1. lansledj hubs/bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. tonny006 hubs only please
4. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
5. Nicowalker1 hubs and bearings (provisional)
6. ktskisail hubs and bearings
7. Andyt Hubs and Bearings please
8. mellowyellow Hubs and Bearings please
9. owentec Hubs and Bearings please
10. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
11. Brit-Car-Nut - Hubs only please - going to US.
12. MacII (USA)
| Home | WikiLEC | Repairs | Upgrades | Gallery | Buy & Sell | Mountain Chips | Meets & Events | Contact |
|
Rear Hub conversion 3rd run
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
93 posts
• Page 2 of 5 • 1, 2, 3, 4, 5
Re: Rear Hub conversion 3rd run
by bobbrown » Fri 30.07.2010, 07:56
Pacific Blue N/A
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
-
bobbrown - God
- Posts: 2804
- Joined: Wed 10.05.2006, 12:51
- Location: North Essex
Re: Rear Hub conversion 3rd run
by neillj » Fri 30.07.2010, 17:03
1. lansledj hubs/bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. tonny006 hubs only please
4. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
5. Nicowalker1 hubs and bearings (provisional)
6. ktskisail hubs and bearings
7. Andyt Hubs and Bearings please
8. mellowyellow Hubs and Bearings please
9. owentec Hubs and Bearings please
10. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
11. Brit-Car-Nut - Hubs only please - going to US.
12. MacII (USA)
13. neillj all parts required for 15" wheels
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. tonny006 hubs only please
4. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
5. Nicowalker1 hubs and bearings (provisional)
6. ktskisail hubs and bearings
7. Andyt Hubs and Bearings please
8. mellowyellow Hubs and Bearings please
9. owentec Hubs and Bearings please
10. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
11. Brit-Car-Nut - Hubs only please - going to US.
12. MacII (USA)
13. neillj all parts required for 15" wheels
- neillj
- Newbie
- Posts: 18
- Joined: Fri 30.07.2010, 09:23
Re: Rear Hub conversion 3rd run
by IanF » Wed 04.08.2010, 20:18
1. lansledj hubs/bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. tonny006 hubs only please
4. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
5. Nicowalker1 hubs and bearings (provisional)
6. ktskisail hubs and bearings
7. Andyt Hubs and Bearings please
8. mellowyellow Hubs and Bearings please
9. owentec Hubs and Bearings please
10. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
11. Brit-Car-Nut - Hubs only please - going to US.
12. MacII (USA)
13. neillj all parts required for 15" wheels
14 Ian F. Hubs and bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. tonny006 hubs only please
4. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
5. Nicowalker1 hubs and bearings (provisional)
6. ktskisail hubs and bearings
7. Andyt Hubs and Bearings please
8. mellowyellow Hubs and Bearings please
9. owentec Hubs and Bearings please
10. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
11. Brit-Car-Nut - Hubs only please - going to US.
12. MacII (USA)
13. neillj all parts required for 15" wheels
14 Ian F. Hubs and bearings please
- IanF
- Newbie
- Posts: 11
- Joined: Thu 01.04.2010, 21:53
- Location: East Sussex / Kent border
Re: Rear Hub conversion 3rd run
by quiksilva » Fri 06.08.2010, 23:28
IanF wrote:1. lansledj hubs/bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. tonny006 hubs only please
4. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
5. Nicowalker1 hubs and bearings (provisional)
6. ktskisail hubs and bearings
7. Andyt Hubs and Bearings please
8. mellowyellow Hubs and Bearings please
9. owentec Hubs and Bearings please
10. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
11. Brit-Car-Nut - Hubs only please - going to US.
12. MacII (USA)
13. neillj all parts required for 15" wheels
14 Ian F. Hubs and bearings please
15. quiksilva - hubs and bearings
The most successful people are those who are good at plan B.
1992 BRG Elan SE, Wilwoods, Killimanjaro Oh & a bl**dy big grin.
1992 BRG Elan SE, Wilwoods, Killimanjaro Oh & a bl**dy big grin.
-
quiksilva - Fanatic
- Posts: 324
- Joined: Tue 06.01.2004, 19:04
- Location: Darkest Essex
Re: Rear Hub conversion 3rd run
by neillj » Wed 18.08.2010, 15:23
lansledj hubs/bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. tonny006 hubs only please
4. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
5. Nicowalker1 hubs and bearings (provisional)
6. ktskisail hubs and bearings
7. Andyt Hubs and Bearings please
8. mellowyellow Hubs and Bearings please
9. owentec Hubs and Bearings please
10. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
11. Brit-Car-Nut - Hubs only please - going to US.
12. MacII (USA)
13. neillj all parts required for 15" wheels
14 Ian F. Hubs and bearings please
15. quiksilva - hubs and bearings
16.mark j hubs and bearings please 15" wheels c/o neillj
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. tonny006 hubs only please
4. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
5. Nicowalker1 hubs and bearings (provisional)
6. ktskisail hubs and bearings
7. Andyt Hubs and Bearings please
8. mellowyellow Hubs and Bearings please
9. owentec Hubs and Bearings please
10. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
11. Brit-Car-Nut - Hubs only please - going to US.
12. MacII (USA)
13. neillj all parts required for 15" wheels
14 Ian F. Hubs and bearings please
15. quiksilva - hubs and bearings
16.mark j hubs and bearings please 15" wheels c/o neillj
- neillj
- Newbie
- Posts: 18
- Joined: Fri 30.07.2010, 09:23
Re: Rear Hub conversion 3rd run
by lotusnut » Sat 21.08.2010, 22:39
neillj wrote:lansledj hubs/bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. tonny006 hubs only please
4. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
5. Nicowalker1 hubs and bearings (provisional)
6. ktskisail hubs and bearings
7. Andyt Hubs and Bearings please
8. mellowyellow Hubs and Bearings please
9. owentec Hubs and Bearings please
10. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
11. Brit-Car-Nut - Hubs only please - going to US.
12. MacII (USA)
13. neillj all parts required for 15" wheels
14 Ian F. Hubs and bearings please
15. quiksilva - hubs and bearings
16.mark j hubs and bearings please 15" wheels c/o neillj
17.lotusnut - hubs only please.
1991 Elan SE Turbo, 1976 Elite 501,1975 Elan +2S 130/5 and Passat TDi Est.
- lotusnut
- Fanatic
- Posts: 379
- Joined: Sun 28.02.2010, 21:26
- Location: Newmarket, Suffolk
Re: Rear Hub conversion 3rd run
by peteoddcar » Mon 06.09.2010, 21:01
Brit-Car-Nut wrote:1. lansledj hubs/bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. tonny006 hubs only please
4. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
5. Nicowalker1 hubs and bearings (provisional)
6. ktskisail hubs and bearings
7. Andyt Hubs and Bearings please
8. mellowyellow Hubs and Bearings please
9. owentec Hubs and Bearings please
10. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
11. Brit-Car-Nut - Hubs only please - going to US.
12 Peteoddcar -Hubs and bearings please
Peteoddcar - Pacific Blue SE 1990
-
peteoddcar - Fanatic
- Posts: 509
- Joined: Thu 26.11.2009, 23:41
- Location: Ewhurst, Surrey Hills
Re: Rear Hub conversion 3rd run
by bobbrown » Mon 06.09.2010, 21:18
1. lansledj hubs/bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. tonny006 hubs only please
4. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
5. Nicowalker1 hubs and bearings (provisional)
6. ktskisail hubs and bearings
7. Andyt Hubs and Bearings please
8. mellowyellow Hubs and Bearings please
9. owentec Hubs and Bearings please
10. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
11. Brit-Car-Nut - Hubs only please - going to US.
12. MacII (USA)
13. neillj all parts required for 15" wheels
14 Ian F. Hubs and bearings please
15. quiksilva - hubs and bearings
16.mark j hubs and bearings please 15" wheels c/o neillj
17.lotusnut - hubs only please.
18. Peteoddcar -Hubs and bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. tonny006 hubs only please
4. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
5. Nicowalker1 hubs and bearings (provisional)
6. ktskisail hubs and bearings
7. Andyt Hubs and Bearings please
8. mellowyellow Hubs and Bearings please
9. owentec Hubs and Bearings please
10. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
11. Brit-Car-Nut - Hubs only please - going to US.
12. MacII (USA)
13. neillj all parts required for 15" wheels
14 Ian F. Hubs and bearings please
15. quiksilva - hubs and bearings
16.mark j hubs and bearings please 15" wheels c/o neillj
17.lotusnut - hubs only please.
18. Peteoddcar -Hubs and bearings please
Pacific Blue N/A
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
-
bobbrown - God
- Posts: 2804
- Joined: Wed 10.05.2006, 12:51
- Location: North Essex
Re: Rear Hub conversion 3rd run
by Brit-Car-Nut » Mon 06.09.2010, 21:44
1. lansledj hubs/bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. tonny006 hubs only please
4. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
5. Nicowalker1 hubs and bearings (provisional)
6. ktskisail hubs and bearings
7. Andyt Hubs and Bearings please
8. mellowyellow Hubs and Bearings please
9. owentec Hubs and Bearings please
10. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
11. MacII (USA)
12. neillj all parts required for 15" wheels
13 Ian F. Hubs and bearings please
14. quiksilva - hubs and bearings
15.mark j hubs and bearings please 15" wheels c/o neillj
16.lotusnut - hubs only please.
17. Peteoddcar -Hubs and bearings please
Sorry but time and funding have run out for me
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. tonny006 hubs only please
4. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
5. Nicowalker1 hubs and bearings (provisional)
6. ktskisail hubs and bearings
7. Andyt Hubs and Bearings please
8. mellowyellow Hubs and Bearings please
9. owentec Hubs and Bearings please
10. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
11. MacII (USA)
12. neillj all parts required for 15" wheels
13 Ian F. Hubs and bearings please
14. quiksilva - hubs and bearings
15.mark j hubs and bearings please 15" wheels c/o neillj
16.lotusnut - hubs only please.
17. Peteoddcar -Hubs and bearings please
Sorry but time and funding have run out for me
Please contact me via eMail, not by PM
- Brit-Car-Nut
- God
- Posts: 4820
- Joined: Tue 03.07.2007, 17:07
- Location: Charlotte, NC USA
Re: Rear Hub conversion 3rd run
by tonny006 » Mon 06.09.2010, 22:31
1. lansledj hubs/bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
4. Nicowalker1 hubs and bearings (provisional)
5. ktskisail hubs and bearings
6. Andyt Hubs and Bearings please
7. mellowyellow Hubs and Bearings please
8. owentec Hubs and Bearings please
9. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
10. MacII (USA)
11. neillj all parts required for 15" wheels
12 Ian F. Hubs and bearings please
13. quiksilva - hubs and bearings
14.mark j hubs and bearings please 15" wheels c/o neillj
15.lotusnut - hubs only please.
16. Peteoddcar -Hubs and bearings please
Sorry but i have some other expensive problems with the car to deal with first
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
4. Nicowalker1 hubs and bearings (provisional)
5. ktskisail hubs and bearings
6. Andyt Hubs and Bearings please
7. mellowyellow Hubs and Bearings please
8. owentec Hubs and Bearings please
9. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
10. MacII (USA)
11. neillj all parts required for 15" wheels
12 Ian F. Hubs and bearings please
13. quiksilva - hubs and bearings
14.mark j hubs and bearings please 15" wheels c/o neillj
15.lotusnut - hubs only please.
16. Peteoddcar -Hubs and bearings please
Sorry but i have some other expensive problems with the car to deal with first
-
tonny006 - Fanatic
- Posts: 276
- Joined: Wed 11.02.2009, 17:26
- Location: Church Crookham Fleet
Re: Rear Hub conversion 3rd run
by superbad » Fri 29.10.2010, 18:14
1. lansledj hubs/bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
4. Nicowalker1 hubs and bearings (provisional)
5. ktskisail hubs and bearings
6. Andyt Hubs and Bearings please
7. mellowyellow Hubs and Bearings please
8. owentec Hubs and Bearings please
9. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
10. MacII (USA)
11. neillj all parts required for 15" wheels
12 Ian F. Hubs and bearings please
13. quiksilva - hubs and bearings
14.mark j hubs and bearings please 15" wheels c/o neillj
15.lotusnut - hubs only please.
16. Peteoddcar -Hubs and bearings please
17. superbad - hubs and bearings (USA shipping)
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
4. Nicowalker1 hubs and bearings (provisional)
5. ktskisail hubs and bearings
6. Andyt Hubs and Bearings please
7. mellowyellow Hubs and Bearings please
8. owentec Hubs and Bearings please
9. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
10. MacII (USA)
11. neillj all parts required for 15" wheels
12 Ian F. Hubs and bearings please
13. quiksilva - hubs and bearings
14.mark j hubs and bearings please 15" wheels c/o neillj
15.lotusnut - hubs only please.
16. Peteoddcar -Hubs and bearings please
17. superbad - hubs and bearings (USA shipping)
-
superbad - Fanatic
- Posts: 427
- Joined: Sun 28.12.2008, 06:02
- Location: Denver, CO
Re: Rear Hub conversion 3rd run
by bobbrown » Fri 29.10.2010, 18:39
As it looks like we are going to struggle or take a long time to get to the 20 I said at the beginning of this thread I have made the decision to get 20 sets made and will place the order for the hubs on Monday.
They will take three or four weeks before they are ready as the company that does the machining fits them in between other jobs to help keep the cost down plus they do not drop every thing to make these up, such is life.
I'll need to sort out the dosh at some point as the guy will want paid and I am already covering three pairs.
Bob
They will take three or four weeks before they are ready as the company that does the machining fits them in between other jobs to help keep the cost down plus they do not drop every thing to make these up, such is life.
I'll need to sort out the dosh at some point as the guy will want paid and I am already covering three pairs.
Bob
Pacific Blue N/A
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
-
bobbrown - God
- Posts: 2804
- Joined: Wed 10.05.2006, 12:51
- Location: North Essex
Re: Rear Hub conversion 3rd run
by lotusnut » Fri 29.10.2010, 20:19
Bob Is the price still £130.48 for the pair?
1991 Elan SE Turbo, 1976 Elite 501,1975 Elan +2S 130/5 and Passat TDi Est.
- lotusnut
- Fanatic
- Posts: 379
- Joined: Sun 28.02.2010, 21:26
- Location: Newmarket, Suffolk
Re: Rear Hub conversion 3rd run
by bobbrown » Fri 29.10.2010, 21:19
Yes
Pacific Blue N/A
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
-
bobbrown - God
- Posts: 2804
- Joined: Wed 10.05.2006, 12:51
- Location: North Essex
Re: Rear Hub conversion 3rd run
by dunnlor » Sat 30.10.2010, 03:19
1. lansledj hubs/bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
4. Nicowalker1 hubs and bearings (provisional)
5. ktskisail hubs and bearings
6. Andyt Hubs and Bearings please
7. mellowyellow Hubs and Bearings please
8. owentec Hubs and Bearings please
9. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
10. MacII (USA)
11. neillj all parts required for 15" wheels
12 Ian F. Hubs and bearings please
13. quiksilva - hubs and bearings
14.mark j hubs and bearings please 15" wheels c/o neillj
15.lotusnut - hubs only please.
16. Peteoddcar -Hubs and bearings please
17. superbad - hubs and bearings (USA shipping)
18. dunnlor - hubs only (USA shipping)
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
4. Nicowalker1 hubs and bearings (provisional)
5. ktskisail hubs and bearings
6. Andyt Hubs and Bearings please
7. mellowyellow Hubs and Bearings please
8. owentec Hubs and Bearings please
9. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
10. MacII (USA)
11. neillj all parts required for 15" wheels
12 Ian F. Hubs and bearings please
13. quiksilva - hubs and bearings
14.mark j hubs and bearings please 15" wheels c/o neillj
15.lotusnut - hubs only please.
16. Peteoddcar -Hubs and bearings please
17. superbad - hubs and bearings (USA shipping)
18. dunnlor - hubs only (USA shipping)
- dunnlor
- Enthusiast
- Posts: 185
- Joined: Tue 10.01.2006, 05:09
- Location: Northern Virginia, USA
Re: Rear Hub conversion 3rd run
by AndyT » Thu 11.11.2010, 10:17
1. lansledj hubs/bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
4. Nicowalker1 hubs and bearings (provisional)
5. ktskisail hubs and bearings
6. mellowyellow Hubs and Bearings please
7. owentec Hubs and Bearings please
8. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
9. MacII (USA)
10. neillj all parts required for 15" wheels
11 Ian F. Hubs and bearings please
12. quiksilva - hubs and bearings
13.mark j hubs and bearings please 15" wheels c/o neillj
14.lotusnut - hubs only please.
15. Peteoddcar -Hubs and bearings please
16. superbad - hubs and bearings (USA shipping)
17. dunnlor - hubs only (USA shipping)
Sorry but I have to remove my name from the list.
My car hasn't moved for 4 months since my daughter was born so can't justify the upgrade
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
4. Nicowalker1 hubs and bearings (provisional)
5. ktskisail hubs and bearings
6. mellowyellow Hubs and Bearings please
7. owentec Hubs and Bearings please
8. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
9. MacII (USA)
10. neillj all parts required for 15" wheels
11 Ian F. Hubs and bearings please
12. quiksilva - hubs and bearings
13.mark j hubs and bearings please 15" wheels c/o neillj
14.lotusnut - hubs only please.
15. Peteoddcar -Hubs and bearings please
16. superbad - hubs and bearings (USA shipping)
17. dunnlor - hubs only (USA shipping)
Sorry but I have to remove my name from the list.
My car hasn't moved for 4 months since my daughter was born so can't justify the upgrade
-
AndyT - Tinkerer
- Posts: 53
- Joined: Thu 06.03.2008, 23:35
- Location: Clitheroe Lancashire
Re: Rear Hub conversion 3rd run
by bobbrown » Thu 11.11.2010, 20:01
1. lansledj hubs/bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
4. Nicowalker1 hubs and bearings (provisional)
5. ktskisail hubs and bearings
6. mellowyellow Hubs and Bearings please
7. owentec Hubs and Bearings please
8. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
9. MacII (USA)
10. neillj all parts required for 15" wheels
11 Ian F. Hubs and bearings please
12. quiksilva - hubs and bearings
13.mark j hubs and bearings please 15" wheels c/o neillj
14.lotusnut - hubs only please. Paid.
15. Peteoddcar -Hubs and bearings please
16. superbad - hubs and bearings (USA shipping)
17. dunnlor - hubs only (USA shipping)
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
4. Nicowalker1 hubs and bearings (provisional)
5. ktskisail hubs and bearings
6. mellowyellow Hubs and Bearings please
7. owentec Hubs and Bearings please
8. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
9. MacII (USA)
10. neillj all parts required for 15" wheels
11 Ian F. Hubs and bearings please
12. quiksilva - hubs and bearings
13.mark j hubs and bearings please 15" wheels c/o neillj
14.lotusnut - hubs only please. Paid.
15. Peteoddcar -Hubs and bearings please
16. superbad - hubs and bearings (USA shipping)
17. dunnlor - hubs only (USA shipping)
Pacific Blue N/A
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
" When you’re up to your arse in alligators, it’s difficult to remember that the object of the exercise is to drain the swamp"
please use email for correspondence
-
bobbrown - God
- Posts: 2804
- Joined: Wed 10.05.2006, 12:51
- Location: North Essex
Re: Rear Hub conversion 3rd run
by jimbob » Fri 12.11.2010, 22:32
1. lansledj hubs/bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
4. Nicowalker1 hubs and bearings (provisional)
5. ktskisail hubs and bearings
6. mellowyellow Hubs and Bearings please
7. owentec Hubs and Bearings please
8. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
9. MacII (USA)
10. neillj all parts required for 15" wheels
11 Ian F. Hubs and bearings please
12. quiksilva - hubs and bearings
13.mark j hubs and bearings please 15" wheels c/o neillj
14.lotusnut - hubs only please. Paid.
15. Peteoddcar -Hubs and bearings please
16. superbad - hubs and bearings (USA shipping)
17. dunnlor - hubs only (USA shipping)
18. jimbob - Hubs and bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
4. Nicowalker1 hubs and bearings (provisional)
5. ktskisail hubs and bearings
6. mellowyellow Hubs and Bearings please
7. owentec Hubs and Bearings please
8. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
9. MacII (USA)
10. neillj all parts required for 15" wheels
11 Ian F. Hubs and bearings please
12. quiksilva - hubs and bearings
13.mark j hubs and bearings please 15" wheels c/o neillj
14.lotusnut - hubs only please. Paid.
15. Peteoddcar -Hubs and bearings please
16. superbad - hubs and bearings (USA shipping)
17. dunnlor - hubs only (USA shipping)
18. jimbob - Hubs and bearings please
Black '92 Elan SE Turbo (Getting back into it!)
Road Legal buggy believe it or not it corners better than the Elan !
08 VW Caddy TDi
Road Legal buggy believe it or not it corners better than the Elan !
08 VW Caddy TDi
-
jimbob - Sadly departed but never forgotten
- Posts: 254
- Joined: Tue 05.09.2006, 09:07
- Location: Ross-shire, Scottish Highlands
Re: Rear Hub conversion 3rd run
by hoppy66 » Tue 23.11.2010, 14:06
Bob, I'm in for hubs and bearings plase. Please see email for payment and shipping details.
Cheers, Nigel
1. lansledj hubs/bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
4. Nicowalker1 hubs and bearings (provisional)
5. ktskisail hubs and bearings
6. mellowyellow Hubs and Bearings please
7. owentec Hubs and Bearings please
8. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
9. MacII (USA)
10. neillj all parts required for 15" wheels
11 Ian F. Hubs and bearings please
12. quiksilva - hubs and bearings
13.mark j hubs and bearings please 15" wheels c/o neillj
14.lotusnut - hubs only please. Paid.
15. Peteoddcar -Hubs and bearings please
16. superbad - hubs and bearings (USA shipping)
17. dunnlor - hubs only (USA shipping)
18. jimbob - Hubs and bearings please
19. hoppy66 - Hubs & bearings please (plus shipping to Singapore)
Cheers, Nigel
1. lansledj hubs/bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
4. Nicowalker1 hubs and bearings (provisional)
5. ktskisail hubs and bearings
6. mellowyellow Hubs and Bearings please
7. owentec Hubs and Bearings please
8. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
9. MacII (USA)
10. neillj all parts required for 15" wheels
11 Ian F. Hubs and bearings please
12. quiksilva - hubs and bearings
13.mark j hubs and bearings please 15" wheels c/o neillj
14.lotusnut - hubs only please. Paid.
15. Peteoddcar -Hubs and bearings please
16. superbad - hubs and bearings (USA shipping)
17. dunnlor - hubs only (USA shipping)
18. jimbob - Hubs and bearings please
19. hoppy66 - Hubs & bearings please (plus shipping to Singapore)
- hoppy66
- Newbie
- Posts: 27
- Joined: Tue 21.09.2010, 22:09
- Location: Singapore
Re: Rear Hub conversion 3rd run
by Denny » Wed 24.11.2010, 09:02
1. lansledj hubs/bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
4. Nicowalker1 hubs and bearings (provisional)
5. ktskisail hubs and bearings
6. mellowyellow Hubs and Bearings please
7. owentec Hubs and Bearings please
8. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
9. MacII (USA)
10. neillj all parts required for 15" wheels
11 Ian F. Hubs and bearings please
12. quiksilva - hubs and bearings
13.mark j hubs and bearings please 15" wheels c/o neillj
14.lotusnut - hubs only please. Paid.
15. Peteoddcar -Hubs and bearings please
16. superbad - hubs and bearings (USA shipping)
17. dunnlor - hubs only (USA shipping)
18. jimbob - Hubs and bearings please
19. hoppy66 - Hubs & bearings please (plus shipping to Singapore)
20. Denny - Hubs and bearings please
2. Candles: Rear hubs and bearings. Will want the rear discs and calipers so PM inbound....
3. Paul Reid: Hubs and bearings. Brakes all round too! PM sent.
4. Nicowalker1 hubs and bearings (provisional)
5. ktskisail hubs and bearings
6. mellowyellow Hubs and Bearings please
7. owentec Hubs and Bearings please
8. Kenich - Hubs and Bearings please (depending on when funds are needed by but should be good for the £££)
9. MacII (USA)
10. neillj all parts required for 15" wheels
11 Ian F. Hubs and bearings please
12. quiksilva - hubs and bearings
13.mark j hubs and bearings please 15" wheels c/o neillj
14.lotusnut - hubs only please. Paid.
15. Peteoddcar -Hubs and bearings please
16. superbad - hubs and bearings (USA shipping)
17. dunnlor - hubs only (USA shipping)
18. jimbob - Hubs and bearings please
19. hoppy66 - Hubs & bearings please (plus shipping to Singapore)
20. Denny - Hubs and bearings please
Green 1990 SE 89,000 miles - Sold 2014
Red 1990 SE 28,000 miles - Bought 2020. I should drive this more often!
Red 1990 SE 28,000 miles - Bought 2020. I should drive this more often!
-
Denny - Fanatic
- Posts: 378
- Joined: Tue 24.07.2007, 11:43
- Location: North Yorkshire
93 posts
• Page 2 of 5 • 1, 2, 3, 4, 5
Who is online
Users browsing this forum: No registered users and 5 guests