Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith
by taffy » Thu 26.01.2006, 22:03
I am thinking of changing the seats but noticed the seat belts are attached to the seat frame. How do you get around fitting the belt.
Thanks for any guidance
Lots of pain and little gain
-
taffy
- Enthusiast
-
- Posts: 100
- Joined: Tue 10.01.2006, 21:45
- Location: Leicestershire
-
by Sy V » Fri 27.01.2006, 09:23
Take it off the old seat and mount it on the new seat frame.
Talk and song from tongues of lilting grace, sounds caress my ears but not a word I heard could I relay, the story was quite clear - Robert PlantIn Respectful Memory - 21st March 1959 - 14th February 2016
-

Sy V
- LEC Godfather
-
- Posts: 5794
- Joined: Mon 21.04.2003, 07:06
- Location: Lydiate Ash, Bromsgrove, Worcestershire.
by taffy » Fri 27.01.2006, 11:26
That sounds too simple! Ther must be a harder way. I will let you know.Thanks
Lots of pain and little gain
-
taffy
- Enthusiast
-
- Posts: 100
- Joined: Tue 10.01.2006, 21:45
- Location: Leicestershire
-
by Dave M » Fri 27.01.2006, 17:51
There is also a body-to-frame bolt behind the seat (under the speaker mount thing) that can be used. I used it for the lap belt of my harness when I replaced my seat.
You do not have the required permissions to view the files attached to this post.
Rumors of my demise have been greatly exaggerated.
"Track Elan" Monaco White Elan / "Peely" Calypso Red Elan / 2007 Subaru Legacy GT-Cobb Tuned / 1993 Honda CBR600F2
-

Dave M
- God
-
- Posts: 937
- Joined: Mon 18.07.2005, 01:40
- Location: Ada, MI
by Sy V » Fri 27.01.2006, 18:06
Agreed Dave, but I think he'd need to find a buckle/receiver/female with a much longer arm to extend it into reach...assuming that he's going for the standard seat belt type.
Talk and song from tongues of lilting grace, sounds caress my ears but not a word I heard could I relay, the story was quite clear - Robert PlantIn Respectful Memory - 21st March 1959 - 14th February 2016
-

Sy V
- LEC Godfather
-
- Posts: 5794
- Joined: Mon 21.04.2003, 07:06
- Location: Lydiate Ash, Bromsgrove, Worcestershire.
by taffy » Fri 27.01.2006, 22:54
Thanks for information, been a big help. The main problem encountered was the runners on the new seat were 15 in apart and on the original only 13in. I have used the original seat runners and managed to make a frame to attach the seatto the original runner. (I had to remove the front bracket by taking the rivets out (A shape) I have kept it so that I can return to the original seats if ever need.
Do the passanger side tomorrow, should be a lot easier now I have done one.
Regards
Lots of pain and little gain
-
taffy
- Enthusiast
-
- Posts: 100
- Joined: Tue 10.01.2006, 21:45
- Location: Leicestershire
-
by BigErch » Mon 03.04.2006, 16:13
Sy V wrote:...assuming that he's going for the standard seat belt type.
What is the standard seatbelt type? My driver side will not rewind even after lubrication. Does anyone know where I can get a replacement without paying Lotus prices - it must be a standard part from lot's of cars?
cheers, Arch
-

BigErch
- Fanatic
-
- Posts: 323
- Joined: Tue 27.01.2004, 14:09
- Location: North of Embra
by Paul.P » Mon 03.04.2006, 19:49
BigErch wrote:What is the standard seatbelt type? My driver side will not rewind even after lubrication. Does anyone know where I can get a replacement without paying Lotus prices - it must be a standard part from lot's of cars?
cheers, Arch
Arch, standard seatbelts are no longer available !, think someone found a Nissan one that was very close & fitted, can anyone confirm this ?
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
-
Paul.P
- God
-
- Posts: 4970
- Joined: Sun 14.12.2003, 18:18
- Location: Oakham, Rutland
-
by Doug » Mon 03.04.2006, 20:39
here in CA Mark found the Infiniti (Nissan) J30 had the female/receiver end almost identical to the Elan's and he has them as a replacement. But I have never heard of a cross-reference for the belt/retractable end yet--though I'd bet a few exist.
-

Doug
- LEC Founder
-
- Posts: 7468
- Joined: Thu 17.04.2003, 06:43
- Location: Oregon Coast, USA
-
by Rambo » Tue 04.04.2006, 10:13
BigErch wrote:Sy V wrote:...assuming that he's going for the standard seat belt type.
What is the standard seatbelt type? My driver side will not rewind even after lubrication. Does anyone know where I can get a replacement without paying Lotus prices - it must be a standard part from lot's of cars?
cheers, Arch
Funny that Archie - mine's got a bit sticky lately - must be due to the Scottish damp weather !! I usually give mine a helping hand to retract then it's OK
Must have been a Vauxhall bin part though - Cavalier, Astra etc....??
Mark
-

Rambo
- Don't push me
-
- Posts: 9144
- Joined: Wed 24.12.2003, 00:37
- Location: Both sides of the Tweed
by BigErch » Tue 04.04.2006, 10:50
Rambo wrote:Funny that Archie - mine's got a bit sticky lately - must be due to the Scottish damp weather !! I usually give mine a helping hand to retract then it's OK
Yeah, it always was sticky but recently it siezed. I took it out and tried to free it up a little. Unfortunately it's completely bust now
Rambo wrote:Must have been a Vauxhall bin part though - Cavalier, Astra etc....??
You'd think so. I might remove it and take it to my local motor factor. They were very good in finding me a new alternator.
I'll keep u posted.
Arch
-

BigErch
- Fanatic
-
- Posts: 323
- Joined: Tue 27.01.2004, 14:09
- Location: North of Embra
by Jodie » Tue 04.04.2006, 21:17
Must have been a Vauxhall bin part though - Cavalier, Astra etc....??
Bold statement! What makes you say that??
-
Jodie
- Newbie
-
- Posts: 7
- Joined: Tue 04.04.2006, 19:46
by ab2cv » Tue 04.04.2006, 21:22
God wrote:Must have been a Vauxhall bin part though - Cavalier, Astra etc....??
Bold statement! What makes you say that??
Probably the fact that quite a lot of other interior and mechanical parts all have GM roots.
Alan
-

ab2cv
- Fanatic
-
- Posts: 619
- Joined: Wed 30.06.2004, 18:30
- Location: Edinburgh
by Jodie » Tue 04.04.2006, 21:46
Probably the fact that quite a lot of other interior and mechanical parts all have GM roots.
what about the other million companies that GM own? Why tie it to Vauxhall?
-
Jodie
- Newbie
-
- Posts: 7
- Joined: Tue 04.04.2006, 19:46
by Paul.P » Tue 04.04.2006, 22:00
If i remember right, these were made by an Australian company ?
JPS M100 was built from bare chassis up to create one off M100 in the mould of JPS Team Lotus
-
Paul.P
- God
-
- Posts: 4970
- Joined: Sun 14.12.2003, 18:18
- Location: Oakham, Rutland
-
by Doug » Tue 04.04.2006, 22:14
God, you should know the answer, right!
Also, I'm not too keen on your Forum name, unless you can prove me wrong. Luckily you can change it easily to something else in your Profile page. . .

-

Doug
- LEC Founder
-
- Posts: 7468
- Joined: Thu 17.04.2003, 06:43
- Location: Oregon Coast, USA
-
by Jodie » Tue 04.04.2006, 22:27
God, you should know the answer, right!
Also, I'm not too keen on your Forum name, unless you can prove me wrong. Luckily you can change it easily to something else in your Profile page. . .
Yes I do know the answer.
When you prove me wrong, Ill change my name!
-
Jodie
- Newbie
-
- Posts: 7
- Joined: Tue 04.04.2006, 19:46
by Doug » Tue 04.04.2006, 23:10
God wrote:When you prove me wrong, Ill change my name!
oh how fun; answer any one of these correctly to make me a believer
how many exact miles are on my Elan?
my first pet's name?
name and address of the bastard who stole Mike Y's wheels?
my favourite airplane?
serial number of this computer I am at?

-

Doug
- LEC Founder
-
- Posts: 7468
- Joined: Thu 17.04.2003, 06:43
- Location: Oregon Coast, USA
-
by Jodie » Tue 04.04.2006, 23:20
oh how fun; answer any one of these correctly to make me a believer
how many exact miles are on my Elan?
my first pet's name?
name and address of the bastard who stole Mike Y's wheels?
my favourite airplane?
serial number of this computer I am at?
Thou should not test the Lord etc, etc.
I am purley the God of Lotus and not the God of silly things that only you could possibly know.
-
Jodie
- Newbie
-
- Posts: 7
- Joined: Tue 04.04.2006, 19:46
by Doug » Tue 04.04.2006, 23:35
God wrote:I am purley the God of Lotus and not the God of silly things that only you could possibly know.
okay, an easy one for you then:
how many "different body panels" in total were made for the production M100?

-

Doug
- LEC Founder
-
- Posts: 7468
- Joined: Thu 17.04.2003, 06:43
- Location: Oregon Coast, USA
-
Return to Interior
Who is online
Users browsing this forum: No registered users and 7 guests