Basic guide to using Elanscan

[Scotelan]

Afternoon All

I recently purchased an Elanscan cable from Jaoa to try to establish a rich running at idle problem.

I've scourged through the posts on here - Could someone point me to a Basic (Idiots) Guide to setting up the communication link to my Windows11 laptop?

Much obliged, Alan

[dapinky]

Hi Alan, and welcome to LEC - there are many threads about using Elanscan - but many are outdated as they were written when Windows XP was evolving to the 'new fangled' W7!....

.... however, this is the 'best' thread to start at, as it is probably the most recent (with what was current information when it was written).

viewtopic.php?f=34&t=30234

[Scotelan]

Hi Alan, and welcome to LEC - there are many threads about using Elanscan - but many are outdated as they were written when Windows XP was evolving to the 'new fangled' W7!....

.... however, this is the 'best' thread to start at, as it is probably the most recent (with what was current information when it was written).

viewtopic.php?f=34&t=30234

Thanks Dave, I certainly havent used Zip for yonks but it should come back to me but I can't for the life of me understand why I had to download X Box

[chrism]

Scotelan here's the 'EScan_beta' link from dapinky's post. This is the very latest version of EScan updated in 2024 by LEC 'gurus' and supercedes all others...

download/file.php?id=29899



Double-click on it and you'll get 'new Escan_beta and settings':-

Double-click to open it and you'll get these 4 elements:-

Open and run the two compressed files. I seem to remember that the word doc contains instr to update the old protocol for those who are updating from an older version. The .jpg file has typical settings that, I found, worked for me.

When first running 'EScan_beta' you might have to find your own comm port in 'device manager' and change the EScan comm box...

Hope this helps; I think that's it (but I haven't loaded this new version myself for ages ) loadsa luck

[Scotelan]

Scotelan here's the 'EScan_beta' link from dapinky's post. This is the very latest version of EScan updated in 2024 by LEC 'gurus' and supercedes all others...

download/file.php?id=29899



Double-click on it and you'll get 'new Escan_beta and settings':-

Double-click to open it and you'll get these 4 elements:-

Open and run the two compressed files. I seem to remember that the word doc contains instr to update the old protocol for those who are updating from an older version. The .jpg file has typical settings that, I found, worked for me.

When first running 'EScan_beta' you might have to find your own comm port in 'device manager' and change the EScan comm box...

Hope this helps; I think that's it (but I haven't loaded this new version myself for ages ) loadsa luck

Thank you, I've just seen your post. Setting the Comm port sorted it, I just need to sort out the graphing now. There's a surprising amount of information available for a 36 year old system!
#Thanks

[chrism]

Scotelan, EScan can start and stop talking as well as start and stop logging.

If you decide to log your data, when you stop logging you'll have the option of saving it. Once you open a saved log the graphs will load up into the window on the rhs of your Escan and you can choose from the parameters what particular aspect you'd like to inspect.

[Scotelan]

I have the current version of Elanscan, Comm port correctly set and the latency set to 1.
The left information section is getting populated when the engine is running (but empty with only the ignition on) but I cannot get the graph populated. It might be something simple that I've not "ticked" but it beyond my grey matter. The error log states "No reply/ No frame start byte received". I've clicked the talking and logging buttons but to no avail - any thoughts welcomed, thanks
https://1drv.ms/i/c/8a36c53dff317648/IQDeEfFKQDS8Tbtm9cK2tqKwAZ-tsi5Ez76p0cB_lUQ9fJs?e=fdWFGx