Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by roy666 » Tue 20.06.2023, 13:02
Hi all - has anyone had the same issue - the inner lip (edge) around the boot (bit which the seal is clipped on) has snapped; however, only in the front area near the lock (constant dragging of bags in and out I suppose). I'm thinking do I really need to do a fiberglass repair here... or can I just stick down a new seal of some sort directly to the surround? Advice gratefully accepted.. Mike
You do not have the required permissions to view the files attached to this post.
-

roy666
- Fanatic
-
- Posts: 340
- Joined: Thu 10.02.2011, 22:38
- Location: Stamford, Lincs
by Tuga2112 » Tue 20.06.2023, 13:18
roy666 wrote:Hi all - has anyone had the same issue - the inner lip (edge) around the boot (bit which the seal is clipped on) has snapped; however, only in the front area near the lock (constant dragging of bags in and out I suppose). I'm thinking do I really need to do a fiberglass repair here... or can I just stick down a new seal of some sort directly to the surround? Advice gratefully accepted.. Mike
im confused.
why are you talking about a fibreglass repair ? i cant see any fibreglass damage in the picture ?
-

Tuga2112
- God
-
- Posts: 3039
- Joined: Fri 12.09.2014, 22:54
- Location: Durham with a regular trip to Walsall
by dapinky » Tue 20.06.2023, 13:58
Mike,
I had this on mine - I did a repair with resin and mat - just a single thickness, nowt too difficult/exact - by the time I pushed the seal back on it wasn't visible (repair applied to inside edge) at all. Mine was caused by putting a plastic crate full of camping stuff in and out of the boot, and resting it on the edge..... easily done, but easily fixed!
Dave
Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it
...oh, and a 2006 Freelander destined for the jungles of The Gambia - 4500 miles across roads, desert and tracks - what could possibly go wrong?
-

dapinky
- LEC Administrator
-
- Posts: 10605
- Joined: Sun 15.10.2006, 12:54
- Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).
by roy666 » Wed 21.06.2023, 12:23
Thanks Dave - I think I will give it a go. I thought perhaps reinforcing/support that edge with a fibreglass strip of some sort; I'll let you know how it goes.
Tuga - the thin edge bit (for want of a better description), which the seal clips onto, has been snapped off in the picture; its flush with the surround of the boot. cheers M
-

roy666
- Fanatic
-
- Posts: 340
- Joined: Thu 10.02.2011, 22:38
- Location: Stamford, Lincs
Return to Hood/Top, Bodywork and Fittings
Who is online
Users browsing this forum: No registered users and 2 guests