Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by brissey11 » Wed 17.06.2015, 16:41
Hi all has anybody had work done on there lotus m100 in the Southend-on-Sea and surrounding areas
,as i have problems with my electric windows not working (both)if so can anybody recommend a garage thanks guys.

-
brissey11
- Newbie
-
- Posts: 10
- Joined: Sat 26.11.2011, 12:27
by Elanlover » Wed 17.06.2015, 16:55
brissey11 wrote:Hi all has anybody had work done on there lotus m100 in the Southend-on-Sea and surrounding areas
,as i have problems with my electric windows not working (both)if so can anybody recommend a garage thanks guys.

I haven't (being on the other side of the pond) but someone might drop by shortly with a comment. But, perhaps you could explain your problem - a simple solution might be at hand.
I do whatever my Rice Crispies tell me to do
-

Elanlover
- Moderator
-
- Posts: 3513
- Joined: Fri 05.08.2005, 19:11
- Location: The Great White North
by epipete » Wed 17.06.2015, 17:07
If both aren't working then it suggests an electrical fault, the easiest place to check supply is in the switches both of which have a 20 amp feed, the common circuit is protected by a 50amp Maxi Fuse (D1) behind where the dashboard and centre console meet.
You do not have the required permissions to view the files attached to this post.
You know more than you think you know, just as you know less than you want to know. ... Oscar Wilde
-

epipete
- God
-
- Posts: 2415
- Joined: Wed 17.08.2011, 11:03
- Location: Chippenham
by brissey11 » Wed 17.06.2015, 17:23
Hi I have power to the switches as both lights light up when pressed .They were both working a bit slow but working until I had a brake servo fitted at a garage which I won't mention the name when I collected the car the windows failed to work not even a slight movement
-
brissey11
- Newbie
-
- Posts: 10
- Joined: Sat 26.11.2011, 12:27
by GeoffSmith » Wed 17.06.2015, 18:07
The light in the switches come from a different fused supply and maxifuse D1 is only used for the windows so Pete's advice is good.
Calypso Red S2 #417
USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
-

GeoffSmith
- Kitty Fiddler
-
- Posts: 15628
- Joined: Fri 03.02.2006, 21:57
- Location: S2#417 in Tytherington, Gloucestershire
-
by brissey11 » Wed 17.06.2015, 18:25
Thanks didn't know about that will try that fuse tomorrow keeping fingers crossed.
-
brissey11
- Newbie
-
- Posts: 10
- Joined: Sat 26.11.2011, 12:27
by epipete » Wed 17.06.2015, 18:54
Whoa, hold your horses on that, those maxi fuses are a real bitch to get access to. You would probably be best to check the continuity at the 20amp fuses under the dash first.
image.jpg
It may be possible to access the maxi fuses via the Radio aperture but I e never tried.
Anyone else got any experience?
You do not have the required permissions to view the files attached to this post.
You know more than you think you know, just as you know less than you want to know. ... Oscar Wilde
-

epipete
- God
-
- Posts: 2415
- Joined: Wed 17.08.2011, 11:03
- Location: Chippenham
by brissey11 » Wed 17.06.2015, 19:27
Thanks for that I'll try that first
-
brissey11
- Newbie
-
- Posts: 10
- Joined: Sat 26.11.2011, 12:27
Return to Doors and Windows
Who is online
Users browsing this forum: No registered users and 5 guests