Paint colour for grey plastic parts

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Paint colour for grey plastic parts

Postby Saltire » Sat 12.05.2018, 07:27

Morning all, I’ve a couple of places in the cockpit where the paint has worn off the plastic trim pieces - noticeably the top of the steering column cowl, which is a bit unsightly. Does anyone know what shade of paint was originally used for these parts (and yes, I realise it may have faded in the interim :? ), and where I can get an aerosol today?

Alternatively, has anyone tried to match it with a touch-up aerosol?

Thanks!
Jonathan

1995 Elan S2, BRG - Now sadly sold
Mrs Saltire’s 2021 Mini Countryman Cooper S
Mrs Saltire’s 2022 BMW i3S
User avatar
Saltire
God
 
Posts: 2457
Joined: Sun 05.04.2015, 22:27
Location: Left foot in Wiltshire, right foot in Gloucestershire, heart in Scotland

Re: Paint colour for grey plastic parts

Postby Jamie N » Sat 12.05.2018, 07:56

One option for getting a match on things with no known paint code is to take the part (if it's not too big) into Halfords
and just go along all the rows of paint checking against the coloured caps. ;-)
Monaco S2 #406

https://youtu.be/MGiyiIFjUew Rubbery stuff.
User avatar
Jamie N
Seal God
 
Posts: 1254
Joined: Wed 21.12.2005, 18:49
Location: Sunny Fife.

Re: Paint colour for grey plastic parts

Postby Steve A » Sat 12.05.2018, 08:07

What about autoglym bumper and trim gel ? that's stuffs magic on rubber :D
"If everything is under control, you are going too slow."
User avatar
Steve A
God
 
Posts: 2659
Joined: Tue 18.09.2007, 12:44
Location: South East Essex

Re: Paint colour for grey plastic parts

Postby Saltire » Sat 12.05.2018, 17:35

Jamie N wrote:One option for getting a match on things with no known paint code is to take the part (if it's not too big) into Halfords
and just go along all the rows of paint checking against the coloured caps. ;-)


Mom, I thought about that, Jamie, but a) I don’t have a Halfords within reasonable range and b) I’ve had expernces in the ast where the cap colour doesn’t match the paint colour. May have to go that way though.
Jonathan

1995 Elan S2, BRG - Now sadly sold
Mrs Saltire’s 2021 Mini Countryman Cooper S
Mrs Saltire’s 2022 BMW i3S
User avatar
Saltire
God
 
Posts: 2457
Joined: Sun 05.04.2015, 22:27
Location: Left foot in Wiltshire, right foot in Gloucestershire, heart in Scotland

Re: Paint colour for grey plastic parts

Postby Saltire » Sat 12.05.2018, 17:36

Steve A wrote:What about autoglym bumper and trim gel ? that's stuffs magic on rubber :D


Good thought, but I’m not sure it will put back paint that’s been worn off?
Jonathan

1995 Elan S2, BRG - Now sadly sold
Mrs Saltire’s 2021 Mini Countryman Cooper S
Mrs Saltire’s 2022 BMW i3S
User avatar
Saltire
God
 
Posts: 2457
Joined: Sun 05.04.2015, 22:27
Location: Left foot in Wiltshire, right foot in Gloucestershire, heart in Scotland

Re: Paint colour for grey plastic parts

Postby wayne » Sat 12.05.2018, 18:28

Apparently this matches, but I have no idea where to buy it from.

trim paint.JPG
You do not have the required permissions to view the files attached to this post.
1992 Pacific Blue, Top end performance Kit. K&N airfilter& HKS BOV. Everest. HiSpec fronts, SS hoses. 2010 Canyon red Evora.
http://www.elanm100.com
User avatar
wayne
God
 
Posts: 884
Joined: Fri 12.09.2003, 00:38
Location: Bahrain

Re: Paint colour for grey plastic parts

Postby lotusflasherman » Sat 12.05.2018, 20:15

Phil

Leave me alone, I think I know what I'm doing.
Cars: Subaru Forester 2.5XTN, Eclat Riviera, brace of Pacific Blue SE's, Collapso SE, Elan+2S.... and now an Evora
User avatar
lotusflasherman
God
 
Posts: 2533
Joined: Fri 05.09.2008, 00:14
Location: Hadleigh, 15m west of Ipswich or I may be 800 miles south (Cap d'Agde)

Re: Paint colour for grey plastic parts

Postby John_W » Sat 12.05.2018, 20:29

Whatever you do, don’t ask Halfords to mix up a matching paint for you. I think they give the mixing job to the colour-blind trainee. I still have a pot of specially-mixed paint which bears no resemblance to Pacific Blue. If you have a proper paint shop nearby, that’s a different matter - maybe take the part in and get them to match it?
John
User avatar
John_W
Heid-bummer
 
Posts: 3780
Joined: Mon 21.04.2003, 12:31
Location: Aberdeen

Re: Paint colour for grey plastic parts

Postby Bern » Sat 12.05.2018, 22:34

When I needed to match some paint recently I picked up some Dulux colour charts (that they use for the in-shop paint mixing).

Once I'd found the closest match I looked this up here to get the RAL code.

And then using the RAL code I was able to order some mixed cellulose from eBay!
'90 Elan SE
'95 MGF
'16 Renault Zoe
'03 VW Transporter
'72 Land Rover 88
'80ish Kubota B5100E
User avatar
Bern
Fanatic
 
Posts: 416
Joined: Sat 21.05.2016, 19:16
Location: Wells, Somerset, UK

Re: Paint colour for grey plastic parts

Postby lotusflasherman » Sun 13.05.2018, 01:45

If you want to deal with stone chips these guys are very good. Small pot of exact match paint with a brush inside for £10 ....https://www.cartouchuppaints.co.uk/KIT-1-Touch-Up-Paint-Matt-Finish

For my Pacific Blue '93 SE (made June '92) the Colour is "Pacific Blue (B08)" and the Colour Code is "DuPont ABN9144"
Phil

Leave me alone, I think I know what I'm doing.
Cars: Subaru Forester 2.5XTN, Eclat Riviera, brace of Pacific Blue SE's, Collapso SE, Elan+2S.... and now an Evora
User avatar
lotusflasherman
God
 
Posts: 2533
Joined: Fri 05.09.2008, 00:14
Location: Hadleigh, 15m west of Ipswich or I may be 800 miles south (Cap d'Agde)

Re: Paint colour for grey plastic parts

Postby Saltire » Sun 13.05.2018, 07:47

Thanks everybody. I followed up Wayne’s suggestion, and eventually tracked some down . . . on Amazon UK :smt107 The price was reasonable, but postage was extortionate, so I bought three cans to help justify the purchase :oops:

Give me a shout if you want one.

Will update this thread once it’s arrived and I’ve tried it.
Jonathan

1995 Elan S2, BRG - Now sadly sold
Mrs Saltire’s 2021 Mini Countryman Cooper S
Mrs Saltire’s 2022 BMW i3S
User avatar
Saltire
God
 
Posts: 2457
Joined: Sun 05.04.2015, 22:27
Location: Left foot in Wiltshire, right foot in Gloucestershire, heart in Scotland

Re: Paint colour for grey plastic parts

Postby dolmerob » Tue 22.05.2018, 09:19

Sounds like a plan. Post some pictures once you're done.
dolmerob
Newbie
 
Posts: 38
Joined: Tue 24.04.2018, 03:16

Re: Paint colour for grey plastic parts

Postby maz_r » Tue 22.05.2018, 10:02

Hi Jonathan,

Did it arrive? Does your offer of a spare can still stand, in which case, I shall be at CC...... :)
There are 10 kinds of people in the world; those that understand binary.....
User avatar
maz_r
Binary Bodger
 
Posts: 741
Joined: Sun 05.07.2009, 20:36
Location: Solihull, West Midlands

Re: Paint colour for grey plastic parts

Postby Rambo » Tue 22.05.2018, 12:44

Bern wrote:When I needed to match some paint recently I picked up some Dulux colour charts (that they use for the in-shop paint mixing).

Once I'd found the closest match I looked this up here to get the RAL code.

And then using the RAL code I was able to order some mixed cellulose from eBay!


If you want an identical colour, RAL codes are the way to go
User avatar
Rambo
Don't push me
 
Posts: 9144
Joined: Wed 24.12.2003, 00:37
Location: Both sides of the Tweed

Re: Paint colour for grey plastic parts

Postby Saltire » Tue 22.05.2018, 22:28

maz_r wrote:Hi Jonathan,

Did it arrive? Does your offer of a spare can still stand, in which case, I shall be at CC...... :)


Yes. And I have tried it. And it matches perfectly. And I will be at CC also . . . . . :twisted:

On the side issue, Rambo is right; RAL codes are the way to go . . . . Provided you know the RAL code you’re trying to match :cry:
Jonathan

1995 Elan S2, BRG - Now sadly sold
Mrs Saltire’s 2021 Mini Countryman Cooper S
Mrs Saltire’s 2022 BMW i3S
User avatar
Saltire
God
 
Posts: 2457
Joined: Sun 05.04.2015, 22:27
Location: Left foot in Wiltshire, right foot in Gloucestershire, heart in Scotland


Return to Interior

Who is online

Users browsing this forum: No registered users and 5 guests