16" OZ Ruote wheels

Moderators: theelanman, dapinky, Dave Eds, DaveT, Specky, Elanlover, Nige, muley, Enright, algirdas, Sy V, nitroman, GeoffSmith, clemo

16" OZ Ruote wheels

Postby cellaway » Wed 18.10.2023, 11:53

Set of 4 wheels in excellent condition. No marks, scrapes or bumps. The wheels were bought new, fitted but not used and then taken off the car and stored. The fitted Yokohama tyres are free to buyer but are old so cannot be guaranteed. I would have the tyres checked before use

Set of 4 wheels in OK condition, no apparent buckles. Would benefit from a refurb. The tyres have lots of thread but again are old so cannot be guaranteed so are free to buyer. I would have the tyres checked before use

Prices on e bay vary considerably but I suppose £1000 Ono for the best set and £500 Ono the used set

I haven't been able to work out how to attach images so contact me on email : cjjbergy.loa@orange.fr
Last edited by cellaway on Fri 20.10.2023, 09:42, edited 1 time in total.
cellaway
Tinkerer
 
Posts: 52
Joined: Tue 23.09.2003, 17:00
Location: Saintes, France

Re: 17" OZ Route wheels

Postby FunElan » Thu 19.10.2023, 21:41

Elan wheels were 15 or 16?
FunElan
Fanatic
 
Posts: 289
Joined: Sat 20.02.2021, 00:46
Location: Los Angeles, CA

Re: 16" OZ Ruote wheels

Postby cellaway » Fri 20.10.2023, 09:44

Thanks funelan, I measured across the rim and didrn't look at the tyre size. Doh!
cellaway
Tinkerer
 
Posts: 52
Joined: Tue 23.09.2003, 17:00
Location: Saintes, France

Re: 16" OZ Ruote wheels

Postby dapinky » Fri 20.10.2023, 11:45

Chris,

Any chance you can send me pictures of the wheels so we can see the difference between the two sets? If you can't get them to upload (but that shouldn't be a problem now that Geoff has addressed the lack of disc space issue we recently experienced), you can email them to me and I'll post them up - it would help everyone to see them.
Dave

Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it

go on - click this link - you know you want to!
User avatar
dapinky
LEC Administrator
 
Posts: 9968
Joined: Sun 15.10.2006, 12:54
Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).

Re: 16" OZ Ruote wheels

Postby dapinky » Fri 20.10.2023, 15:20

Chris has sent me the pictures, and I hereby attach them for everyone's benefit.

Please note, I have no affiliation with the seller or parts, and only post the pictures as a 'service' for all members here.

Wheels 1.jpg


wheels 2.jpg
You do not have the required permissions to view the files attached to this post.
Dave

Just the one now, but this one's mine! - and it will be finished eventually..... - but also temporary custodian of a project until it is finished enough for Angie to drive it

go on - click this link - you know you want to!
User avatar
dapinky
LEC Administrator
 
Posts: 9968
Joined: Sun 15.10.2006, 12:54
Location: As far west as you can get in West Wales before you become Irish (Pembroke Dock).

Re: 16" OZ Ruote wheels

Postby muley » Fri 20.10.2023, 15:57

Hmm. Federal alloys. Must resist .....
LEC Turbo Nutter
1995 Palacio S2 no 507 : 1991 Aqua Blue SE Honda Jazz 1.3 2006 Ford Focus 2.0 Duratech
User avatar
muley
Moderator
 
Posts: 4483
Joined: Tue 22.04.2003, 09:07
Location: Wokingham, Berks and Waikanae Beach

Re: 16" OZ Ruote wheels

Postby Giniw » Fri 20.10.2023, 16:01

I could be tempted too. I like my car to be stock (an SE one so 15") but the tires sizes could offer more choice nowadays.
Are they really straight & round?

Also, I guess they are heavier than the 15" ones?
User avatar
Giniw
God
 
Posts: 1563
Joined: Sat 21.04.2012, 20:46
Location: France

Re: 17" OZ Route wheels

Postby Rambo » Fri 20.10.2023, 20:48

FunElan wrote:Elan wheels were 15 or 16?


Funny, I was going to say that too when I saw the subject title but I couldn't post it at the time due to LEC gremlins.
User avatar
Rambo
Don't push me
 
Posts: 9085
Joined: Wed 24.12.2003, 00:37
Location: Both sides of the Tweed

Re: 16" OZ Ruote wheels

Postby cellaway » Fri 20.10.2023, 22:16

The 'new" ones have never been used so I think they're perfect. The older set ran fine whilst when they were
on the car and they've been in storage ever since, so they should be good as well. Weight differece should be minimal, they are only alloy.
cellaway
Tinkerer
 
Posts: 52
Joined: Tue 23.09.2003, 17:00
Location: Saintes, France


Return to Elan Parts for Sale (Used Parts For Sale)

Who is online

Users browsing this forum: No registered users and 1 guest