Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by Brit-Car-Nut » Wed 14.02.2018, 18:35
clemo wrote:Brit-Car-Nut wrote:Is that one of Phil's ( surfboardfiller)? He made one of the early full rear panels.
Nope . Phil's are 125mm these ones are 120mm light fittings.
I asked because the picture of the grey one looked like Phil's kitchen...
Please contact me via eMail, not by PM
-
Brit-Car-Nut
- God
-
- Posts: 4820
- Joined: Tue 03.07.2007, 17:07
- Location: Charlotte, NC USA
by clemo » Wed 14.02.2018, 18:56
Brit-Car-Nut wrote:clemo wrote:Brit-Car-Nut wrote:Is that one of Phil's ( surfboardfiller)? He made one of the early full rear panels.
Nope . Phil's are 125mm these ones are 120mm light fittings.
I asked because the picture of the grey one looked like Phil's kitchen...
I always wondered what Phil's kitchen looked like ..
( Sorry BCN thats an insert British humour here moment )
Jim Clark S2 - 1/12. The one with the Yellow spoke wheels . No 613 on dash (pushed in to factory in wrong order 615 on tub)
-
clemo
- LEC Administrator
-
- Posts: 5062
- Joined: Mon 21.04.2003, 23:24
- Location: TORQUAY Devon. Cream first then Jam obviously.
by Brit-Car-Nut » Wed 14.02.2018, 20:04
No problem, I was there a while ago and he helped me crate up the remains of the last M100 I had stored in Notts. That is why I thought it might be one of his early ones.
Please contact me via eMail, not by PM
-
Brit-Car-Nut
- God
-
- Posts: 4820
- Joined: Tue 03.07.2007, 17:07
- Location: Charlotte, NC USA
by chrisP » Fri 16.02.2018, 15:31
Sorry to say this, but the guy on ebay has blatantly copied one of my original moulds, i was making these quite a few years ago. I do some secondary moulding for the scalloped number plate cut out. That said, I am not in the position to make any at the moment (apart from one that is in process) due to time constraints - they take 25+ hours to make.
Cheers
Chris
You do not have the required permissions to view the files attached to this post.
-
chrisP
- Fanatic
-
- Posts: 633
- Joined: Fri 13.06.2003, 12:28
- Location: Hertfordshire
by britishsteel » Tue 27.02.2018, 21:38
clemo wrote:Margaret 65 ..
He had 2 of them . 1 has now been bought by BritishSteel on here.
seems another interesting take on our rear ends.
Your for cost ! If you want it
-
britishsteel
- Newbie
-
- Posts: 29
- Joined: Mon 01.09.2014, 09:07
- Location: Middlesbrough
Return to Hood/Top, Bodywork and Fittings
Who is online
Users browsing this forum: No registered users and 0 guests