Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by Robbie » Mon 26.12.2005, 01:02
Does anyone have any advice on how to remove it?
A couple of kids tried with no sucess however the badge is partialy bent up and the image has cracked........I'll kill 'em when I get me hands on them!
Anyway saw a new badge for £16.00.......is this a fair price do you know?
Any help would be wonderful!
Cheers!
-
Robbie
- Tinkerer
-
- Posts: 64
- Joined: Tue 08.06.2004, 13:58
- Location: Liverpool
by Paul.P » Mon 26.12.2005, 01:17
Robbie, 1st, that is a very fair price for a new badge, not sure what the normal ones are, but the black & gold ones have just gone up to about £63 & i don't think the normal ones are far behind !. Badges are fixed by to black plastic screws, which screw onto the lugs that protrude from the badge & through the bonnet, so you need to undo them from underside of the bonnet. Hope this helps ?
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
-
Paul.P
- God
-
- Posts: 4970
- Joined: Sun 14.12.2003, 18:18
- Location: Oakham, Rutland
-
by cjay » Mon 26.12.2005, 03:27
If it's a metal badge for £16 and the screw holes line up it's a good deal. Mine was £52 and needed a bit of work to fit
If you live in a sunny part of the world don't get the plastic stick on ones they fade
And I agree, anyone caught trying to steal badges should get the death penalty!
cjay
-

cjay
- S2 #475
-
- Posts: 480
- Joined: Mon 15.11.2004, 12:31
- Location: Australia
-
by theelanman » Mon 26.12.2005, 03:31
but dont club lotus still sell them @£26?????
-

theelanman
- Moderator
-
- Posts: 7296
- Joined: Fri 30.04.2004, 15:52
- Location: peak district
-
by Paul.P » Mon 26.12.2005, 09:36
theelanman wrote:but dont club lotus still sell them @£26?????
If they do, i shall be pig sick ?
Can't understand why club lotus would sell them half the price of lotus themselves, also wouldn't think lotus would be very happy at that either, unless there of inferior quality ?

JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
-
Paul.P
- God
-
- Posts: 4970
- Joined: Sun 14.12.2003, 18:18
- Location: Oakham, Rutland
-
by John_W » Mon 26.12.2005, 10:19
-

John_W
- Heid-bummer
-
- Posts: 3780
- Joined: Mon 21.04.2003, 12:31
- Location: Aberdeen
-
by Robbie » Tue 27.12.2005, 22:44
Thanks for all of that info chaps!
The actual part number for this badge is A117U0170F which isn't the same part number which is on SJ's website, so I won't be purchasing that then!!
Again, thanks for your help!
-
Robbie
- Tinkerer
-
- Posts: 64
- Joined: Tue 08.06.2004, 13:58
- Location: Liverpool
by John_W » Tue 27.12.2005, 23:12
Robbie wrote:The actual part number for this badge is A117U0170F which isn't the same part number which is on SJ's website,
Robbie,
My parts book lists the Elan's nose-badge as A100U0178F. The number you quote (A117U0170F) sounds like it's from a MkII Elise (type 117), and therefore will be a plastic one with a different mounting.
SJ quote "NOSE BADGE A100U0178F @ £43.85 EACH" which sounds right to me. Didn't know anybody still had them in stock. Club lotus does a nose badge for £46.94 but the spacing of the screw pegs is unlikely to fit the Elan.
John
-

John_W
- Heid-bummer
-
- Posts: 3780
- Joined: Mon 21.04.2003, 12:31
- Location: Aberdeen
-
by Monty » Wed 28.12.2005, 13:51
I replaced mine with a Black/silver badge and had to drill the holes larger in the bonnet to make it fit

-

Monty
- Chunder King!
-
- Posts: 7977
- Joined: Sun 11.01.2004, 22:32
- Location: Leeds
by Dico » Wed 28.12.2005, 21:09
Rough @rse!

4+ hours stuck in a damp bucket seat with a mad Irishman at the wheel - Deep joy!!!!
-

Dico
- Fool Boy Four - Founder
-
- Posts: 3569
- Joined: Mon 01.12.2003, 09:45
- Location: Moderator Manchester
by timmo » Sat 31.12.2005, 02:25
yes, Monty showed it off at Stoneleigh - the badge that is!!
I wonder how much deeper the ocean would be without sponges.
-

timmo
- God
-
- Posts: 1109
- Joined: Sat 21.02.2004, 09:57
- Location: Windsor
by Monty » Sat 31.12.2005, 12:08
-

Monty
- Chunder King!
-
- Posts: 7977
- Joined: Sun 11.01.2004, 22:32
- Location: Leeds
Return to Hood/Top, Bodywork and Fittings
Who is online
Users browsing this forum: No registered users and 4 guests