Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by otter » Mon 08.08.2005, 19:02
Does any one have any info about fitting an oris windstop?
I remember an artical linked from the old board, but cant find it on the new one.
-
otter
- Newbie
-
- Posts: 24
- Joined: Mon 10.05.2004, 15:36
- Location: bristol
-
by surfboardfiller » Thu 12.01.2006, 23:05
I'm thinking of getting one and fitting it myself. Did you get the information on fitting?
Cheers,
Phil
-

surfboardfiller
- God
-
- Posts: 2857
- Joined: Sat 22.10.2005, 14:08
- Location: Somerset - England
by otter » Fri 13.01.2006, 02:20
nope, I did pick 1 up on the cheap, but as its now bolted on my friends mx5, i dont think I'm going to get a chance to fit it.
From a quick line up it didnt look too dificult to make it fit. I know other people have done it as well.
If you do do it let me know. id be intrested in seeing it actualy in place
Cheers
Rich
-
otter
- Newbie
-
- Posts: 24
- Joined: Mon 10.05.2004, 15:36
- Location: bristol
-
by Gary » Fri 13.01.2006, 23:29
HI otter,
I've fitted 2 of these. You are right that there was a write up on the old board(don't know where that is now). I did post some pics a while back I'll see if I can find them.
If you want any advice (or more pics) then let me know
Ex owner of S2 no 480 and Red SE
-

Gary
- God
-
- Posts: 2284
- Joined: Thu 14.07.2005, 18:04
- Location: Rutland
by Gary » Fri 13.01.2006, 23:40
Ex owner of S2 no 480 and Red SE
-

Gary
- God
-
- Posts: 2284
- Joined: Thu 14.07.2005, 18:04
- Location: Rutland
by surfboardfiller » Sat 14.01.2006, 18:24
otter wrote:nope, I did pick 1 up on the cheap, but as its now bolted on my friends mx5, i dont think I'm going to get a chance to fit it.
Cheers
Rich
I have had an email chat with a guy at 'Moss' in Bristol and he quoted me £109.94 including VAT for the Oris. I'll be off to get one on Monday (Opposite the M32 Service Station).
I'll let you know when I get it done.
Cheers,
Phil
-

surfboardfiller
- God
-
- Posts: 2857
- Joined: Sat 22.10.2005, 14:08
- Location: Somerset - England
by Gary » Sat 14.01.2006, 18:40
Again, if you want any advice let me know
Ex owner of S2 no 480 and Red SE
-

Gary
- God
-
- Posts: 2284
- Joined: Thu 14.07.2005, 18:04
- Location: Rutland
Return to Hood/Top, Bodywork and Fittings
Who is online
Users browsing this forum: No registered users and 12 guests