New Large Bore Exhaust by PECO for S1 Elans with no flat bit

Moderators: theelanman, dapinky, Specky, clemo, Nige, Sy V, Dave Eds, DaveT, Elanlover, muley, Enright, algirdas, nitroman, GeoffSmith

Postby Dovey » Thu 29.06.2006, 01:05

Rambo, would you care to tell me if the chip and exhaust get on in your elan? And have you ported your wastegate?
Never buy anything that was built on a Friday
User avatar
Dovey
Enthusiast
 
Posts: 190
Joined: Mon 11.07.2005, 12:26
Location: Lincoln

Postby Rambo » Thu 29.06.2006, 08:49

Dovey,

Absolutely no problems - no boost creep, no fuel cut off etc and I haven't touched the wastegate. It's stock standard. Hard to tell if there's more performance - it feels even more responsive but the only way to tell, without being subjective, was to have a pre and post rolling road check

Also, I don't seem to have this high pitched whineing at ~5000 RPM that about 3 of you appear to have experienced since fitting the PECO.

As for the engine stalling at low rev's (AB2CV), I had that once but I put it down to a clumsy right foot !!

I think you may be making a call to ESM ??

Mark
User avatar
Rambo
Don't push me
 
Posts: 9144
Joined: Wed 24.12.2003, 00:37
Location: Both sides of the Tweed

Postby ab2cv » Thu 29.06.2006, 19:28

Quick camera-phone before and after snaps of the exhaust.
Image
User avatar
ab2cv
Fanatic
 
Posts: 619
Joined: Wed 30.06.2004, 18:30
Location: Edinburgh

Postby GeoffSmith » Fri 30.06.2006, 22:12

A few of us are experiencing screeching at high revs under load. Could the Peco owners club :lol: post their findings and experienceshere (even if you don't suffer from it) as it's a bit mysterious!

Thanks,

Geoff
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Postby GeoffSmith » Fri 30.06.2006, 22:13

A few of us are experiencing screeching at high revs under load. Could the Peco owners club :lol: post their findings and experienceshere (even if you don't suffer from it) as it's all a bit of a mystery!

Thanks,

Geoff
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Postby GeoffSmith » Fri 30.06.2006, 22:14

A few of us are experiencing screeching at high revs under load. Could the Peco owners club :lol: post their findings and experienceshere (even if you don't suffer from it) as it's all a bit of a mystery!

Thanks,

Geoff
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Postby GeoffSmith » Fri 30.06.2006, 22:16

A few of us are experiencing screeching at high revs under load. Could the Peco owners club :lol: post their findings and experiences here (even if you don't suffer from it) as it's all a bit of a mystery!

Thanks,

Geoff
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Postby GeoffSmith » Fri 30.06.2006, 22:18

:wtf:

Just in case you missed it first time .........

Actually the site went down for a few minutes and I kept hitting the refresh button.
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Postby GeoffSmith » Fri 30.06.2006, 22:20

A few of us are experiencing screeching at high revs under load. Could the Peco owners club :lol: post their findings and experiences here (even if you don't suffer from it) as it's all a bit of a mystery!

Thanks,

Geoff
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Postby GeoffSmith » Fri 30.06.2006, 22:22

Oh. And another one!
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Postby Humph » Sun 02.07.2006, 14:31

Got mine fitted yesterday - well pleased with the result.

Nice sound and with the Chip, a nice increase in performance :-D :D

Have noticed the screech as well, so will post as directed (several times) by Geoff, as I find out more.
User avatar
Humph
Enthusiast
 
Posts: 152
Joined: Mon 22.03.2004, 14:42
Location: Northants

Postby Humph » Sun 02.07.2006, 14:43

Got mine fitted yesterday - well pleased with the result.

Nice sound and with the Chip, a nice increase in performance :-D :D

Have noticed the screech as well, so will post as directed (several times) by Geoff, as I find out more.
User avatar
Humph
Enthusiast
 
Posts: 152
Joined: Mon 22.03.2004, 14:42
Location: Northants

Postby GeoffSmith » Sun 02.07.2006, 15:59

Glad you're pleased Humph

Glad you're pleased as well Humph :smt043
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Exhaust

Postby johnbenk » Sun 02.07.2006, 16:15

Posting removed
Last edited by johnbenk on Mon 03.07.2006, 16:58, edited 1 time in total.
User avatar
johnbenk
The only Gay in the Village
 
Posts: 248
Joined: Wed 21.09.2005, 20:46

Postby GeoffSmith » Mon 03.07.2006, 00:34

John,

We're trying to collect information here if you wouldn't mind re-posting.

Geoff
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Postby matt_elan » Wed 05.07.2006, 13:09

hey guys, got my s2 now and want a better exhaust on it, any light on this screechin prob wiv the peco? and how do i order 1? is there a tel no?
matt
matt_elan
Tinkerer
 
Posts: 80
Joined: Sat 26.03.2005, 22:23

Postby GeoffSmith » Fri 07.07.2006, 17:02

Matt,

Just realised you've got Will's yellow S2 - lucky you. I've just realised I can fit 2 Elans in the garage and my wife bought mine as a birthday present, so I was thinking...

Check my post following your initial question on exhausts. I'm afraid we don't seem to have bottomed out the whistle (so it can't be that bad can it!)

Geoff
Calypso Red S2 #417

USB ElanScan interfaces - £60 incl. UK P&P & £65 incl. ROW P&P
User avatar
GeoffSmith
Kitty Fiddler
 
Posts: 15628
Joined: Fri 03.02.2006, 21:57
Location: S2#417 in Tytherington, Gloucestershire

Postby matt_elan » Mon 10.07.2006, 07:28

thanks 4 ur help geof, ive ordered the peco now! 2 week del time tho :( lol. yeh was lucky snatchin wills s2, a very very good elan! go on.. if u have room 4 another ;)
matt_elan
Tinkerer
 
Posts: 80
Joined: Sat 26.03.2005, 22:23

Postby Dovey » Mon 10.07.2006, 20:30

Been a while...
Got Alans chip. Fitting was easy and no problem. Unfortunately 2 days before it arrived the thermostat went. Sorted that out and finally got to test it all. Fantastic :-D Boosts like it did with just the exhaust but only goes up to 0.8 bar (its a kili) I've tried to get it to go over 0.8 but it just doesnt have it. Total success :-D The Peco and kili are working well together, no problems or fuss. Superb.
Never buy anything that was built on a Friday
User avatar
Dovey
Enthusiast
 
Posts: 190
Joined: Mon 11.07.2005, 12:26
Location: Lincoln

Peco's fitted.

Postby stevieg8571 » Thu 13.07.2006, 00:04

Hi all,

Had mine fitted by Dave at Peco's premises in Birkenhead yesterday.

Looks great, bit louder than I expected (although hopefully this'll reduce after a few more miles) and there's a bit of contact with the valance (but this's probably due to poor bodywork fitment) but overall I'm please with it.
The boost has increased too. Never used to excede .5 Bar, but now stays there for a short while then carries on up the gauge, although not been able to see how far it'll go. Acceleration feels better before the boost too.
No problems with CEL or schreeching/whistling either, thankfully.

Dave's very helpful, and it was good to see another elan owner/car since I got mine!!
User avatar
stevieg8571
Fanatic
 
Posts: 275
Joined: Wed 10.08.2005, 16:02
Location: Preston

PreviousNext

Return to Exhaust

Who is online

Users browsing this forum: No registered users and 3 guests