Main Dash Removal - not centre console - SOLVED

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Main Dash Removal - not centre console - SOLVED

Postby AJSGSE1990 » Tue 12.05.2026, 09:19

Good morning, bit stuck on the removal of the main dash. Have found the bolts that fit either side at the height of the A Pillar body panel, the one to the right of the glovebox fitting to the round cross member, and the screws just fore of the gearstick.

Now had a look in the engine bay, and a good feel but it almost feels like the leading edge of the dash is bonded to the bottom of the screen. Have I missed something really obvious?

Thank you,

Andrew.

WhatsApp Image 2026-05-12 at 08.44.44 (Small).jpeg


EDIT: Now solved, the screen vents actually hold the dash in place.

WhatsApp Image 2026-05-12 at 10.19.35 (Small).jpeg
You do not have the required permissions to view the files attached to this post.
User avatar
AJSGSE1990
Tinkerer
 
Posts: 95
Joined: Fri 16.01.2026, 15:16
Location: Great Saling, Essex, United Kingdom

Re: Main Dash Removal - not centre console - SOLVED

Postby peter canepa » Tue 14.07.2026, 19:38

Glad to hear. Now if you have a Fed one, we have a bolster under the steering wheel. To keep you from sliding under the wheel in a front collision. Any idea on how to remove it, so I can get the center switch portion of the dash out? I want to add a new switch, to fill in those blanks.
Damm this car looks good
User avatar
peter canepa
Enthusiast
 
Posts: 110
Joined: Sun 26.02.2006, 23:22
Location: Santa Cruz California

Re: Main Dash Removal - not centre console - SOLVED

Postby TorqueHorse » Wed 15.07.2026, 21:30

peter canepa wrote:Glad to hear. Now if you have a Fed one, we have a bolster under the steering wheel. To keep you from sliding under the wheel in a front collision. Any idea on how to remove it, so I can get the center switch portion of the dash out? I want to add a new switch, to fill in those blanks.


In one of the service manuals, the SIR one here, it has info on the knee bolster. It's got two threaded rods that go straight back and are held in by a nut. I think it is an 10mm socket or wrench you will need, and it is a very deep threaded rod, so it takes forever with a wrench. There is a reason I've never threaded the nuts back on mine :lol:

But for some tips on the actual goal you are trying to achieve, you can access the blanks via the glovebox side (just loosen the glovebox stopper, or you might be able to flex it so it falls past). You can then push out the cigarette ashtray holder from the back (you need to pull the ashtray out first I think) and that will give you an extra access point. You can then push out the blanks as well from the back.
-Matt N
'91 FED M100 -rolling resto

...and come to Salt Lake City, for the very first truly national Lotus Car Club event for the USA: LUG September 24-28, 2026
User avatar
TorqueHorse
Fanatic
 
Posts: 723
Joined: Wed 01.01.2020, 07:42
Location: Austin, TX

Re: Main Dash Removal - not centre console - SOLVED

Postby peter canepa » Thu 16.07.2026, 18:07

Wow, never thought of that. (Glovebox) Thanks, I'm on it. Salt Lake City, I'll give it some thought
Damm this car looks good
User avatar
peter canepa
Enthusiast
 
Posts: 110
Joined: Sun 26.02.2006, 23:22
Location: Santa Cruz California


Return to Interior

Who is online

Users browsing this forum: No registered users and 5 guests