My drivers seat has suddenly stopped being able to be adjusted. The large round wheel simply spins without any adjustment to the seat angle. I could not find anything on this mechanism in my work shop manual.
Anybody had something similar and solved it?
| Home | WikiLEC | Repairs | Upgrades | Gallery | Buy & Sell | Mountain Chips | Meets & Events | Contact |
|
Seat back adjustment
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
4 posts
• Page 1 of 1
Seat back adjustment
by mikecg » Mon 02.06.2025, 19:37
-
mikecg - Enthusiast
- Posts: 123
- Joined: Tue 29.12.2015, 15:11
- Location: Horley, Surrey
Re: Seat back adjustment
by TorqueHorse » Mon 02.06.2025, 20:03
Yeah, you pop off the center plastic and tighten up the C clip so it engages the plastic. Great video on it here
https://youtu.be/-AQqQ4RqTAg?si=Qm8KG5v75rYXwqOv
https://youtu.be/-AQqQ4RqTAg?si=Qm8KG5v75rYXwqOv
-Matt N
'91 FED M100 -rolling resto
...and come to Salt Lake City, for the very first truly national Lotus Car Club event for the USA: LUG September 24-28, 2026
'91 FED M100 -rolling resto
...and come to Salt Lake City, for the very first truly national Lotus Car Club event for the USA: LUG September 24-28, 2026
-
TorqueHorse - Fanatic
- Posts: 723
- Joined: Wed 01.01.2020, 07:42
- Location: Austin, TX
Re: Seat back adjustment
by mikecg » Tue 03.06.2025, 15:53
All fixed, it appeared that the 10mm bolt on the knob was loose so that the washer with the flats had come away from its slot in the knob. Fiddly but easy to fix and now working again.
Mike
Mike
-
mikecg - Enthusiast
- Posts: 123
- Joined: Tue 29.12.2015, 15:11
- Location: Horley, Surrey
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 5 guests