Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by Jamie N » Wed 03.12.2014, 13:42
Just wondering if anyone has attempted this one for themselves yet?

, I would be surprised if not, as this has to be one of the more difficult seals to get for our little gems and this replacement for it is a worthy contender, Its really not that difficult a job and the difference it makes aesthetically alone is well worth the effort.
Maybe come the Spring the fettlers will be a bit more inspired.

-

Jamie N
- Seal God
-
- Posts: 1254
- Joined: Wed 21.12.2005, 18:49
- Location: Sunny Fife.
by dapinky » Wed 03.12.2014, 13:58
Still not got mine back from the painters - but I will be doing it as soon as I have the shell / doors together - and will update the thread with my experiences!
Dave
Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it
...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
-

dapinky
- LEC Administrator
-
- Posts: 10605
- Joined: Sun 15.10.2006, 12:54
- Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).
by Megwenda » Wed 03.12.2014, 14:16
Hi Jamie
Yup, I think I will only do this in Spring..... with temps now down below 5ºC, fettling is not a option
But, I have had a look, and it should be no problem fitting them.
mfG
Dave
-

Megwenda
- Enthusiast
-
- Posts: 201
- Joined: Thu 07.02.2013, 11:51
- Location: Switzerland
by Jamie N » Wed 03.12.2014, 14:36
Megwenda wrote:Hi Jamie
Yup, I think I will only do this in Spring..... with temps now down below 5ºC, fettling is not a option
But, I have had a look, and it should be no problem fitting them.
mfG
Dave
5 degrees?, positively balmy mate!, it was near to minus 5 here last night and I was in the garage fettling away until 11pm and no heating on either

, aye we are a tougher bunch us Scots, or maybe just flippin mad

-

Jamie N
- Seal God
-
- Posts: 1254
- Joined: Wed 21.12.2005, 18:49
- Location: Sunny Fife.
by epipete » Wed 03.12.2014, 15:20
Jamie N wrote:Megwenda wrote:Hi Jamie
Yup, I think I will only do this in Spring..... with temps now down below 5ºC, fettling is not a option
But, I have had a look, and it should be no problem fitting them.
mfG
Dave
5 degrees?, positively balmy mate!, it was near to minus 5 here last night and I was in the garage fettling away until 11pm and no heating on either

, aye we are a tougher bunch us Scots, or maybe just flippin mad

But you Scots have, should you feel the need of its protection, developed the perfect antidote - to be taken in Dram measures as the chill bites. I used to take it with beer chasers as a cure for the common cold, mind you I had to wait til the following afternoon to decide if the medicine had worked.
You know more than you think you know, just as you know less than you want to know. ... Oscar Wilde
-

epipete
- God
-
- Posts: 2415
- Joined: Wed 17.08.2011, 11:03
- Location: Chippenham
by Jamie N » Wed 03.12.2014, 18:27
epipete wrote:Jamie N wrote:Megwenda wrote:Hi Jamie
Yup, I think I will only do this in Spring..... with temps now down below 5ºC, fettling is not a option
But, I have had a look, and it should be no problem fitting them.
mfG
Dave
5 degrees?, positively balmy mate!, it was near to minus 5 here last night and I was in the garage fettling away until 11pm and no heating on either

, aye we are a tougher bunch us Scots, or maybe just flippin mad

But you Scots have, should you feel the need of its protection, developed the perfect antidote - to be taken in Dram measures as the chill bites. I used to take it with beer chasers as a cure for the common cold, mind you I had to wait til the following afternoon to decide if the medicine had worked.
Aye indeed, ye canny beat a wee dram!. Pity im teetotal

.
-

Jamie N
- Seal God
-
- Posts: 1254
- Joined: Wed 21.12.2005, 18:49
- Location: Sunny Fife.
by Megwenda » Wed 03.12.2014, 19:35
Actually, I think you will find the Irish developed the antidode before the Scots
and, my personal preference is for a drop from the
oldest licenced distillery in the world, but I have been known to partake of Jamesons, Paddy's or Powers, and as a youngster even drank the Scottish dram's
-

Megwenda
- Enthusiast
-
- Posts: 201
- Joined: Thu 07.02.2013, 11:51
- Location: Switzerland
by fernandobueno » Tue 16.02.2016, 04:29
Jamie,
I have just bought an Elan S2 and need all the seals for it. Do you still sell it? Could you send me more information at
fbuenogt@gmail.com ? Thanks!
Elan S2 #322
-

fernandobueno
- Newbie
-
- Posts: 4
- Joined: Sun 24.01.2016, 14:41
- Location: Brazil
by donsladek » Wed 01.07.2020, 20:07
Jamie N wrote:After a fair bit of experimentation with different donor seals I have come to the decision that the best one for the job is from a Mitsubishi FTO.
Jaimie - At one point you thought the Toyota Celica Mk3 was a good possibility for donor seals. Since the Mitsubishi FTO wasn't imported to the USA, and Toyota sold a lot of Celicas in the States, I might give these a shot.
Any thoughts on the pitfalls of using these donor seals on our cars?
Thanks for all your support!
Don Sladek
Calypso Red '91 #37594
If everything seems under control, you're just not going fast enough - Mario Andretti
-

donsladek
- Fanatic
-
- Posts: 547
- Joined: Sun 07.08.2005, 22:19
- Location: New Berlin, Wisconsin USA
by dapinky » Wed 01.07.2020, 23:42
Thats the guy I linked to on the FB thread - £20 each, or £35 a pair.
Dave
Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it
...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
-

dapinky
- LEC Administrator
-
- Posts: 10605
- Joined: Sun 15.10.2006, 12:54
- Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).
by CallMeLegend » Thu 02.07.2020, 16:28
The guy has had a run of them in the last 24hrs, he's sold 4 sets........
-
CallMeLegend
- Fanatic
-
- Posts: 328
- Joined: Tue 26.05.2020, 08:42
- Location: Bristol
by CallMeLegend » Tue 15.12.2020, 11:16
I have a pair of FTO seals for sale, £35 posted.
-
CallMeLegend
- Fanatic
-
- Posts: 328
- Joined: Tue 26.05.2020, 08:42
- Location: Bristol
by RonR » Tue 15.12.2020, 14:12
PM sent.
-

RonR
- Fanatic
-
- Posts: 723
- Joined: Mon 22.08.2016, 20:25
- Location: Bromley
by wedig » Thu 11.02.2021, 22:11
Hi guys,
Not sure of this post is live as such but after following Jamie's advise I have finally found a FTO breaker on ebay. I have a pair on order for £35 inc delivery. 2 other sellers have them so if your looking at the door seal then get them ordered as am sure the FTO will die off rather than become a long term classic.
Elan SE 1992
Mazda RX8 2004
Ford Focus ST 2020
Ford Transit Trail 2021
Bobcat E10 2020
-

wedig
- Newbie
-
- Posts: 17
- Joined: Sun 30.09.2018, 12:35
- Location: Bottesford
-
by wedig » Wed 17.02.2021, 20:33
So the new or old used seals turned up today from a FTO hoping to get them sized up this weekend. Condition is fantastic for the money so buy them while you can!! Just hope I can make it all fit as well as Jamie has done.
Elan SE 1992
Mazda RX8 2004
Ford Focus ST 2020
Ford Transit Trail 2021
Bobcat E10 2020
-

wedig
- Newbie
-
- Posts: 17
- Joined: Sun 30.09.2018, 12:35
- Location: Bottesford
-
by texas2201 » Fri 10.11.2023, 14:43
I know it was a long time ago - but how did you guys get on with the FTO door seals? DOH!!!! just went to the previous page and read Jamies write up with pics.......
"brakes are no good - they just slow you down" Fangio

-

texas2201
- God
-
- Posts: 1379
- Joined: Fri 30.06.2006, 17:24
- Location: Boos Eifel Germany
Return to Hood/Top, Bodywork and Fittings
Who is online
Users browsing this forum: No registered users and 2 guests