Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by chrisP » Sun 16.01.2011, 13:30
I have a mould for the cheater panels at the front of the doors that cover the screws that hold the door mirrors on. I'm looking to make some carbon fiber copies but in the meantime is there any call for copies made of glassfiber? They would be finished in a black satin paint and be ready to glue your existing rubber trim to. Does anyone know if these are still available from Lotus? Approximate cost would be £20 per pair posted in the uk.
Regards
Chris
You do not have the required permissions to view the files attached to this post.
-

chrisP
- Fanatic
-
- Posts: 639
- Joined: Fri 13.06.2003, 12:28
- Location: Hertfordshire
by kenich » Sun 16.01.2011, 13:54
They were on the lotus after sales list. I ordered a set throught Specky if it all goes ahead ok.
I would love a set in Carbon though

-

kenich
- Fanatic
-
- Posts: 413
- Joined: Sun 02.08.2009, 11:44
- Location: Wiltshire
by esprit888 » Mon 17.01.2011, 01:07
I would also buy a set if available, sooner or later the OEMS will run out.
-

esprit888
- God
-
- Posts: 957
- Joined: Fri 31.10.2008, 18:56
- Location: Lotus Land-Canada
by tweetdriver63 » Mon 17.01.2011, 06:20
Mine are a bit knackered. I'll wait for the carbon fibre ones though.
Chris
______________________________________
'91 Elan SE
'04 MB C230 Sport Coupe
'08 Mercury Mariner Hybrid
'12 Evora S GP Edition (In my dreams - HA!)
-

tweetdriver63
- God
-
- Posts: 2688
- Joined: Tue 07.08.2007, 17:12
- Location: Mississippi,USA
by chrisP » Tue 18.01.2011, 00:38
Thanks for the replies, the glassfiber ones are easier to make, but the first carbon ones didn't come out too bad... just have a bit of refining to do.
Chris
You do not have the required permissions to view the files attached to this post.
-

chrisP
- Fanatic
-
- Posts: 639
- Joined: Fri 13.06.2003, 12:28
- Location: Hertfordshire
by esprit888 » Tue 18.01.2011, 02:02
chrisP wrote:Thanks for the replies, the glassfiber ones are easier to make, but the first carbon ones didn't come out too bad... just have a bit of refining to do.
Chris
They look pretty good, cant be any worse than OEM ! Will look great with my CF escutcheons, seat protectors, gear shift, gear knob etc

-

esprit888
- God
-
- Posts: 957
- Joined: Fri 31.10.2008, 18:56
- Location: Lotus Land-Canada
by tweetdriver63 » Tue 18.01.2011, 15:41
esprit888 wrote:chrisP wrote:Thanks for the replies, the glassfiber ones are easier to make, but the first carbon ones didn't come out too bad... just have a bit of refining to do.
Chris
They look pretty good, cant be any worse than OEM ! Will look great with my CF escutcheons, seat protectors, gear shift, gear knob etc

Same here.
Chris
______________________________________
'91 Elan SE
'04 MB C230 Sport Coupe
'08 Mercury Mariner Hybrid
'12 Evora S GP Edition (In my dreams - HA!)
-

tweetdriver63
- God
-
- Posts: 2688
- Joined: Tue 07.08.2007, 17:12
- Location: Mississippi,USA
by andyp » Wed 19.01.2011, 18:55
Chris, I think you would get a lot of interest if you could re-manufacture the B-post caps................................
'56 Dodge Town Wagon
'69 Elan +2
'70 Elan S4
'89 Elan SE
'94 911C2
-

andyp
- Newbie
-
- Posts: 34
- Joined: Mon 12.05.2008, 12:39
- Location: Warwickshire
by chrisP » Thu 20.01.2011, 15:15
Hi Andy, it's probably something I could do fairly easily. I thought there was someone else that was working on them though? Do you think that the caps should be made in carbon or glassfiber?
Chris
-

chrisP
- Fanatic
-
- Posts: 639
- Joined: Fri 13.06.2003, 12:28
- Location: Hertfordshire
by rip » Fri 18.02.2011, 10:31
I am sure there are many like myself who will be willing to pay the extra for CF rather than GF for items such as these.
1990 SE
-

rip
- God
-
- Posts: 5904
- Joined: Sun 08.04.2007, 07:48
- Location: Milton Keynes, UK
by theelanman » Fri 18.02.2011, 11:04
Id have some in CF...

I’m normally not a praying man, but if you’re up there, please save me, Superman.
-

theelanman
- Moderator
-
- Posts: 7296
- Joined: Fri 30.04.2004, 15:52
- Location: peak district
-
by abmunro » Fri 18.02.2011, 13:53
B post caps are available from Lotus dealer
I bought some not so long back.
Tony
91 Elan SE 24k miles, 270 BHP @ 1.25 barg. Roll hoops + fairings+ speed humps Elise lights. S2 alloys. Nitrons& Eibachs,AP's front & Hi Spec rear brakes
-

abmunro
- God
-
- Posts: 1726
- Joined: Wed 18.04.2007, 22:46
- Location: Chester-Le-Street, Co Durham.
by theelanman » Fri 18.02.2011, 15:10
ok........
confused again......id like some cf cheater/mirror mount backs.....
lol....

I’m normally not a praying man, but if you’re up there, please save me, Superman.
-

theelanman
- Moderator
-
- Posts: 7296
- Joined: Fri 30.04.2004, 15:52
- Location: peak district
-
by chrisP » Tue 27.05.2014, 12:54
And finally after a long long time, I have made new better quality parts and a mold to go with them. There are a few small air bubbles but all in all a great finish.
You do not have the required permissions to view the files attached to this post.
-

chrisP
- Fanatic
-
- Posts: 639
- Joined: Fri 13.06.2003, 12:28
- Location: Hertfordshire
by Jon » Tue 27.05.2014, 12:58
Can you make more? How much would they be?
-

Jon
- Fanatic
-
- Posts: 250
- Joined: Mon 12.05.2003, 08:54
by theelanman » Wed 28.05.2014, 10:18
I’m normally not a praying man, but if you’re up there, please save me, Superman.
-

theelanman
- Moderator
-
- Posts: 7296
- Joined: Fri 30.04.2004, 15:52
- Location: peak district
-
by rip » Wed 28.05.2014, 15:07
I like them too.
1990 SE
-

rip
- God
-
- Posts: 5904
- Joined: Sun 08.04.2007, 07:48
- Location: Milton Keynes, UK
by Enright » Wed 28.05.2014, 15:58
Very nice Chris - also interested in further details.
Striking fear into the hearts of duplicate posts everywhere...!
BCingU,
Neil

-

Enright
- Modificator
-
- Posts: 4860
- Joined: Sun 19.12.2004, 19:21
- Location: Arnold, Nottingham, England
by chrisP » Wed 04.06.2014, 12:25
Hi thanks for the messages!! Yes I can make more of these, probably a pair a week at the moment (as the restoration of the Elan is taking time) As for price they would be around the £40 per pair - let me know if you are interested in a pair. I'm just in the process of taking the rubber surround off the old pair and gluing them on to the new pair.
Chris
-

chrisP
- Fanatic
-
- Posts: 639
- Joined: Fri 13.06.2003, 12:28
- Location: Hertfordshire
by Jon » Wed 04.06.2014, 12:32
Yes, I'll take a pair when you have them ready - thanks Chris.
-

Jon
- Fanatic
-
- Posts: 250
- Joined: Mon 12.05.2003, 08:54
Return to Interior
Who is online
Users browsing this forum: No registered users and 9 guests