"B" Post Caps - How many need replacements?

[Brit-Car-Nut]

I am looking into having the tooling made to reproduce the "B" Post caps used on the M100.
I am aware that there are two styles with different hinge designs and I hope to offer both styles.
Can you please let me know if you are interested in a PAIR and if you require the early or later design.
If you don't know which design you need, here is a link to each: Early Style and Later Style



Early Style on the left and later style on the right

The later style uses a hinge with an embedded hinge that is pop-riveted at the two holes. Right now those are not available, so you will need to re-use your existing hinges.
I will look into finding a source for those too, but right now, I need to know if there is enough demand to run this project.
This is a non-commitment list. You are under no obligation to buy but without knowing the demand, I can't decide how many to make and how to price them.
NO MONEY will be collected until the parts are ready to ship and will most likely be posted from both the US and the UK.
I want them to be as affordable as possible and that comes when we spread the total cost across the most sales (Like the escutcheon project)

Please join in:

1. Brit-Car-Nut - Later
2.
3.
4.
5.
6.
7.
8.
10.
11.
12.
13.
14.
15.

If you don't know how to join, just reply saying you want to be included and I will add you.
If you want more than one set, add your name multiple times. It makes the math easier later on.
Thank you.

[DeanG]

I would probably take a set.

[JohnB]

Please join in:

1. Brit-Car-Nut - Later
2. JohnB - Early
3.
4.
5.
6.
7.
8.
10.
11.
12.
13.
14.
15.

[Brit-Car-Nut]

I am looking into having the tooling made to reproduce the "B" Post caps used on the M100.
I am aware that there are two styles with different hinge designs and I hope to offer both styles.
Can you please let me know if you are interested in a PAIR and if you require the early or later design.
If you don't know which design you need, here is a link to each: Early Stylle and Later Style
The later style uses a hinge with an embedded hinge that is pop-riveted at the two holes. Right now those are not available, so you will need to re-use your existing hinges.
I will look into finding a source for those too, but right now, I need to know if there is enough demand to run this project.
This is a non-commitment list. You are under no obligation to buy but without knowing the demand, I can't decide how many to make and how to price them.
NO MONEY will be collected until the parts are ready to ship and will most likely be posted from both the US and the UK.
I want them to be as affordable as possible and that comes when we spread the total cost across the most sales (Like the escutcheon project)

Please join in:

1. Brit-Car-Nut - Later
2. DeanG - Later
3. JohnB - Early
4.
5.
6.
7.
8.
10.
11.
12.
13.
14.
15.

If you don't know how to join, just reply saying you want to be included and I will add you.
If you want more than one set, add your name multiple times. It makes the math easier later on.
Thank you.

[steve matthews]

I am looking into having the tooling made to reproduce the "B" Post caps used on the M100.
I am aware that there are two styles with different hinge designs and I hope to offer both styles.
Can you please let me know if you are interested in a PAIR and if you require the early or later design.
If you don't know which design you need, here is a link to each: Early Stylle and Later Style
The later style uses a hinge with an embedded hinge that is pop-riveted at the two holes. Right now those are not available, so you will need to re-use your existing hinges.
I will look into finding a source for those too, but right now, I need to know if there is enough demand to run this project.
This is a non-commitment list. You are under no obligation to buy but without knowing the demand, I can't decide how many to make and how to price them.
NO MONEY will be collected until the parts are ready to ship and will most likely be posted from both the US and the UK.
I want them to be as affordable as possible and that comes when we spread the total cost across the most sales (Like the escutcheon project)

Please join in:

1. Brit-Car-Nut - Later
2. DeanG - Later
3. JohnB - Early
4. steve m - later
5.
6.
7.
8.
10.
11.
12.
13.
14.
15.

If you don't know how to join, just reply saying you want to be included and I will add you.
If you want more than one set, add your name multiple times. It makes the math easier later on.
Thank you.

[dunnlor]

I am looking into having the tooling made to reproduce the "B" Post caps used on the M100.
I am aware that there are two styles with different hinge designs and I hope to offer both styles.
Can you please let me know if you are interested in a PAIR and if you require the early or later design.
If you don't know which design you need, here is a link to each: Early Stylle and Later Style
The later style uses a hinge with an embedded hinge that is pop-riveted at the two holes. Right now those are not available, so you will need to re-use your existing hinges.
I will look into finding a source for those too, but right now, I need to know if there is enough demand to run this project.
This is a non-commitment list. You are under no obligation to buy but without knowing the demand, I can't decide how many to make and how to price them.
NO MONEY will be collected until the parts are ready to ship and will most likely be posted from both the US and the UK.
I want them to be as affordable as possible and that comes when we spread the total cost across the most sales (Like the escutcheon project)

Please join in:

1. Brit-Car-Nut - Later
2. DeanG - Later
3. JohnB - Early
4. steve m
5. Dunnlor - Later
6.
7.
8.
10.
11.
12.
13.
14.
15.

If you don't know how to join, just reply saying you want to be included and I will add you.
If you want more than one set, add your name multiple times. It makes the math easier later on.
Thank you.

[FredFlanagan]

I am looking into having the tooling made to reproduce the "B" Post caps used on the M100.
I am aware that there are two styles with different hinge designs and I hope to offer both styles.
Can you please let me know if you are interested in a PAIR and if you require the early or later design.
If you don't know which design you need, here is a link to each: Early Stylle and Later Style
The later style uses a hinge with an embedded hinge that is pop-riveted at the two holes. Right now those are not available, so you will need to re-use your existing hinges.
I will look into finding a source for those too, but right now, I need to know if there is enough demand to run this project.
This is a non-commitment list. You are under no obligation to buy but without knowing the demand, I can't decide how many to make and how to price them.
NO MONEY will be collected until the parts are ready to ship and will most likely be posted from both the US and the UK.
I want them to be as affordable as possible and that comes when we spread the total cost across the most sales (Like the escutcheon project)

Please join in:

1. Brit-Car-Nut - Later
2. DeanG - Later
3. JohnB - Early
4. steve m
5. Dunnlor - Later
6. Fredflanagan - early
7.
8.
10.
11.
12.
13.
14.
15.

If you don't know how to join, just reply saying you want to be included and I will add you.
If you want more than one set, add your name multiple times. It makes the math easier later on.
Thank you.

[wayne]

I am looking into having the tooling made to reproduce the "B" Post caps used on the M100.
I am aware that there are two styles with different hinge designs and I hope to offer both styles.
Can you please let me know if you are interested in a PAIR and if you require the early or later design.
If you don't know which design you need, here is a link to each: Early Stylle and Later Style
The later style uses a hinge with an embedded hinge that is pop-riveted at the two holes. Right now those are not available, so you will need to re-use your existing hinges.
I will look into finding a source for those too, but right now, I need to know if there is enough demand to run this project.
This is a non-commitment list. You are under no obligation to buy but without knowing the demand, I can't decide how many to make and how to price them.
NO MONEY will be collected until the parts are ready to ship and will most likely be posted from both the US and the UK.
I want them to be as affordable as possible and that comes when we spread the total cost across the most sales (Like the escutcheon project)

Please join in:

1. Brit-Car-Nut - Later
2. DeanG - Later
3. JohnB - Early
4. steve m
5. Dunnlor - Later
6. Fredflanagan - early
7. wayne - later
8.
10.
11.
12.
13.
14.
15.

If you don't know how to join, just reply saying you want to be included and I will add you.
If you want more than one set, add your name multiple times. It makes the math easier later on.
Thank you.

[nsr250]

FredFlanagan wrote:I am looking into having the tooling made to reproduce the "B" Post caps used on the M100.
I am aware that there are two styles with different hinge designs and I hope to offer both styles.
Can you please let me know if you are interested in a PAIR and if you require the early or later design.
If you don't know which design you need, here is a link to each: Early Stylle and Later Style
The later style uses a hinge with an embedded hinge that is pop-riveted at the two holes. Right now those are not available, so you will need to re-use your existing hinges.
I will look into finding a source for those too, but right now, I need to know if there is enough demand to run this project.
This is a non-commitment list. You are under no obligation to buy but without knowing the demand, I can't decide how many to make and how to price them.
NO MONEY will be collected until the parts are ready to ship and will most likely be posted from both the US and the UK.
I want them to be as affordable as possible and that comes when we spread the total cost across the most sales (Like the escutcheon project)

Please join in:

1. Brit-Car-Nut - Later
2. DeanG - Later
3. JohnB - Early
4. steve m
5. Dunnlor - Later
6. Fredflanagan - early
7. wayne - later
8. nsr250 - later
10.
11.
12.
13.
14.
15.

If you don't know how to join, just reply saying you want to be included and I will add you.
If you want more than one set, add your name multiple times. It makes the math easier later on.
Thank you.

[steve matthews]

I am looking into having the tooling made to reproduce the "B" Post caps used on the M100.
I am aware that there are two styles with different hinge designs and I hope to offer both styles.
Can you please let me know if you are interested in a PAIR and if you require the early or later design.
If you don't know which design you need, here is a link to each: Early Stylle and Later Style
The later style uses a hinge with an embedded hinge that is pop-riveted at the two holes. Right now those are not available, so you will need to re-use your existing hinges.
I will look into finding a source for those too, but right now, I need to know if there is enough demand to run this project.
This is a non-commitment list. You are under no obligation to buy but without knowing the demand, I can't decide how many to make and how to price them.
NO MONEY will be collected until the parts are ready to ship and will most likely be posted from both the US and the UK.
I want them to be as affordable as possible and that comes when we spread the total cost across the most sales (Like the escutcheon project)

Please join in:

1. Brit-Car-Nut - Later
2. DeanG - Later
3. JohnB - Early
4.flanagan - early
7.
8.
10.
11.
12.
13.
14.
15.

If you don't know how to join, just reply saying you want to be included and I will add you.
If you want more than one set, add your name multiple times. It makes the math easier later on.
Thank you.

[Brit-Car-Nut]

I am looking into having the tooling made to reproduce the "B" Post caps used on the M100.
I am aware that there are two styles with different hinge designs and I hope to offer both styles.
Can you please let me know if you are interested in a PAIR and if you require the early or later design.
If you don't know which design you need, here are some pictures:

Early Style on the left and Later Style on the right

The later style uses a hinge with an embedded hinge that is pop-riveted at the two holes. Right now those are not available, so you will need to re-use your existing hinges.
I will look into finding a source for those too, but right now, I need to know if there is enough demand to run this project.
This is a non-commitment list. You are under no obligation to buy but without knowing the demand, I can't decide how many to make and how to price them.
NO MONEY will be collected until the parts are ready to ship and will most likely be posted from both the US and the UK.
I want them to be as affordable as possible and that comes when we spread the total cost across the most sales (Like the escutcheon project)

Please join in:

1. Brit-Car-Nut - Later
2. DeanG - Later
3. JohnB - Early
4. Dunnlor - Later
5. Fredflanagan - early
6. Wayne - Later
7. NSR-250 - Later
8. Wienlot - Early
10.
11.
12.
13.
14.
15.

If you don't know how to join, just reply saying you want to be included and I will add you.
If you want more than one set, add your name multiple times. It makes the math easier later on.
Thank you.

[cliff]

I am looking into having the tooling made to reproduce the "B" Post caps used on the M100.
I am aware that there are two styles with different hinge designs and I hope to offer both styles.
Can you please let me know if you are interested in a PAIR and if you require the early or later design.
If you don't know which design you need, here is a link to each: Early Stylle and Later Style
The later style uses a hinge with an embedded hinge that is pop-riveted at the two holes. Right now those are not available, so you will need to re-use your existing hinges.
I will look into finding a source for those too, but right now, I need to know if there is enough demand to run this project.
This is a non-commitment list. You are under no obligation to buy but without knowing the demand, I can't decide how many to make and how to price them.
NO MONEY will be collected until the parts are ready to ship and will most likely be posted from both the US and the UK.
I want them to be as affordable as possible and that comes when we spread the total cost across the most sales (Like the escutcheon project)

Please join in:

1. Brit-Car-Nut - Later
2. DeanG - Later
3. JohnB - Early
4. Dunnlor - Later
5. Fredflanagan - early
6. Wayne - Later
7. NSR-250 - Later
8. Wienlot - Early
9. Cliff - Early
10.
11.
12.
13.
14.
15.


If you don't know how to join, just reply saying you want to be included and I will add you.
If you want more than one set, add your name multiple times. It makes the math easier later on.
Thank you.

[Brit-Car-Nut]

I am looking into having the tooling made to reproduce the "B" Post caps used on the M100.
I am aware that there are two styles with different hinge designs and I hope to offer both styles.
Can you please let me know if you are interested in a PAIR and if you require the early or later design.
If you don't know which design you need, here are some pictures:



Early Style on the left and Later Style on the right

The later style uses a hinge with an embedded hinge that is pop-riveted at the two holes. Right now those are not available, so you will need to re-use your existing hinges.
I will look into finding a source for those too, but right now, I need to know if there is enough demand to run this project.
This is a non-commitment list. You are under no obligation to buy but without knowing the demand, I can't decide how many to make and how to price them.
NO MONEY will be collected until the parts are ready to ship and will most likely be posted from both the US and the UK.
I want them to be as affordable as possible and that comes when we spread the total cost across the most sales (Like the escutcheon project)

Please join in:

1. Brit-Car-Nut - Later
2. DeanG - Later
3. JohnB - Early
4. Dunnlor - Later
5. Fredflanagan - early
6. Wayne - Later
7. NSR-250 - Later
8. Wienlot - Early
10. Cliff - Early
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.

If you don't know how to join, just reply saying you want to be included and I will add you.
If you want more than one set, add your name multiple times. It makes the math easier later on.
Thank you.

[lotustonybassplayer]

hi can you add me please. early type thanks

[nicowalker1]

I am looking into having the tooling made to reproduce the "B" Post caps used on the M100.
I am aware that there are two styles with different hinge designs and I hope to offer both styles.
Can you please let me know if you are interested in a PAIR and if you require the early or later design.
If you don't know which design you need, here are some pictures:



Early Style on the left and Later Style on the right

The later style uses a hinge with an embedded hinge that is pop-riveted at the two holes. Right now those are not available, so you will need to re-use your existing hinges.
I will look into finding a source for those too, but right now, I need to know if there is enough demand to run this project.
This is a non-commitment list. You are under no obligation to buy but without knowing the demand, I can't decide how many to make and how to price them.
NO MONEY will be collected until the parts are ready to ship and will most likely be posted from both the US and the UK.
I want them to be as affordable as possible and that comes when we spread the total cost across the most sales (Like the escutcheon project)

Please join in:

1. Brit-Car-Nut - Later
2. DeanG - Later
3. JohnB - Early
4. Dunnlor - Later
5. Fredflanagan - early
6. Wayne - Later
7. NSR-250 - Later
8. Wienlot - Early
10. Cliff - Early
11. Nicowalker1 - early
12.
13.
14.
15.
16.
17.
18.
19.
20.

If you don't know how to join, just reply saying you want to be included and I will add you.
If you want more than one set, add your name multiple times. It makes the math easier later on.
Thank you.

[Brit-Car-Nut]

I am looking into having the tooling made to reproduce the "B" Post caps used on the M100.
I am aware that there are two styles with different hinge designs and I hope to offer both styles.
Can you please let me know if you are interested in a PAIR and if you require the early or later design.
If you don't know which design you need, here are some pictures:



Early Style on the left and Later Style on the right

The later style uses a hinge with an embedded hinge that is pop-riveted at the two holes. Right now those are not available, so you will need to re-use your existing hinges.
I will look into finding a source for those too, but right now, I need to know if there is enough demand to run this project.
This is a non-commitment list. You are under no obligation to buy but without knowing the demand, I can't decide how many to make and how to price them.
NO MONEY will be collected until the parts are ready to ship and will most likely be posted from both the US and the UK.
I want them to be as affordable as possible and that comes when we spread the total cost across the most sales (Like the escutcheon project)

Please join in:

1. Brit-Car-Nut - Later
2. DeanG - Later
3. JohnB - Early
4. Dunnlor - Later
5. Fredflanagan - early
6. Wayne - Later
7. NSR-250 - Later
8. Wienlot - Early
10. Cliff - Early
11. Nicowalker1 - Early
12. lotustonybassplayer - Later
13. Jimbo - Early
14.
15.
16.
17.
18.
19.
20.

If you don't know how to join, just reply saying you want to be included and I will add you.
If you want more than one set, add your name multiple times. It makes the math easier later on.
Thank you.

[JIMBO]

early set for me please
Jim

[Ladythorpe2]

Re: "B" Post Caps - How many need replacements?

by Brit-Car-Nut » Mon 19.11.2012, 17:19

I am looking into having the tooling made to reproduce the "B" Post caps used on the M100.
I am aware that there are two styles with different hinge designs and I hope to offer both styles.
Can you please let me know if you are interested in a PAIR and if you require the early or later design.
If you don't know which design you need, here are some pictures:



Early Style on the left and Later Style on the right

The later style uses a hinge with an embedded hinge that is pop-riveted at the two holes. Right now those are not available, so you will need to re-use your existing hinges.
I will look into finding a source for those too, but right now, I need to know if there is enough demand to run this project.
This is a non-commitment list. You are under no obligation to buy but without knowing the demand, I can't decide how many to make and how to price them.
NO MONEY will be collected until the parts are ready to ship and will most likely be posted from both the US and the UK.
I want them to be as affordable as possible and that comes when we spread the total cost across the most sales (Like the escutcheon project)

Please join in:

1. Brit-Car-Nut - Later
2. DeanG - Later
3. JohnB - Early
4. Dunnlor - Later
5. Fredflanagan - early
6. Wayne - Later
7. NSR-250 - Later
8. Wienlot - Early
10. Cliff - Early
11. Nicowalker1 - Early
12. lotustonybassplayer - Later
13. Jimbo - Early
14.Ladythorpe2 - Later
15.
16.
17.
18.
19.
20.

If you don't know how to join, just reply saying you want to be included and I will add you.
If you want more than one set, add your name multiple times. It makes the math easier later on.
Thank you.

Last edited by Brit-Car-Nut on Mon 19.11.2012, 18:28, edited 1 time in total.

John C.
M100 - 1991 Fed
Brit-Car-Nut

[TrevorB]

Please join in:

1. Brit-Car-Nut - Later
2. DeanG - Later
3. JohnB - Early
4. Dunnlor - Later
5. Fredflanagan - early
6. Wayne - Later
7. NSR-250 - Later
8. Wienlot - Early
10. Cliff - Early
11. Nicowalker1 - Early
12. lotustonybassplayer - Later
13. Jimbo - Early
14.Ladythorpe2 - Later
15. TrevorB - Later
16.
17.
18.
19.
20.

[Nobby]

Please join in:

1. Brit-Car-Nut - Later
2. DeanG - Later
3. JohnB - Early
4. Dunnlor - Later
5. Fredflanagan - early
6. Wayne - Later
7. NSR-250 - Later
8. Wienlot - Early
10. Cliff - Early
11. Nicowalker1 - Early
12. lotustonybassplayer - Later
13. Jimbo - Early
14.Ladythorpe2 - Later
15. TrevorB - Later
16. Nobby - Later
17.
18.
19.
20.