12. Matt R1 x 4
13. daveA x 4

thanks daveA

[bobbrown]

On to plan B
I have tried to get more of the female rod ends at the right sort of price but have failed miserably so I am reverting back to the original plan and will supply the links with male ends and center section to suit.
The male ends I can get in resonable quantitys so supply is not a problem although not as simple to make the joining piece
So the first batch will have a 10mm rod and the second batch a 17mm hex bar with a 8.5mm hole down the center
first batch

drop%20link.jpg (15.74 KiB) Viewed 7896 times

second batch

drop%20link%201a.jpg (20.97 KiB) Viewed 7896 times

[Denny]

1. texas2201 x 4
2. trig x 2
3. Denny x 4 - PAID
4. woody x 4
5- Dico x 4
6. Candles x 4
7. lansledj x 4
8. Steve_P x 4
9. BFG in the BRG
10. John_W x 4
11. M100_DMM x2 (x4 if BFG only wants 2)
12. Matt R1 x 4
13. daveA x 4

[daveA]

1. texas2201 x 4
2. trig x 2
3. Denny x 4 - PAID
4. woody x 4
5- Dico x 4
6. Candles x 4
7. lansledj x 4
8. Steve_P x 4
9. BFG in the BRG
10. John_W x 4
11. M100_DMM x2 (x4 if BFG only wants 2)
12. Matt R1 x 4
13. daveA x 4 - PAID

[texas2201]

1. texas2201 x 4 Paid
2. trig x 2
3. Denny x 4 - PAID
4. woody x 4
5- Dico x 4
6. Candles x 4
7. lansledj x 4
8. Steve_P x 4
9. BFG in the BRG
10. John_W x 4
11. M100_DMM x2 (x4 if BFG only wants 2)
12. Matt R1 x 4
13. daveA x 4 - PAID

[Dico]

1. texas2201 x 4 Paid
2. trig x 2
3. Denny x 4 - PAID
4. woody x 4
5- Dico x 4 - PAID
6. Candles x 4
7. lansledj x 4
8. Steve_P x 4
9. BFG in the BRG
10. John_W x 4
11. M100_DMM x2 (x4 if BFG only wants 2)
12. Matt R1 x 4
13. daveA x 4 - PAID

[M100_DMM]

1. texas2201 x 4 Paid
2. trig x 2
3. Denny x 4 - PAID
4. woody x 4
5- Dico x 4 - PAID
6. Candles x 4
7. lansledj x 4
8. Steve_P x 4
9. BFG in the BRG
10. John_W x 4
11. M100_DMM x4
12. Matt R1 x 4
13. daveA x 4 - PAID

Bob,

Now that there is going to be a second batch, I have amended my order to 4 units. Please PM me your address details and advise me of how you wish payment to be made.

David

[bobbrown]

I've ordered enough materials to make 15 sets or 30 axle sets or 60 in total

[BFG in the BRG]

assuming BFG in the BRG wants 4.

Sorry, won't be able to make Malvern - work gets in the way sometimes so post would be great
1. texas2201 x 4 Paid
2. trig x 2
3. Denny x 4 - PAID
4. woody x 4
5- Dico x 4 - PAID
6. Candles x 4
7. lansledj x 4
8. Steve_P x 4
9. BFG in the BRG x 4 Paid
10. John_W x 4
11. M100_DMM x4
12. Matt R1 x 4
13. daveA x 4 - PAID

[bobbrown]

Thats the first batch ready to ship so those that have paid and want them posted will get them off asap

1. texas2201 x 4 Paid - sent
2. trig x 2
3. Denny x 4 - PAID - sent
4. woody x 4
5- Dico x 4 - PAID collect Malvern?
6. Candles x 4
7. lansledj x 4
8. Steve_P x 4
9. BFG in the BRG x 4 Paid - sent
10. John_W x 4 paid - sent
11. M100_DMM x4
12. Matt R1 x 4 I will get the rest of the parts you need in the post
13. daveA x 4 - PAID - sent

Bob

[texas2201]

don't know if my car is different but the top of the front drop links on mine go into a captive bolt embedded in the front chassis box section.

and after many attempts at fitting the new ones - I gave up the front ones are in very good condition and look fairly new so we put them back on.........

so if anyone wants two of these excellent drop links I will be putting them in the for sale section - at cost

Martin