Drivetrain problems
Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by matt_elan » Wed 23.11.2005, 16:27
hi guys, i need help.. big time! 3 months ago some1 i no did my driveshaft seals. 2weeks ago my rear engine mount/plate broke. so i got some 1 decent 2 look at it. only 2 find that the monkey had sheared off 2 bolts that attach the mount 2 the bell housin, so he has drilled the holes out (in bell housing) and put 2 new bolts in. only not long enough. so the mount has snapped along with 2 of the guides on the gear box! bell housin is a mess....

only option here is 2 replace it. new bell housing is crazy money! so has any 1 got an old gear box or help me any way? hope u can help guys.....
regards
matt
-
matt_elan
- Tinkerer
-
- Posts: 80
- Joined: Sat 26.03.2005, 22:23
by Monty » Wed 23.11.2005, 16:50
Matt
were u based? I`ll be swapping my gearbox out next year sometimes the only thing wrong with it is the end bearings, which whine.
-

Monty
- Chunder King!
-
- Posts: 7977
- Joined: Sun 11.01.2004, 22:32
- Location: Leeds
by matt_elan » Wed 23.11.2005, 17:48
based at stansted, only thing is i need mine fixed asap

-
matt_elan
- Tinkerer
-
- Posts: 80
- Joined: Sat 26.03.2005, 22:23
by Doc Fizzix » Wed 23.11.2005, 18:10
Matt
I know where there are two for sale but the fellow wants alot
If you are real nice to the fellow he might cut you a deal.
Here it is:
http://www.sportscarworld.com
-

Doc Fizzix
- God
-
- Posts: 2281
- Joined: Thu 23.09.2004, 23:36
- Location: Deep in the heart of Texas
by matt_elan » Thu 24.11.2005, 09:05
i take it no 1 has an old box then?
-
matt_elan
- Tinkerer
-
- Posts: 80
- Joined: Sat 26.03.2005, 22:23
by Sy V » Thu 24.11.2005, 09:08
Matt
PM Mike Y, he may be able to source one, he found one for me.
Talk and song from tongues of lilting grace, sounds caress my ears but not a word I heard could I relay, the story was quite clear - Robert PlantIn Respectful Memory - 21st March 1959 - 14th February 2016
-

Sy V
- LEC Godfather
-
- Posts: 5794
- Joined: Mon 21.04.2003, 07:06
- Location: Lydiate Ash, Bromsgrove, Worcestershire.
by ESM » Thu 24.11.2005, 12:50
I will probably have the remains of my stuffed up box at some point in the not too distant future (not sure when). The bell housing should be ok, its the gears that are stuffed. I can find out about its condition if that's any help (its in a gearbox place in Leeds at the moment).
It takes 43 muscles to frown and 17 to smile, but it doesn't take any to sit on your arse with a blank look on your face.
Click on my WWW link for information on chips and ElanScan.
-

ESM
- God
-
- Posts: 2441
- Joined: Thu 17.04.2003, 10:08
-
by ESM » Thu 24.11.2005, 13:52
It turns out the box I mentioned above is in much better nick than I thought the 5th gear syncro was dragging but that's been sorted and it good to back in the car
The other gearbox I have has a bit of crunchy downshift into 3rd but its otherwise ok. I'm open to offers! Its sat on the bench in Foulds motors at the moment.
It takes 43 muscles to frown and 17 to smile, but it doesn't take any to sit on your arse with a blank look on your face.
Click on my WWW link for information on chips and ElanScan.
-

ESM
- God
-
- Posts: 2441
- Joined: Thu 17.04.2003, 10:08
-
by alan » Fri 25.11.2005, 14:39
i've currently got one sat in the garden shed. Second gear was a bit crunchy so i decided to have a brand new gearbox installed...
I'm close to Leatherhead, J9 M25 and open to offers...
email me on
ashort1@hotmail.com if you're interested
Cheers
A
-
alan
- Newbie
-
- Posts: 30
- Joined: Tue 22.04.2003, 11:48
- Location: Leatherhead, Surrey .... now in Houston, Texas
-
by Dico » Fri 25.11.2005, 19:36
matt_elan wrote:i take it no 1 has an old box then?
Yeah, so's his missus!!!!

4+ hours stuck in a damp bucket seat with a mad Irishman at the wheel - Deep joy!!!!
-

Dico
- Fool Boy Four - Founder
-
- Posts: 3569
- Joined: Mon 01.12.2003, 09:45
- Location: Moderator Manchester
Return to Transmission, and Clutch
Who is online
Users browsing this forum: No registered users and 0 guests