Dave Thomas' problem at 4000RPM

Moderators: theelanman, dapinky, Specky, Dave Eds, DaveT, Elanlover, Nige, muley, Enright, Sy V, algirdas, nitroman, clemo, GeoffSmith

Dave Thomas' problem at 4000RPM

Postby Dave Thomas » Sun 03.05.2020, 22:47

Dave Thomas
Newbie
 
Posts: 25
Joined: Fri 10.04.2020, 17:11
Location: Sutton Coldfield, West Midlands

Re: ElanScan Interface

Postby Fredjohn » Mon 04.05.2020, 07:48

Dave Thomas wrote:I hope this works
BW
Dave
https://dl-mail.aolmail.com/ws/download ... 4rSSjwoc6v


This link asks me to sign in to an AOL mail account, which I don't have. Did you try to zip your .ecu file and attach it to your post?
La vie passe vite: vivez la avec elan(s).

Elan S4 DHC 1969
Elan SE turbo 1992
Evora 2010
MB CLK 320CDi 2007
Boardman Endurance SLR 9.4 disc carbon road bike
Swift Sundance Lifestyle 500
User avatar
Fredjohn
God
 
Posts: 1895
Joined: Tue 21.08.2012, 00:30
Location: Malvern, Worcs

Re: ElanScan Interface

Postby Dave Thomas » Mon 04.05.2020, 11:51

Once again, after login issues.....Zip file
It says uploaded file is empty .... lets see
Dave
Dave Thomas
Newbie
 
Posts: 25
Joined: Fri 10.04.2020, 17:11
Location: Sutton Coldfield, West Midlands

Re: ElanScan Interface

Postby Dave Thomas » Mon 11.05.2020, 15:04

Posted this elsewhere on the forum, this is just a PDF of the elanscan data.
BW
Dave
You do not have the required permissions to view the files attached to this post.
Dave Thomas
Newbie
 
Posts: 25
Joined: Fri 10.04.2020, 17:11
Location: Sutton Coldfield, West Midlands

Re: ElanScan Interface

Postby Dave Thomas » Wed 20.05.2020, 17:41

Thanks for help and advice so far. Now have half an hours data from a warm driven car still cutting out injerctors at around 4000 revs.
I would value any advice / suggestions from elanscan experts!
BW
Dave
You do not have the required permissions to view the files attached to this post.
Dave Thomas
Newbie
 
Posts: 25
Joined: Fri 10.04.2020, 17:11
Location: Sutton Coldfield, West Midlands

Re: ElanScan Interface

Postby RonR » Thu 21.05.2020, 20:50

Hi Dave,

Looks like you have a problem with your Coolant Temperature Sensor - Fault Code 16 (CTS low) after 75.3 seconds + Coolant Temperature = -39 Deg C for the whole run.

Have a look on the Wiki Here for info on the CTS.

Edit: I see I've been beaten to it on the other thread!
User avatar
RonR
Enthusiast
 
Posts: 166
Joined: Mon 22.08.2016, 20:25
Location: Bromley

Re: ElanScan Interface

Postby Dave Thomas » Fri 22.05.2020, 10:23

Thank you Ron
Am awaiting a replacement as it was registering a voltage to the single wire. I was getting 12V rather than the 5V it mentions in the handbook. We will see when the sensor is replaced.
BW
Dave
Dave Thomas
Newbie
 
Posts: 25
Joined: Fri 10.04.2020, 17:11
Location: Sutton Coldfield, West Midlands


Return to ElanScan

Who is online

Users browsing this forum: No registered users and 0 guests