Wireless ALDL interface

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Re: Wireless ALDL interface

Postby Monty » Thu 17.02.2005, 19:15

I haven`t even got a laptop yet :roll:
Last edited by Monty on Fri 14.10.2005, 15:54, edited 1 time in total.
Image
User avatar
Monty
Chunder King!
 
Posts: 7977
Joined: Sun 11.01.2004, 22:32
Location: Leeds

Re: Wireless ALDL interface

Postby 51mon » Thu 17.02.2005, 21:00

ESM, I thought the ALDL was 5v TTL?
User avatar
51mon
Enthusiast
 
Posts: 144
Joined: Tue 09.11.2004, 00:45
Location: Cheshire

Re: Wireless ALDL interface

Postby ESM » Thu 17.02.2005, 21:57

Ian Levy (the first guy to seriously look at the Elan ALDL) reckoned the Elan uses 12V over ALDL on his site. I must confess I've never tested the assertion by actually putting a scope on the port myself...
It takes 43 muscles to frown and 17 to smile, but it doesn't take any to sit on your arse with a blank look on your face.

Click on my WWW link for information on chips and ElanScan.
User avatar
ESM
God
 
Posts: 2441
Joined: Thu 17.04.2003, 10:08

Re: Wireless ALDL interface

Postby 51mon » Thu 17.02.2005, 22:06

ESM, <br><br>I'll see if I can borrrow a ascope from the Lab' and let you know, I seem to remeber reading that it's at about 12Hz<br><br>Simon
User avatar
51mon
Enthusiast
 
Posts: 144
Joined: Tue 09.11.2004, 00:45
Location: Cheshire

Re: Wireless ALDL interface

Postby ESM » Thu 17.02.2005, 22:24

Trouble is the ECU won't try to transmit anything unless you send a data request (there's no chatter from the Elan ECU) and you can't do that without a working interface...
It takes 43 muscles to frown and 17 to smile, but it doesn't take any to sit on your arse with a blank look on your face.

Click on my WWW link for information on chips and ElanScan.
User avatar
ESM
God
 
Posts: 2441
Joined: Thu 17.04.2003, 10:08

Re: Wireless ALDL interface

Postby grahamec » Fri 18.02.2005, 14:13

Alan I'll have a wireless one and sell my hard wired one on :D
User avatar
grahamec
Fanatic
 
Posts: 693
Joined: Tue 30.03.2004, 12:22
Location: Dumfriesshire

Re: Wireless ALDL interface

Postby ESM » Fri 18.02.2005, 17:25

Blimey six yes replies!  I'm gobsmacked :o
It takes 43 muscles to frown and 17 to smile, but it doesn't take any to sit on your arse with a blank look on your face.

Click on my WWW link for information on chips and ElanScan.
User avatar
ESM
God
 
Posts: 2441
Joined: Thu 17.04.2003, 10:08

Re: Wireless ALDL interface

Postby a5gcd » Sat 19.02.2005, 19:59

[quote author=grahame link=board=project;num=1108498419;start=15#25 date=02/18/05 at 05:13:47]Alan I'll have a wireless one and sell my hard wired one on :D[/quote]<br><br>A bit too pricey for my needs but I would be interested <br>in a good 2nd hand RS232 interface especially with an <br>ADDL connector
User avatar
a5gcd
Fanatic
 
Posts: 360
Joined: Tue 14.12.2004, 16:30
Location: Lower Broadheath, Worcester

Re: Wireless ALDL interface

Postby grahamec » Sat 19.02.2005, 20:09

Geoff<br>We'll se what ESM comes up with :)
User avatar
grahamec
Fanatic
 
Posts: 693
Joined: Tue 30.03.2004, 12:22
Location: Dumfriesshire

Re: Wireless ALDL interface

Postby ESM » Sat 19.02.2005, 22:22

Ok I bought a few bits to make a start on a wireless prototype. I've also bought bits for USB and RS232 interfaces that I'll try to make into interfaces for Donington.
It takes 43 muscles to frown and 17 to smile, but it doesn't take any to sit on your arse with a blank look on your face.

Click on my WWW link for information on chips and ElanScan.
User avatar
ESM
God
 
Posts: 2441
Joined: Thu 17.04.2003, 10:08

Re: Wireless ALDL interface

Postby Costas » Sat 19.02.2005, 22:29

You guys make me feel so stoopido! I have no idea what the fook you are talkin about!  :-[ ??? :o <br><br>
Exige S2 240 - Elan S2 Sh4rk (sold)
Power 362hp (437hp NOS)
FasteR Magazine: As far as we can tell, Sh4rk's engine will be one of the few things that will be still standing after a nuclear war!
Costas
God
 
Posts: 881
Joined: Mon 21.04.2003, 12:40
Location: Muscat, Oman

Re: Wireless ALDL interface

Postby ESM » Sat 19.02.2005, 22:39

Its mostly just knowing the jargon. There's not that much to ALDL interfaces when you get down to its just an invertion and a change in the voltage level.
It takes 43 muscles to frown and 17 to smile, but it doesn't take any to sit on your arse with a blank look on your face.

Click on my WWW link for information on chips and ElanScan.
User avatar
ESM
God
 
Posts: 2441
Joined: Thu 17.04.2003, 10:08

Re: Wireless ALDL interface

Postby ESM » Thu 24.02.2005, 13:34

I stuck a voltmeter on the ALDL data line and set it to record the maximum. It came up with 4.92V (fortunately I modified my interface box to send 5V some time ago so that didn't mess up the maximum) . There's a slim possibility it samples over a longish period and this is value distorted but I'm inclined to believe the ECU outputs 5V - which is good news. I'll try a RS232 to TTL device to see if it fries or not....
It takes 43 muscles to frown and 17 to smile, but it doesn't take any to sit on your arse with a blank look on your face.

Click on my WWW link for information on chips and ElanScan.
User avatar
ESM
God
 
Posts: 2441
Joined: Thu 17.04.2003, 10:08

Re: Wireless ALDL interface

Postby ESM » Thu 24.02.2005, 13:39

Oh yeah and I've got the bits for the wireless prototype - I think it'll work.....
It takes 43 muscles to frown and 17 to smile, but it doesn't take any to sit on your arse with a blank look on your face.

Click on my WWW link for information on chips and ElanScan.
User avatar
ESM
God
 
Posts: 2441
Joined: Thu 17.04.2003, 10:08

Re: Wireless ALDL interface

Postby stevo » Thu 24.02.2005, 18:54

[smiley=duh.gif] ???are you talking about a dongle? :-/
arancio baby! thats italian for orange! i think?
User avatar
stevo
God
 
Posts: 1897
Joined: Mon 21.04.2003, 17:16
Location: Aboyne, royal deeside, scotland

Re: Wireless ALDL interface

Postby ESM » Fri 25.02.2005, 00:19

No but feel free to start  ::)
It takes 43 muscles to frown and 17 to smile, but it doesn't take any to sit on your arse with a blank look on your face.

Click on my WWW link for information on chips and ElanScan.
User avatar
ESM
God
 
Posts: 2441
Joined: Thu 17.04.2003, 10:08

Postby ESM » Wed 14.09.2005, 23:52

Having spent the last two days making normal USB interfaces, I found I was making the wireless prototype tonight without having really having planned to. Putting circuits into little boxes is habit forming in a mind numbingly dull sort of way.

I'll maybe try it tomorrow...
It takes 43 muscles to frown and 17 to smile, but it doesn't take any to sit on your arse with a blank look on your face.

Click on my WWW link for information on chips and ElanScan.
User avatar
ESM
God
 
Posts: 2441
Joined: Thu 17.04.2003, 10:08

Postby Sy V » Thu 15.09.2005, 08:12

We like the sound of this!
Image

Talk and song from tongues of lilting grace, sounds caress my ears but not a word I heard could I relay, the story was quite clear - Robert Plant

In Respectful Memory - 21st March 1959 - 14th February 2016
User avatar
Sy V
LEC Godfather
 
Posts: 5794
Joined: Mon 21.04.2003, 07:06
Location: Lydiate Ash, Bromsgrove, Worcestershire.

Postby TheBard » Wed 12.10.2005, 23:02

Is there an update on this, and if the ECU TTL was 5V is there an easy way to make the cable, as I fancy a play with the ElanScan software, and just need a cable...
Waiting excitedly for more tech chatter...
Ian
Ford Fiesta Mk2, VW Polo, Golf GTi, Lotus Elan, Honda Accord Coupe V6.

Calypso Red Cali #7683 - Bought at 29,000 miles, and sold at 75,000miles.
User avatar
TheBard
Fanatic
 
Posts: 652
Joined: Sun 16.01.2005, 05:22
Location: Washington D.C.

Postby ESM » Thu 13.10.2005, 20:38

The update is I got it working for about 3 seconds then fried it.... a £20 i.c. up in smoke :cry:

I ordered another two...
It takes 43 muscles to frown and 17 to smile, but it doesn't take any to sit on your arse with a blank look on your face.

Click on my WWW link for information on chips and ElanScan.
User avatar
ESM
God
 
Posts: 2441
Joined: Thu 17.04.2003, 10:08

PreviousNext

Return to Projects - Other (Minor)

Who is online

Users browsing this forum: No registered users and 3 guests