The switcher should have no effect on off-boost settings. AFAIK it only modifies boost targets & mixture settings when on boost. When off boost, your ECU should switch back to closed-loop mode & adjust mixture according to the lambda sensor values.
My exhaust was REALLY sooty when the timing was set by the book. It spluttered to life, economy was down, overrun was very common, overboost occurred at 4100rpm & boost gave me very little extra performance.
After a bit of trial & error with ignition timing, I improved all these without introducing knock. I then got the timing light out & found it was 32 btdc. I still don't understand why & won't begin to pretend that there is not something odd about my engine.


